Mechanistic insight into the reactivity of oxotransferases by novel asymmetric dioxomolybdenum(VI) model complexes

The asymmetric molybdenum(VI) dioxo complexes of the bis(phenolate) ligands 1,4‐bis(2‐hydroxybenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐4‐methylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐3,5‐dimethylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐3,5‐di‐tert‐butylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐4‐flurobenzyl)‐1,4‐diazepane, and 1,4‐bis(2‐hydroxy‐4‐chlorobenzyl)‐1,4‐diazepane (H₂(L1)–H₂(L6), respectively) have been isolated and studied as functional models for molybdenum oxotransferase enzymes. These complexes have been characterized as asymmetric complexes of type [MoO₂(L)] 1–6 by using NMR spectroscopy, mass spectrometry, elemental analysis, and electrochemical methods. The molecular structures of [MoO₂(L)] 1–4 have been successfully determined by single‐crystal X‐ray diffraction analyses, which show them to exhibit a distorted octahedral coordination geometry around molybdenum(VI) in an asymmetrical cis‐β configuration. The Mo? O_oxo bond lengths differ only by ≈0.01 Å. Complexes 1 , 2 , 5 , and 6 exhibit two successive Mo^VI/Mo^V (E_1/2, ?1.141 to ?1.848 V) and Mo^V/Mo^IV (E_1/2, ?1.531 to ?2.114 V) redox processes. However, only the Mo^VI/Mo^V redox couple was observed for 3 and 4 , suggesting that the subsequent reduction of the molybdenum(V) species is difficult. Complexes 1 , 2 , 5 , and 6 elicit efficient catalytic oxygen‐atom transfer (OAT) from dimethylsulfoxide (DMSO) to PMe₃ at 65 °C at a significantly faster rate than the symmetric molybdenum(VI) complexes of the analogous linear bis(phenolate) ligands known so far to exhibit OAT reactions at a higher temperature (130 °C). However, complexes 3 and 4 fail to perform the OAT reaction from DMSO to PMe₃ at 65 °C. DFT/B3LYP calculations on the OAT mechanism reveal a strong trans effect.     

Pyridazine based scorpionate ligand in a copper boratrane compound

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed. The reaction of copper(II) chloride with K[Tn(tBu)] in water gave the same product 2, but a formal reduction of the metal center from Cu(II) to Cu(I) occurred. When adding tricyclohexyl phosphine to the reaction mixture of K[Tn(R)] (R = tBu, Me) and copper(I) chloride in MeOH, the distorted tetrahedral Cu complexes [Cu{Tn(R)}(PCy(3))] (R = tBu 3, Me 4) were formed. Compound 4 is exhibiting an "inverted" κ(3)-H,S,S, coordination mode. The copper boratrane 1 was further investigated by density functional theory (DFT) calculations for a better understanding of the M→B interaction involving the d(8) electron configuration of Cu.     

Unusual nonoctahedral geometry with molybdenum oxoimido complexes containing η2-pyrazolate ligands

The preparation and oxygen-atom-transfer (OAT) reactivity of oxoimido complexes [MoO(N-t-Bu)(t-Bu(2)-4-Rpz)(2)] [where R = H (1), Br (2), and Me (3); t-Bu(2)pz = 3,5-di-tert-butylpyrazolate] are reported. The reaction of the potassium salt of the respective pyrazolate ligands and the molybdenum oxoimido precursor, [MoO(N-t-Bu)Cl(2)(dme)] (dme = dimethoxyethane), in toluene afforded complexes 1-3 in good yields. The complexes were fully characterized by (1)H and (13)C NMR and IR spectroscopy, mass spectrometry, elemental analysis, and single-crystal X-ray crystallography. The solid-state structures reveal that, in each case, the molybdenum center is coordinated by one oxo, one N-t-Bu group, and two sterically demanding pyrazolate ligands via their two adjacent nitrogen atoms in an η(2) fashion. Coordination around the metal center is severely distorted from octahedral and might be seen as closely approaching a distorted trigonal-prismatic geometry, which is relevant to the active site of dimethyl sulfoxide reductase in its oxidized form. The potential utility of all of the complexes 1-3 for OAT reactivity toward PMe(3) at room temperature is examined, and plausible mechanistic pathways are explored by density functional theory calculations. Furthermore, the complexes reported here open a new and convenient entry into mixed oxoimidomolybdenum complexes.     

