Synthesis, characterization, catalytic, electrochemical and thermal properties of tetradentate Schiff base complexes

In this study, the Schiff base ligands H₂L¹–H₂L³ and their Cu^II, Co^II, Ni^II, Fe^III Ru^III and VO^IV complexes have been prepared and characterized by spectroscopic and analytical techniques. All the complexes are mononuclear. Keto-enol tautomeric forms of the ligands have been investigated in polar and apolar solvents. The ligands favor the keto-form in the C₇H₈ and C₆H₁₄. The C–C coupling reaction of the 2,6-di-t-butylphenol has been investigated by the Co^II and Cu^II complexes. Thermal properties of the complexes have been assessed using thermal techniques and similar properties were found. In the Fe^III and Ru^III complexes, firstly, the coordinated water molecule is lost from the complex; in the second step, the chloride ion leaves the molecule in the 300–350 °C temperature range. Finally, the complexes decompose to the appropriate metal oxide at the higher temperature ranges. The electrochemical properties of the complexes have been studied in the two different solvents (DMF and CH₃CN).     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Identification of radiation‐induced radical structure in azocalix[4]arene: an EPR study

A macrocyclic azocalix[4]arene (1) based ester derivative was synthesized. The single crystals of azocalix[4]arene were produced by slow evaporation of concentrated ethyl acetate solutions. These single crystals were exposed to ⁶⁰Co gamma rays with a dose rate of 0.980 kGy h^‐1 for 48 and 72 h to produce a stable free radical. Electron paramagnetic resonance (EPR) measurements were performed in three mutually perpendicular planes of the single crystal in the magnetic field, in addition, temperature dependence of the EPR signal was studied between 120 K and 450 K. The spectra were found to be temperature and angular dependent. Analysis based on the spectra recorded showed that a free radical was formed by fission of a C–H bond. This radical is described as ^?C_aHC_bH₃ The averages of the principal values of the hyperfine parameters and g‐factor are: g = 2.0034, A_Ha = 1.28 mT, A_H1=H2 = 1.00 mT, and A_H3 = 0.49 mT. Copyright © 2013 John Wiley & Sons, Ltd.     

Ionic conductivity of PVdF-co-HFP/LiClO4 in terms of free volume defects probed by positron annihilation lifetime spectroscopy

ABSTRACT

Polymers based on ionic conducting materials have important interest because of their potential applications in polymer electrolytes and membranes for fuel cell application. PVdF-co-HFP poly(viniliden-co-hexafluoropropylene) was chosen as a polymer matrix because of its high ionic conductivity and better mechanical properties. Polymer matrix composites were prepared with various amounts of LiClO₄ salt by a solution casting method. The sample-ionic conductivity measurements were recorded by AC impedance analyzer at different frequencies from 0.1?Hz to 20?MHz and at different temperatures from 273 to 373?K.

The changes of nanoscopic free volume and free volume fraction in these materials were investigated in terms of temperature from 273 to 373?K using Positron Annihilation Lifetime Spectroscopy (PALS) and Simha-Somcynsky (SS) Hole Theory. The free volume had a bump at about 3% in weight percentage of the salt and there is a slight increase after 10%. The effects of weight percentages of LiClO₄ and temperature were investigated. The mechanism of the ac ionic conductivity was presented in terms of the free volume models, however thermo-occupancy function justifies the best accurate representation of the data.     

The elastic,electronic, and optical properties of PtSi and PtGe compounds

The structural, mechanical, electronic and optical properties of orthorhombic PtSi and PtGe were investigated using norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters and bulk modulus for PtSi and PtGe have been compared with the experimental and theoretical values. The second-order elastic constants were calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities and Debye temperature have also been estimated. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valance electrons and the effective optical dielectric constant were calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

Synthesis and structure elucidation of 25,26,27,28-tetramethylcalix[4]arene tetraketone using 1D and 2D NMR spectroscopies

The ¹H and ¹³C NMR spectra of the new calix[4]arene-based tetraketone were completely assigned by one- and two-dimensional homo- and heteronuclear experiments (¹H–¹H COSY, ¹H–¹³C HMQC, and HMBC) at 400 and 100 MHz, respectively, at 25 °C standard pulse sequence. ¹H and ¹³C spectra were measured at room temperature for 25,26,27,28-tetramethylcalix[4]arene tetraketone (1). ¹³C{¹H}, DEPT and NMR techniques were used to distinguish the methyl, methylene and methine carbon resonance signals of calix[4]arene 1. Correlation of 1D (¹H, ¹³C{¹H}, DEPT) and 2D (HMQC and HMBC) NMR data was used to completely assign various overlapping and broad signals of calix[4]arene 1. Heteronuclear multibond correlation (HMBC) studies were used to completely assign various carbon resonances. Our results show that the conformation of calix[4]arene 1 in the solution is very similar to the cone conformation reported in the literature.     

The Synthesis of Ester and Ketone Derivatives of Azocalix[4]arene Containing Chromogenic Groups

Azocalix[4]arenes were prepared by linking 4-ethylaniline, 4-n-butylaniline, 4-acetamide aniline and 2-aminothiazol to calix[4]arene through a diazo-coupling reaction. A new family of azocalix[4]arenes, L1–L12, have been prepared by the incorporation of acetyl, benzoyl, and methyl ketone units to azocalix[4]arene. Characterization of the synthesized compounds was carried using elemental analyses, UV–Vis, IR and ¹H NMR spectroscopic studies.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.