Photoexcitation of the potassium octacyanotungstate(IV)· 5–nitro-1,10–phenanthroline system: kinetics and mechanism of the reaction

The kinetics of thermal reactions of the photochemically-generated species [W(CN)7OH]4− and [W(CN)6–(CNH)(H2O)]2− with 5–nitro-1,10–phenanthroline (nitrophen) in basic and acidic media, respectively, were studied in buffer solutions at pH 4.2–10.6 and ionic strength 7.5×10−2kg−1 at 20°C. The quantum yield for the formation of the photoproduct was calculated and found to depend upon pH and the ligand and [W(CN)8]4− concentrations. The rate constants and quantum yields were less compared with 1,10–phenanthroline due to the electron-withdrawing inductive effect of the nitro group in nitrophen, which makes the latter a weaker ligand. The pseudo-first-order rate constant and quantum yield values in acidic media are higher than in basic media and the mechanisms of the photochemical substitution are different in the two media. This revised version was published online in June 2006 with corrections to the Cover Date.     

Colloidal gold probe based rapid immunochromatographic strip assay for cortisol

A rapid and semi-quantitative immunochromatographic strip (ICS) test for cortisol analysis in serum was developed. The test strip was based on a competitive assay format. Colloidal gold nanoparticles were synthesized and coupled with cortisol-3-carboxymethyloxime-adipic acid dihydrazide-bovine serum albumin (F-3-CMO-ADH-BSA) antigen to directly compete with cortisol in human serum samples. F-3-CMO-ADH-BSA-gold label and uncoupled colloidal gold nanoparticles were appropriately characterized using UV-vis spectroscopy, transmission electron microscopy and atomic force microscopy. Anticortisol antibody raised against F-3-CMO-BSA immunogen in New Zealand white rabbits was coated on the NC membrane as test line. Anti-BSA antibody was used as control line. The lower detection limit of the ICS test was 30 ngmL(-1) with visual detection and was completed in 10 min. About 30 human serum samples were also analyzed by the developed strip test and their range of cortisol concentration was established. The developed ICS test is rapid, economic and user friendly.     

Selective capturing and detection of Salmonella typhi on polycarbonate membrane using bioconjugated quantum dots

Present work demonstrates the utilization of surface modified polycarbonate (PC) membrane as solid phase and antibody conjugated CdSe/ZnS quantum dots (QDs) as fluorescent label for the sensitive and selective detection of Salmonella typhi (S. typhi) in water in a period of 2.5 h. PC membrane was surface modified with glycine and activated by EDC/NHS for immobilization of S. typhi specific IgG. Antibody immobilized porous PC membrane was incubated with bacteria contaminated water for immunocapturing of S. typhi. Antibody conjugated QDs were also prepared by using carbodiimide chemistry. Both modified PC membrane and quantum dots were characterized by using various modern analytical tools. It was estimated that 1.95 molecules of QDs were successfully bio-conjugated per unit of IgG. PC membrane with captured bacteria was incubated with prepared IgG conjugated QDs for the formation of sandwich complex. Analysis of the regions of interest (ROI) in fluorescent micrographs showed that newly developed method based on PC and fluorescent QDs has 100 times higher detection sensitivity (100 cells/mL) as compared with detection using conventional dye (FITC) based methods.     

Polyaniline based nucleic acid sensor

Twenty-bases long NH2-modified DNA and PNA probes specific to a pathogen (Mycobacterium tuberculosis) were covalently immobilized onto a polyaniline (PANI)/Au electrode to detect nucleic acid hybridization with complementary, one-base mismatch and noncomplementary targets within 30 s using Methylene Blue. The PNA-PANI/Au electrode exhibits improved specificity (1000 times) and detection limit (0.125 x 10(-18) M) as compared to that of the DNA-PANI/Au electrode (2.5 x 10(-18) M). These PNA-PANI/Au electrodes can be utilized for detection of hybridization with the complementary sequence in 5 min sonicated M. tuberculosis genomic DNA within 1 min of hybridization time. These DNA-PANI/Au and PNA-PANI/Au electrodes can be used 6-7 and 13-15 times, respectively.     