Dioxomolybdenum(VI) complexes with pyrazole based aryloxide ligands: synthesis, characterization and application in epoxidation of olefins

Synthesis, characterization, and epoxidation chemistry of four new dioxomolybdenum(VI) complexes [MoO(2)(L)(2)] (1-4) with aryloxide-pyrazole ligands L = L1-L4 is described. Catalysts 1-4 are air and moisture stable and easy to synthesize in only three steps in good yields. All four complexes are coordinated by the two bidentate ligands in an asymmetric fashion with one phenoxide and one pyrazole being trans to oxo atoms, respectively. This is in contrast to the structure found for the related aryloxide-oxazoline coordinated Mo(VI) dioxo complex 5. This was confirmed by the determination of the molecular structures of complexes 1-3 by X-ray diffraction analyses. Compounds 1-4 show high catalytic activities in the epoxidation of various olefins. Cyclooctene (S1) is converted to its epoxide with high activity, whereas the epoxidation of styrene (S2) is unselective. Internal olefins (S3 and S4) are also acceptable substrates, as well as the very challenging olefin 1-octene (S5). Catalyst loading can be reduced to 0.02 mol % and the catalyst can be recycled up to ten times without significant loss of activity. Supportive DFT calculations have been carried out in order to obtain deeper insights into the electronic situation around the Mo atom.     

Novel pyridazine based scorpionate ligands in cobalt and nickel boratrane compounds

Heating of 6-methylpyridazine-3-thione (HPn(Me)) and 6-tert-butylpyridazine-3-thione (HPn(tBu)) with potassium borohydride in diphenylmethane in a 3:1 ratio gave two new scorpionate ligands K[HB(Pn(Me))(3)] and K[HB(Pn(tBu))(3)]. Single crystal X-ray diffraction analysis of the methyl derivative K[HB(Pn(Me))(3)] revealed a dimeric species with one potassium atom coordinated by six sulfur atoms of two scorpionate ligands and a second potassium atom coordinated by three nitrogen atoms of one of the two ligands as well as by three water molecules. The reaction of K[HB(Pn(tBu))(3)] with nickel(II) chloride or cobalt(II) chloride in CH(2)Cl(2) led to the new boratrane compounds [M{B(Pn(tBu))(3)}Cl] (M = Ni 1, Co 3) where a formal reduction of the metal ions to Ni(I) and Co(I), respectively, and activation of the B-H bond occurred. Similar reactivity was observed by employing K[HB(Pn(R))(3)] (R = Me, tBu) and nickel(II) chloride in water. Reaction with cobalt(II) chloride in water also gave boratrane compounds [Co{B(Pn(R))(3)}(Pn(R))] (R = tBu 4, Ph 5), but instead of a chloride a bidentate pyridazinethionate ligand from a defragmentated scorpionate is found in the molecules. The molecular structures of all nickel and cobalt compounds were determined by single crystal X-ray diffraction analyses confirming the formation of boratranes in compounds 1-5. Magnetic measurements confirm the reduced oxidation states and the paramagnetic character of the Ni(I) and Co(I) complexes. Supportive DFT studies were carried out for a better understanding of the electronic nature of the metal-boron bond of the boratrane complexes.     

Effect of substitution of Ce on superconducting properties of Bi1.7Pb0.3Sr2Ca2−x Ce x Cu3O10+δ system

We have investigated the superconducting properties of the Bi_1.7 Pb_0.3Sr₂Ca_2−xCe _x Cu₃O_10+δ system with x=0.00, 0.02, 0.04, 0.08 and 0.1 by X-ray diffraction and magnetic susceptibility. The substitution of Ce for Ca has been found to drastically change the superconducting properties of the system. X-ray diffraction studies on these compounds indicate decrease in the c-parameter with increased substitution of Ce at Ca site and volume fraction of high T _c (2 : 2 : 2 : 3) phase decreases and low T _c phase increases. The magnetic susceptibility of this compound shows that the diamagnetic on set superconducting transition temperature (onset) varies from 109 K to 51 K for x=0.00, 0.02, 0.04, 0.08 and 0.1. These results suggest the possible existence of Ce in a tetravalent state rather than a trivalent state in this system; that is, Ca²⁺ → Ce⁴⁺ replacement changes the hole carrier concentration. Hole filling is the cause of lowering T _c of the system.     

Self-assembled growth of nanostructural Ge islands on bromine-passivated Si(111) surfaces at room temperature

We have deposited relatively thick (∼60 nm) Ge layers on Br-passivated Si(111) substrates by thermal evaporation under high vacuum conditions at room temperature. Ge has grown in a layer-plus-island mode although it is different from the Stranski-Krastanov growth mode observed in epitaxial growth. Both the islands and the layer are nanocrystalline. This appears to be a consequence of reduction of surface free energy of the Si(111) substrate by Br-passivation. The size distribution of the Ge nanoislands has been determined. The Br-Si(111) substrates were prepared by a liquid treatment, which may not produce exactly reproducible surfaces. Nevertheless, some basic features of the nanostructural island growth are reasonably reproducible, while there are variations in the details of the island size distribution.