Surface modified SPIONs‐Cr(VI) ions‐immobilized organic‐inorganic hybrid as a magnetically recyclable nanocatalyst for rapid synthesis of polyhydroquinolines under solvent‐free conditions at room temperature

In this work, a magnetic hybrid dichromate nanocomposite with triphenylphosphine surface modified superparamagnetic iron oxide nanoparticles (SPIONs) as a recyclable nanocatalyst was designed, prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR) spectra, X‐ray diffraction (XRD) pattern analysis, vibrating sample magnetometer (VSM) curves, X‐ray fluorescence (XRF) analysis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images and dynamic light scattering (DLS) analysis. Then, it was used in a green and efficient procedure for one‐pot multicomponent synthesis of polyhydroquinoline derivatives by the condensation of aldehydes, dimedone or 1,3‐cyclohexadione, ethyl acetoacetate and ammonium acetate. This protocol includes some new and exceptional advantages such as short reaction times, low catalyst loading, high yields, solvent‐free and room temperature conditions, easy separation and reusability of the catalyst.     

Simultaneous analysis of non‐steroidal anti‐inflammatory drugs using electrochemically controlled solid‐phase microextraction based on nanostructure molecularly imprinted polypyrrole film coupled to ion mobility spectrometry

A simple, rapid, and highly sensitive method for simultaneous analysis of anti‐inflammatory drugs (naproxen, ibuprofen, and mefenamic acid) in diluted human serum was developed using the electrochemically controlled solid‐phase microextraction coupled to ion mobility spectrometry. A conducting molecularly imprinted polymer film based on polypyrrole was synthesized for the selective uptake and release of drugs. The film was prepared by incorporation of a template molecule (naproxen) during the electropolymerization of pyrrole onto a platinum electrode using cyclic voltammetry method. The measured ion mobility spectrometry intensity was related to the concentration of analytes taken up into the films. The calibration graphs (naproxen, ibuprofen, and mefenamic acid) were linear in the range of 0.1–30 ng/mL and detection limits were 0.07–0.37 ng/mL and relative standard deviation was lower than 6%. On the basis of the results obtained in this work, the conducting molecularly imprinted polymer films as absorbent have been applied in the electrochemically controlled solid‐phase microextraction and ion mobility spectrometry system for the selective clean‐up and quantification of trace amounts of anti‐inflammatory drugs in human serum samples. Scanning electron microscopy has confirmed the nano‐structure morphology of the polypyrrole film.     

Recent advances in synthesis of 2-pyridones: a key heterocycle is revisited

Owing to the versatile applications in different areas including biology, natural compounds, dyes, and fluorescent materials, the synthesis of 2-pyridone compounds is an important research field and has attracted a great deal of attention. In this review, 2-pyridones new synthetic methods are classified to tree classes including reactions based on pyridine rings, cyclization, and cycloaddition reactions.     

NH2SO3H and H6P2W18O62 · 18H2O-Catalyzed,Three-Component,One-Pot Synthesis of Benzo[c]acridine Derivatives

We report here two simple methods for the synthesis of benzo[c]acridine derivatives from three-component, one-pot condensation of 1-naphthylamine, dimedone, and a variety of substituted aldehydes in the presence of a catalytic amount of NH₂SO₃H or H₆P₂W₁₈O₆₂ · 18H₂O under solvent-free conditions at 120 °C or in refluxing ethanol.     

Preparation and evaluation of an ion imprinted sol–gel material for selective solid-phase extraction of Ni(II)

An ion imprinted silica sorbent was prepared using a sol–gel process for selective extraction of Ni(II) ions from water samples. Bis(dibenzoylmethanto)nickel(II) complex was used as template; phenyltrimethoxysilane and 3-aminopropyltriethoxysilane as functional monomers and tetraethylorthosilicate as reticulating agent. The material was packed in solid-phase extraction (SPE) column. The effect of sampling volume, elution conditions, sample pH and sample flow rate on the extraction of Ni ions from water samples were studied. The relative selectivity coefficients of imprinted sorbent for Ni(II)/Co(II), Ni(II)/Cu(II) and Ni(II)/Cd(II) were 23.7, 30.3 and 24.4, times greater than non-imprinted sorbent, respectively. The relative standard deviation of the eight replicate determinations of Ni(II) was 4.2%. The detection limit was 0.9 µg L^?1 using flame atomic absorption spectrometry. The developed method was successfully applied to the determination of trace nickel in water samples.     

