Strongly confined quantum wire states in strained T-shaped GaAs/InAlAs structures

The confinement energy of T-shaped quantum wires (QWRs), which were fabricated by the cleaved edge overgrowth technique in a way that the QWRs form at the intersection of In_0.2Al_0.8As stressor layers and the overgrown (1 1 0) GaAs quantum well (QW), is examined using micro-photoluminescence spectroscopy. Photoluminescence (PL) signals from individual QWRs can be spatially resolved, since the strained films are separated by 1 μm wide Al_0.3Ga_0.7As layers. We find that due to the tensile strain being transmitted to the QW, the confinement energy of the QWRs rises systematically up to 40 meV with increasing thickness of the stressor layers. By reducing the excitation power to 0.1 μW the QWR PL emission occurs 48 meV redshifted with respect to the QW. All QWR peaks exhibit smooth lineshapes, indicating the absence of pronounced exciton localization.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

DEMONSTRATION THAT PHOSPHORESCENT 6-BROMO-2-NAPHTHYL SULFATE CAN BE USED TO PROBE HEME ACCESSIBILITY IN HEME PROTEINS

The phosphorescence properties of 6-bromo-2-naphthyl sulfate (BNS) in aqueous solution were studied. The phosphorescence lifetime is several hundred microseconds and is self-quenched. Although a fluorescent photoproduct is formed from BNS, it does not interfere with the decay properties of triplet-state BNS and its utility as a probe of the accessibility of the heme group in heme proteins. Quenching of BNS phosphorescence does not occur for the non-heme protein lysozyme and apomyoglobin but occurs by a dynamic mechanism with a quenching constant of 1-2 x 10(9) M-1 s-1 for cytochrome c and myoglobin and with a quenching constant of 6.2 x 10(9) M-1 s-1 for protoporphyrin IX. The phosphorescence of an inclusion complex of 1-bromonaphthalene and beta-cyclodextrin is not quenched by heme-containing proteins. The temperature and viscosity dependencies of the rate with which BNS phosphorescence is quenched by microperoxidase-11 are consistent with unit quenching efficiency. These results indicate that quenching of BNS phosphorescence occurs only upon contact with the quencher, and the quenching constant can be used to assess the degree of accessibility of the heme group.     

Heterocyclic Spiro-naphthalenones. Part III. Synthesis and reactions of some spiro [naphthalene-1,2′-pyrrolidin]-2-ones and spiro [naphthalene-2,2′-pyrrolidin]-1-ones

The spironaphthalen-2-ones 2, 10 and 18 were prepared by N-bromosuccinimide (NBS) oxidation of 1, 9 and 17 respectively, whereas spironaphthalen-1-ones 24 and 25 were obtained by treating 23 with NBS. The stereoisomeric reduction products 29, 30 and 32 obtained from 24 and 25 , gave the pentacyclic compound 33 on treatment with polyphosphoric acid.     

Activation of dimethyl zirconocene by methylaluminoxane (MAO)-size estimate for Me-MAO(-) anions by pulsed field-gradient NMR

In a study of the reaction system MAO/(C5H5)2ZrMe2, the size of the ion pair [(C5H5)2Zr(mu-Me)2AlMe2]+ [Me-MAO]- was determined by pulsed field-gradient NMR of its cationic moiety. A mean effective hydrodynamic radius of 12.2-12.5 A, determined from diffusion rates in benzene solution at different zirconocene and MAO concentrations, indicates that the ion pair remains associated even at the lowest concentrations studied. At elevated concentrations, aggregation to ion quadruples or higher aggregates is indicated by an apparent size increase and by shifts of the C5H5 and Me 1H NMR signals. The equilibrium constant for the reaction [(C5H5)2ZrMe+...Me-MAO-] + 1/2Al2Me6 right harpoon over left harpoon [(C5H5)2Zr(mu-Me)2AlMe2]+ [Me-MAO]- changes at different Al/Zr ratios; this indicates that MAO contains various species that produce Me-MAO- anions with different Lewis basicities. The volume of the Me-MAO- anion suggests that it contains 150-200 Al atoms.     

Stark- and Zeeman-effect of resonance lines of Ba I

Laserspectroscopic investigations were performed on a collimated atomic beam of barium (natural isotope abundance). The metastable ground levels (³D_1,2,3 and ¹D₂) of the investigated lines were populated by a discharge burning in barium vapour directly in front of the oven hole. We could investigate 14 spectral lines between 580 and 690 nm. The tensor polarizabilities of the upper and the lower level as well as the differences in the scalar polarizabilities could be determined. Spectra in magnetic fields up to 0.03 Tesla showed no deviation from the pattern resulting from a simple Russell-Sounders coupling.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

An investigation of the two electron chemical bond calculating energy expectation values from density matrix partitionings. II. The heteronuclear case HeH+

Bond energy contributions calculated from first and second order density matrix terms as partitioned by Ruedenberg's procedure have been obtained for HeH⁺ in the ground state and in the first excited 1Σ⁺. For the chemically bonded ground state the full partitioning is investigated for all internuclear distances R. The wavefunctions used for calculating the density matrices are obtained from an SCF calculation at near Hartree-Fock quality, using Slater orbitals with exponents which for each R are optimized simultaneously with the coefficients. For the excited state a limited CI has been performed. The results for promotional, charge transfer, and interference terms for kinetic and potential bond contributions are presented in the form of energy plots E(R). Starting from the promoted atoms and subsequently allowing for charge transfer the importance of the electron interaction is demonstrated by the unusually low quasiclassical electron repulsion curve due to electronic charge transfer, which makes an essential contribution to the decrease in energy during bond formation.     

On the use of two-dimensional potential surface cross sections in the discussion of vibronic spectra of transition metal complexes

For purposes of interpreting broad band electronic spectra of complexes, the 3N-5 dimensional potential energy hypersurface may be reduced substantially. Consideration of the geometry of the orbital transition involved allows selection of an appropriate cross section, depending on which features should be represented. In addition, the orbital transition geometry predicts which vibrational modes will contribute significantly to the width of the spectrum. In the particular case of the first and second spin-allowed bands in d³ and d⁶ complexes, α_1g and ?_g modes are responsible for the band width.