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Cysteine modified NH(2)-end peptide nucleic acid (PNA) (24-mer) probe and 5'-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml(-1)) over the DNA-Au bioelectrode (3.0 ng ml(-1)). The values of the association (k(a)) and dissociation rate constant (k(d)) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 x 10(4) m(-1) s(-1) and 3.6 x 10(-3) s(-1), respectively.     

Environmentally degradable LLDPE/esterified styrene-maleic anhydride (ESMA) blends

LLDPE was blended with esterified styrene-maleic anhydride (ESMA) to improve the environmental degradation characteristics of LLDPE. ESMA was synthesized by esterifying styrene maleic anhydride (SMA) with n-decanol. LLDPE was blended with ESMA (EDP blends) and SMA separately in a single screw extruder by melt mixing. Composition of ESMA was varied from 20 to 40 wt% in the blends. LLDPE grafted with glycidyl methacrylate (LLDPE-g-GMA) was used as compatibilizer to improve the compatibility. Scanning electron photomicrograph (SEM) of cryofractured impact specimens showed significant reduction in domain size and uniform distribution of ESMA in LLDPE matrix in presence of compatibilizer in 70/30 blends. Environmental degradability was assessed by subjecting the films to soil burial test and exposure to buffer solution of different pH. Environmental degradation was followed by measuring the periodic change in weight of the blend samples. Films were exposed to accelerated and natural weathering and photodegradation was assessed by noting the embrittlement time of the film. Films of compatibilized blends fragmented at a faster rate than the films of uncompatibilized blend. Carbonyl index of films subjected to natural weathering was also found to be higher than that for the virgin LLDPE films.     

Poly(PEGDMA‐MAA) copolymeric micro and nanoparticles for oral insulin delivery

Poly(ethylene glycol) dimethacrylate (PEGDMA) and methacrylic acid (MAA) based micro and nanoparticles were prepared and evaluated as a carrier for oral delivery of insulin. PEGDMA was synthesized by esterification reaction of the PEG4000 with MAA in the presence of an acid catalyst. Particles of different size were prepared by emulsion polymerization reaction using different concentration of sodium lauryl sulphate (SLS) as an emulsifying agent. Synthesized copolymeric particle were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), scanning electron microscopy, and acid value. The mean particle diameter of the polymeric micro and nanoparticles at various physiologically relevant pH values was measured using dynamic light scattering. Insulin loading efficiency of the particles was found to be directly proportional to the particle size and inversely proportional to the acid value of the particles. In vitro insulin release studies from various insulin loaded particles were performed by simulating the gastrointestinal tract conditions using HPLC. At pH 2.5, the release of insulin from polymeric particles was observed in the range of 5–8% while a significant higher release (20–35%) was observed at pH 7.4 during first 15 min of in vitro release. Largest size copolymeric particles of 8.3 µm also showed the highest efficiency to reduce the blood glucose level in diabetic rabbits. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and Characterisation of Bis (η5-Cyclopentadienyl) N,N-Disubstituted Dithiocarbamato Chloro Oxotungsten (VI) Complexes

Bis (η⁵-cyclopentaienyl) N,N-disubstituted dithiocarbamato chloro oxotungsten (VI) complexes of the type η⁵-Cp₂WO(S₂CNR₂)Cl and η⁵-Cp₂WO(S₂CNRR')Cl (where R=Me, Et and i-Pr and R'=Cyhx) have been prepared by the reaction of bis (η⁵-cyclopentadienyl) oxotungsten (VI) dichloride with sodium salts of dithiocarbamic acids in refluxing tetrahydrofuran. Infrared spectral studies demonstrate that in these complexes dithiocarbamate ligands are bidentate. Therefore, tungsten (VI) atom may be assigned a coordination number 6 in all these complexes. Elemental analyses of these compounds have also been carried out. Electronic spectra have been recorded for all the six complexes.