New materials based on thiazolothiazole and thiophene candidates for optoelectronic device applications: theoretical investigations

We report theoretical analysis on the geometries and electronic properties of new conjugated compounds based on thiazolothiazole synthesized by Ando et al. (Synth. Met., 156:327 [13]). The theoretical ground-state geometry and electronic structure of the studied molecules were investigated by the density functional theory (DFT) method at Becke’s three-parameter functional and Lee–Yang–Parr functional (B3LYP) level with 6-31G(d,p) basis set. The effects of the ring structure and the substituents on the geometries and electronic properties of these materials are discussed to investigate the relationship between molecular structure and optoelectronic properties. This investigation was used to drive further syntheses towards compounds more useful as active optoelectronic materials. Theoretical knowledge of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the components is basic in studying organic solar cells, so the HOMO, LUMO, and gap energy V _oc (open-circuit voltage) of the studied compounds are calculated and discussed. These properties suggest these materials as good candidates for use in organic dye-sensitized solar cells.     

Conductometric study of complex formation between benzylbisthiosemicarbazone and metal cations in acetonitrile,dimethylformamide, and their binary mixtures

We report on conductometric study of complexation between benzylbisthiosemicarbazone [(2E,2′E)-2,2′-(1,2-diphenylethane-1,2-diylidene)bis(hydrazine-1-carbothioamide)] with Zn²⁺, Cr³⁺, Co²⁺, and Ni²⁺ cations at different temperatures in acetonitrile-dimethylformamide binary solvents of varied composition. The equilibrium constant and standard thermodynamic parameters (Δ_c H ⁰ and Δ_c S ⁰) of the complexes formation have been determined and found to be dependent on the binary solvent composition, the metal ion nature, and temperature.     

A Rapid and Sensitive LC–MS Method for Determination of Ezetimibe Concentration in Human Plasma: Application to a Bioequivalence Study

A selective and highly sensitive high performance liquid chromatography-electrospray ionization mass spectrometry method has been developed for determination of ezetimibe concentrations in human plasma. Ezetimibe was extracted from plasma with ethyl acetate followed by evaporation of the organic layer and, then, reconstitution of the residue in mobile phase before injection to chromatograph. The mobile phase consisted of acetonitrile-ammonium acetate (10 mM, pH 3.0), 75:25 (v/v). An aliquot of 10 μL was chromatographically analyzed on a prepacked Zorbax XDB-ODS C₁₈ column (2.1 × 100 mm, 3.5 micron). Detection of analytes was achieved by mass spectrometry with atmospheric pressure chemical ionization (APCI) interface in the negative ion mode operated under the multiple-reaction monitoring mode (m/z transition: ezetimibe 408–271). Standard curves were linear (r = 0.998) over the wide ezetimibe concentration range of 0.05–30.0 ng mL⁻¹ with acceptable accuracy and precision. The limit of detection was 0.02 ng mL⁻¹. The validated LC–APCI–MS method has been used successfully throughout a bioequivalence study on an ezetimibe generic product in 24 healthy male volunteers.

     

The effect of target rotation rate on structural and morphological properties of thin garnet films fabricated by pulsed laser deposition

The effect of target rotation rate on the structural and morphological properties of pulsed laser deposition grown Bi:YIG garnets is investigated. The rotation rate dependence of the surface morphology and magnetic properties of the thin films were studied using atomic force microscopy combined with a magneto-optical measurement setup. The results show that decrease in the target rotation rate can also increase the roughness, the index of refraction, and the surface skewness and can decrease Faraday rotation by an order of magnitude.     

Solubility prediction of deferiprone in N-methyl-2-pyrrolidone + ethanol mixtures at various temperatures using a minimum number of experimental data

Experimental solubility of deferiprone (DFP) in N-methyl-2-pyrrolidone (NMP) + ethanol (EtOH) mixtures at 293.2, 298.2, 303.2 and 308.2 K was determined and mathematically represented using various models. The trained versions of the van’t Hoff equation, its combined version with log-linear model, Jouyban–Acree model and a combination of van’t Hoff + Jouyban–Acree model were reported to simulate DFP solubility in the binary mixture compositions at various temperatures. The mean percentage deviation (MPD) was used as an accuracy criterion. The obtained overall MPDs for back-calculated and predicted solubility of DFP in NMP + EtOH mixtures varied from 1.1% to 3.2% and 2.6% to 6.6%, respectively. Some of apparent thermodynamic quantities for the dissolution processes of DFP are also reported.