Fluoride ion catalyzed isomerization of 2-aryl-F-butenes [1]

A kinetic study of the fluoride ion catalyzed isomerization of a series of 2-aryl$\text{F}$1-butenes shows the reactions to be pseudo first order in olefin at constant fluoride ion concentration. The resultant Hammett plot is non-linear witb a concave downward break near $\text{σ}$=0. A two step mechanism involving formation of a carbanionic intermediate is proposed. A change in the rate limiting step causes the break in the Hammett plot. Carbanion trapping experiments are also reported.     

Flexibility in the partial reduction of 2,5-disubstituted pyrroles: application to the synthesis of DMDP

[reaction: see text] The partial reduction of electron-deficient 2,5-disubstituted pyrroles has been developed into a flexible procedure that gives control of relative stereochemistry by variation of the reduction conditions. After the reaction, the pyrroline products were dihydroxylated at C-3,4 to give either the cis or trans isomers; this flexibility means that a variety of polyhydroxylated pyrrolidines can be prepared in a short sequence. Finally, this method was applied to a synthesis of the naturally occurring glycosidase inhibitor DMDP.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Comparison of high- and low-resolution electrospray ionization mass spectrometry for the analysis of naphthenic acid mixtures in oil sands process water

The oil sands regions of Northern Alberta, Canada, contain an estimated 1.7 trillion barrels of oil in the form of bitumen, representing the second largest deposit of crude oil in the world. A rapidly expanding industry extracts surface-mined bitumen using alkaline hot water, resulting in large volumes of oil sands process water (OSPW) that must be contained on site due to toxicity. The toxicity has largely been attributed to naphthenic acids (NAs), a complex mixture of naturally occurring aliphatic and (poly-)alicyclic carboxylic acids. Research has increasingly focused on the environmental fate and remediation of OSPW NAs, but an understanding of these processes necessitates an analytical method that can accurately characterize and quantify NA mixtures. Here we report results of an interlaboratory comparison for the analysis of pure commercial NAs and environmental OSPW NAs using direct injection electrospray ionization mass spectrometry (ESI-MS) and high-pressure liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS). Both methods provided very similar characterization of pure commercial NA mixture; however, the m/z selectivity of HPLC/HRMS was essential to prevent substantial false-positive detections and misclassifications in OSPW NA mixtures. For a range of concentrations encompassing those found in OSPW (10-100 mg/L), both methods produced linear response, although concentrations of commercial NAs above 50 mg/L resulted in slight non-linearity by HPLC/HRMS. A three-fold lower response factor for total OSPW NAs by HPLC/HRMS was largely attributable to other organic compounds in the OSPW, including hydroxylated NAs, which may explain the substantial misclassification by ESI-MS. For the quantitative analysis of unknown OSPW samples, both methods yielded total NA concentrations that correlated with results from Fourier transform infrared (FTIR), but the coefficients of determination were not high. Quantification by either MS method should therefore be considered semi-quantitative at best, albeit either method has substantial value in environmental fate experiments where relative concentration changes are the desired endpoints rather than absolute concentrations.     

Liquid chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry determination of N-methylpyrrolidinone in riverine biofilms

A rugged procedure utilizing reversed-phase liquid chromatography with positive-ion electrospray ionization mass spectrometry (LC-MS) along with tandem MS is described for the quantification and confirmation of N-methylpyrrolidinone (NMP) in methanolic extracts of riverine biofilm. The LC-MS method provided a 100-fold improvement in detection limits (2 ng g(-1) with a repeatability of 80-95% based on triplicate analyses) compared to a conventional LC-UV detection procedure and was applicable to quantitative analysis of biofilm samples with little or no clean up. Under low-energy collision induced dissociation (CID) conditions (17 V, laboratory frame of reference, with argon as the collision gas), two product-ions of the [M+H]+ ion were formed at m/z 69 [MH-CH3NH2]+ and m/z 58 [MH-CH3NCH]+ with relative abundances of 30% and 5%, respectively. These CID transitions were used to demonstrate that biofilm uptake of a photocatalytically-generated mixture of NMP was rapid once acclimation was achieved.     

