Sensitive Superoxide Biosensor Based on Silicon Carbide Nanoparticles

Direct electron transfer of immobilized superoxide dismutase (Cu, Zn‐SOD) onto silicon carbide (SiC) nanoparticles displays a pair of well defined and nearly reversible redox peaks with formal potential (E°′) of −0.03 V in pH 7.4. The heterogeneous electron transfer rate constant (k_s) and surface coverage (Γ) of immobilized SOD are 11.0±0.4 s⁻¹ and 1.42×10⁻¹¹ mol cm⁻². Biosensor shows fast amperometric response (3s) with sensitivity and detection limit of 1.416 nA μM⁻¹, 1.66 μM, and 1.375 nA μM⁻¹, 2.1 μM for cathodically or anodically detection of superoxide, respectively. This biosensor also exhibits good stability, reproducibility and long life‐time.     

Detection and dosimetry of gamma ray emitted from thallium-201 and technetium-99m based on chemiluminescence technique

This report describes the detection and dosimetry of gamma ray emitted from Thallium-201 (²⁰¹Tl) and Technetium-99m (^99mTc) based on chemiluminescence technique. H₂O₂ produced by two gamma emitter radioisotopes of ²⁰¹Tl and ^99mTc were quantitatively measured by chemiluminescence method. Upon producing H₂O₂ in a luminol alkaline solution, in the presence of diperiodatocuprate, as catalyst a chemical reaction was accrued and consequently the emitted light was measured. The determined H₂O₂ concentration was correlated with the gamma ray detection and dosimetry. The sensitivity of chemiluminescence technique for ²⁰¹Tl and ^99mTc dosimetry was determined to be 0.20 and 0.08 MBq/l (Mega Becquerel per liter) respectively (R.S.D. = %5, N = 3). The plotted calibration curves showed detection limits of 3.24 and 1.76 MBq/l for ²⁰¹Tl and ^99mTc, respectively.     

Accelerating the electron transfer of choline oxidase using ionic-liquid/NH2-MWCNTs nano-composite

A nano-composite consisting of amine functionalized multi-walled carbon nanotubes and a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) was prepared and used for modification of glassy carbon electrode. By immobilizing choline oxidase (ChOx) on the modified electrode, the enzyme direct electron transfer has been achieved. The modified electrode exhibited a pair of well-defined cyclic voltammetric peaks at a formal potential of ?0.395?V versus Ag/AgCl in 0.2?M phosphate buffer solution at pH 7.0. This peak was characteristic of ChOx-FAD/FADH₂ redox couple. The electrochemical parameters such as charge transfer coefficient (??) and apparent heterogeneous electron transfer rate constant (k _s) were estimated to be 0.36 and 2.74?s^?1, respectively. When the enzyme electrode was examined for the detection of choline, a relatively high sensitivity (2.59???A?mM^?1) was obtained. Under the optimized experimental conditions, choline was detected in the concentration range from 6.9?×?10^?3 to 6.7?×?10^?1?mM with a detection limit of 2.7???M. The peak currents of ChOx were reasonably stable and retained 90% of its initial current after a period of 2?months.     

Ionic liquid/graphene oxide as a nanocomposite for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase

By combination of 1-ethyl-3-methyl immidazolium ethyl sulfate as a typical room temperature ionic liquid (IL) and graphene oxide (GO) nanosheets, a nanocomposite was introduced for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase (GOx). The enzyme on the IL–GO-modified glassy carbon electrode exhibited a quasireversible cyclic voltammogram corresponding to the flavine adenine dinucleotide/FADH₂ redox prosthetic group of GOx. At the scan rate of 100 mV?s^?1, the enzyme showed a peak-to-peak potential separation of 82 mV and the formal potential of ?463 mV (vs Ag/AgCl in 0.1 M phosphate buffer solution, pH?7.0). The kinetic parameters of the charge transfer rate constant, the electron transfer coefficient, and the apparent Michaelis–Menten constant were calculated as 1.36 s^?1 and 0.35 and 2.47 μM, respectively. When the modified electrode was examined as a biosensor for glucose determination, a linear range of 2.5–45 nM with detection limit of 0.175 nM (signal to noise?=?3) was obtained. The biosensor was stable for 2 months.     

