Die F?llung von Vanadium mit Phenarsazins?ure

Zusammenfassung Es wird über die Möglichkeit einer Bestimmung des Vanadat-Ions mit Phenarsazinsäure berichtet. Vanadat fällt mit dem Reagens in saurem Medium bei p_H 2 als hellbrauner flockiger Niederschlag quantitativ aus, wenn ein mehr als dreifacher molarer Überschuß an Phenarsazinsäure angewendet wird. Die Bestimmung des Vanadiums im gebildeten Niederschlag erfolgt maßanalytisch. Über einige Trennungsmöglichkeiten wird berichtet.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.