The development and assessment of high‐throughput mass spectrometry‐based methods for the quantification of a nanoparticle drug delivery agent in cellular lysate

The safe use of lipid‐based drug delivery agents requires fast and sensitive qualitative and quantitative assessment of their cellular interactions. Many mass spectrometry (MS) based analytical platforms can achieve such task with varying capabilities. Therefore, four novel high‐throughput MS‐based quantitative methods were evaluated for the analysis of a small organic gene delivery agent: N,N‐bis(dimethylhexadecyl)‐1,3‐propane‐diammonium dibromide (G16‐3). Analysis utilized MS instruments that detect analytes using low‐resolution tandem MS (MS/MS) analysis (i.e. QTRAP or linear ion trap in this work) or high‐resolution MS analysis (i.e. time of flight (ToF) or Orbitrap). Our results indicate that the validated fast chromatography (FC)‐QTRAP‐MS/MS, FC‐ LTQ‐Orbitrap‐MS, desorption electrospray ionization‐collision‐induced dissociation (CID)‐MS/MS and matrix assisted laser desorption ionization‐ToF/ToF‐MS MS methods were superior in the area of method development and sample analysis time to a previously developed liquid chromatography (LC)‐CID‐MS/MS. To our knowledge, this is the first evaluation of the abilities of five MS‐based quantitative methods that target a single pharmaceutical analyte. Our findings indicate that, in comparison to conventional LC‐CID‐MS/MS, the new MS‐based methods resulted in a (1) substantial reduction in the analysis time, (2) reduction in the time required for method development and (3) production of either superior or comparable quantitative data. The four new high‐throughput MS methods, therefore, were faster, more efficient and less expensive than a conventional LC‐CID‐MS/MS for the quantification of the G16‐3 analyte within tissue culture. When applied to cellular lysate, no significant change in the concentration of G16‐3 gemini surfactant within PAM212 cells was observed between 5 and 53 h, suggesting the absence of any metabolism/excretion from PAM212 cells. Copyright © 2014 John Wiley & Sons, Ltd.     

A Continuous-Wave Ho：YA103 Laser with Output 8.5 W Pumped by a 1.91μm Laser at Room Temperature

A cw high efficient Ho：YAI03 laser pumped by 1.91 μm diode-pumped Tm：YLF laser at room temperature is realized. The maximum output power reaches 8.5 W when the incident pump power is 15.6 W. The slope efficiency is 63.7%, and the Tm：YLF to Ho：YAP optical conversion efficiency is 54.5%. The laser wavelength is 2118.3nm when the transmission of output coupler is 30%. The beam quality factor is M2 -1.39 measured by the traveling knife-edge method.     

奥尔堡PBL模式对提升有机波谱分析教学效果的启示

概述了有机波谱分析课程教学中存在的主要问题,介绍了奥尔堡PBL模式的主要特点和优势,分析了将奥尔堡PBL模式用于有机波谱分析课程教学的必要性和可行性,并从课时分配、教学内容、教学方式和考核方式等4方面提出了教学改革方案,旨在提高教学效果。     

High-power supercontinuum generation in highly nonlinear, dispersion-shifted fibers by use of a continuous-wave Raman fiber laser

High-power supercontinua are demonstrated in highly nonlinear, dispersion-shifted fibers with a continuous-wave Raman fiber laser. Supercontinuum growth is experimentally studied under different combinations of fiber length and launch power to show output powers as high as 3.2 W and bandwidths greater than 544 nm. Modulation instability (MI) is observed to seed spectral broadening at low launch powers, and the interplay between MI and stimulated Raman scattering plays an important role in the growth of the continuum at high launch powers. The effect on continuum generation of parametric four-wave mixing coupled with the higher-order dispersion properties of the fiber is investigated.