Cytochrome c embraced in sodium dodecyl sulfate nano-micelle as a homogeneous nanostructured peroxidase

A homogeneous nanostructured enzyme (artificial peroxidase, AP) with suitable catalytic efficiency was generated using bovine heart cytochrome c (Cyt c) and sodium dodecyl sulfate nano-micelles in 50?mM phosphate buffer pH 10.5 at 25?°C. The Michaelis?CMenten (K _m) and catalytic rate (k _cat) of the AP were determined to be 21.6?±?1.2???M and 0.474?±?0.013?s^?1, respectively. The catalytic efficiency of the AP was 0.0219?±?0.002???M^?1s^?1, which was 30?±?1.5?% as efficient as the native horseradish peroxidase (HRP). The mean diameter of AP was measured to be 6.4?nm using dynamic light scattering technique. The UV?CVis spectrometry, circular dichroism, surface tension, isothermal titration calorimetric and electrochemistry methods were utilized for additional characterization of the AP. Together our results suggest that the AP generated here can be used in place of HRP in industrial and commercial fields under some extreme conditions.     

A nano self-assembled artificial peroxidase: spectroscopic and electrochemical investigations

A nano-micelle with highly efficient peroxide activity was constructed by self-assembly of sodium dodecyl sulfate micellar, histidine and hematin in 50 mM phosphate buffer at 25 °C. UV–Vis spectrometry methods were utilized for characterization of the nanostructured material or artificial peroxidase (AP). The Michaelis–Menten (K _m) and catalytic rate (k _cat) constants of the AP were obtained to be 5.5 μM and 0.06 s^?1, respectively, in 50 mM phosphate buffer solution at pH 8.0. The catalytic efficiency of AP was evaluated to be 0.011 μM^?1 s^?1. The AP was also immobilized on a functional multi-wall carbon nanotubes-gold nanoparticles (AuNPs) nano-complex modified glassy carbon electrode (GCE). The transmission electron microscopy method was utilized for the characterization of the nano-materials. The electron-transfer rate constant (k _s) and the apparent Michaelis–Menten constant K _m ^app of the AP modified GCE were evaluated to be 1.36 s^?1 and 0.19 μM, respectively. For a biosensor without a redox protein, the properties of the AP modified GCE were significant and will further benefit from additional studies and improvement.     

Direct electron transfer enhancement of covalently bound tyrosinase to glassy carbon via Woodward's reagent K

This work describes the reaction mechanism for chemical modification of tyrosinase by Woodward's Reagent K and its covalent attachment to a glassy carbon electrode. The spectrophotometric studies revealed that the modification does not cause a significant structural change to tyrosinase. The direct electrochemistry of modified enzyme was achieved after immobilization on an oxidatively activated glassy carbon electrode. The enzyme film exhibited a pair of well-defined quasi-revesible voltammetric peaks corresponding to the Cu (II)/Cu (I) redox couple located in the active site of tyrosinase. The formal potential of immobilized enzyme was measured to be 90mV (vs. Ag/AgCl) in phosphate buffer solution at pH 7.0. The charge-transfer coefficient and apparent heterogeneous electron transfer rate constant were estimated to be 0.5 and 0.9±0.06s(-1), respectively. Finally, the electrochemical behavior of the immobilized enzyme in the presence of caffeic acid and L-3,4-dihydroxyphenylalanine as substrates was investigated. The amperometric study of biosensor toward L-3,4-dihydroxyphenylalanine resulted a linear response in the concentration range from 1.66×10(-6) to 8.5×10(-5)M with detection limit of 9.0×10(-5)M and sensitivity of 135mAμM(-1)cm(-2).     

Direct Voltammetry of Copper,Zinc‐Superoxide Dismutase Immobilized onto Electrodeposited Nickel Oxide Nanoparticles: Fabrication of Amperometric Superoxide Biosensor

Direct electron transfer of immobilized copper, zinc‐superoxide dismutase (SOD) onto electrodeposited nickel‐oxide (NiOx) nanoparticle modified glassy carbon (GC) electrode displays a well defined redox process with formal potential of ?0.03 V in pH 7.4. Cyclic voltammetry was used for deposition of (NiOx) nanoparticles and immobilization of SOD onto GC electrode. The surface coverage (Γ) and heterogeneous electron transfer rate constant (k_s) of immobilized SOD are 1.75×10^?11 mol cm^?2 and 7.5±0.5 s^?1, respectively. The biosensor shows a fast amperometric response (3 s) toward superoxide at a wide concentration range from 10 µM to 0.25 mM with sensitivity of 13.40 nA µM^?1 cm^?2 and 12.40 nA µM^?1 cm^?2, detection limit of 2.66 and 3.1 µM based on anodically and cathodically detection. This biosensor exhibits excellent stability, reproducibility and long life time.