Study of the peak effect phenomenon in single crystals of 2H-NbSe2

The weakly pinned single crystals of the hexagonal 2H-NbSe₂ compound have emerged as prototypes for determining and characterizing the phase boundaries of the possible order-disorder transformations in the vortex matter. We present here a status report based on the ac and dc magnetization measurements of the peak effect phenomenon in three crystals of 2H-NbSe₂, in which the critical current densities vary over two orders of magnitude. We sketch the generic vortex phase diagram of a weakly pinned superconductor, which also utilizes theoretical proposals. We also establish the connection between the metastability effects and pinning.     

Novel nonperipheral octa-3-hydroxypropylthio substituted metallo-phthalocyanines: synthesis,characterization, and investigation of their electrochemical,photochemical and computational properties

The current study describes the synthesis, electrochemical, computational, and photochemical properties of octa (3-hydroxypropylthio) substituted cobalt (II) ( 4 ), copper (II) ( 5 ), nickel (II) ( 6 ) and zinc(II) ( 7 ) phthalocyanine derivatives. These novel compounds were characterized by elemental analysis,¹H,¹³C NMR, FT-IR, UV-Vis, and MS. The redox behaviors of these metallo-phthalocyanines were investigated by the cyclic voltammetric method. The optimized molecular structure and gauge-including atomic orbital (GIAO)¹H and¹³C NMR chemical shift values of these phthalocyanines in the ground state had been calculated by using B3LYP/6–31G(d,p) basis set. The outcomes of the optimized molecular structure were given and compared with the experimental NMR values. The photochemical properties including photodegradation and singlet oxygen generation of zinc(II) phthalocyanine were studied in DMSO solution for the determination of its photosensitizer behaviors.     

Peculiar reaction behavior of 1,3-oxathiolan-5-one toward various reagents: Molecular modeling studies and in vitro antioxidant and cytotoxicity evaluation

Chemical reactivity of 2-methyl-2-phenyl-1,3-oxathiolan-5-one (1) toward various reagents such as hydroxyaldehyde, ketone, α,β unsaturated carbonyl compounds, heterocyclic amine, hydrazine, and hydrazide to give unpredicative opened and fused heterocyclic systems was investigated. Moreover, treatment of compound 1 with bromoester to afford the respective fused system, 2-methyl-2-phenylfuro[3,2-d][1,3]oxathiol-5(6H)-one (6) was implemented. Besides, ¹H–¹H nuclear overhauser effect spectroscopy was used for full confirmation of the compound 19. In addition, the density functional theory modeling study outcomes were discussed and all of the new synthesized compounds were evaluated as antioxidants and cytotoxicity assay against hepatocellular carcinoma cell line.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Simultaneous determination of rofecoxib and celecoxib in human plasma by high-performance liquid chromatography

An innovative reversed-phase high-performance liquid chromatographic method is validated for the simultaneous determination of rofecoxib and celecoxib in human plasma. The internal standard is 4-n-pentyl-phenyl-acetic acid. Good chromatographic separation is achieved using a Zorbax SB-CN (5 microm) analytical column operated at room temperature and mobile phase consisting of acetonitrile and water containing 0.1M potassium dihydrogen orthophosphate buffer adjusted to pH 2.4 with 85% orthophosphoric acid (42:58, v/v). UV detection is performed at 254 nm, and the flow rate is maintained at 1.0 mL/min. Plasma samples are extracted into an organic solvent (1-chlorobutane) and evaporated under an air flow. The calibration curve for rofecoxib is linear over the range of 10 to 500 microg/L, and the celecoxib calibration curve is linear over the range of 20 to 2000 microg/L. The lower limit of quantitation for rofecoxib and celecoxib is 10 and 20 microg/L, respectively, using 1.0 mL of human plasma. The validation data show that the assay is sensitive, accurate, specific, and reproducible for the determination of rofecoxib and celecoxib. This method is therefore appropriate for pharmacokinetic studies to quantitate these therapeutic agents in patients with arthritis conditions.     

Feasible Approach to Tricyclic and Tetracyclic cyclododecanone

2‐Bromocyclododecanone was utilized as precursor to synthesize polyfused heterocyclic cyclododecane ring systems. Transformation of 2‐bromocyclododecanone ( 5 ) with 1H‐benzimidazole‐2‐thiole ( 6 ), benzo[d]thiazole‐2‐thiol ( 9 ), 2‐naphthol ( 12 ), and thiophenol ( 15 ) afforded thiazolo[2,3‐b]benzimidazole ( 8 ), thiazolo[2,3‐b]benzothaizole derivative ( 11 ) naphtho[1,2‐d]furan derivative ( 14 ) and 2‐(phenylthio)cyclododecanone ( 16 ), respectively.     

Multiple ionization of argon in coincidence with projectile ions in 60–120 MeV Si q+-Ar collisions

A projectile ion-recoil ion coincidence technique has been employed to study the multiple ionization and the charge transfer processes in collisions of 60–120 MeV Si ^q+ (q = 4−14) ions with neutral argon atoms. The relative contribution of different ionization channels, namely; direct ionization, electron capture and electron loss leading to the production of slow moving multiply charged argon recoil ions have been investigated. The data reported on the present collision system result from a direct measurement in the considered impact energy for the first time. The total ionization cross-sections for the recoil ions are shown to scale as q ^1.7/E _p ^0.5 , where E _p is the energy in MeV of the projectile and q its charge state. The recoil fractions for the cases of total- and direct ionizations are found to decrease with increasing recoil charge state j. The total ionization fractions of the recoils are seen to depend on q and to show the presence of a ‘shell-effect’ of the target. Further, the fractions are found to vary as 1/j ² upto j = 8+. The average recoil charge state 〈j〉 increases slowly with q and with the number of lost or captured electrons from or into the projectile respectively. The projectile charge changing cross-sections σ _qq′ are found to decrease with increasing q for loss ionization and to increase with q for direct-and capture ionization processes respectively. The physics behind various scaling rules that are found to follow our data for different ionization processes is reviewed and discussed.     

Transfer measurements for the Ti+Ni systems at near barrier energies

Large enhancements have been observed in the sub-barrier fusion cross sections for Ti+Ni systems in our previous studies. Coupled channel calculations incorporating couplings to 2⁺ and 3⁻ states failed to explain these enhancements completely. A possibilty of transfer channels contributing to the residual enhancements had been suggested. In order to investigate the role of relevant transfer channels, measurements of one- and two-nucleon transfer were carried out for ^46,48Ti+⁶¹Ni systems. The present paper gives the results of these studies.     

Fabrication and characterization of enhanced hydrazine electrochemical sensor based on gold nanoparticles decorated on the vanadium oxide,ruthenium oxide nanomaterials,and carbon nanotubes composites

This work describes the synthesis of mixed oxide film of vanadium and ruthenium by pulsed deposition technique on multiwall carbon nanotubes and the decoration of gold nanoparticles on the mixed film. A ternary electrocatalyst has been developed for the electrochemical oxidation of hydrazine by combining two metal oxide mixtures with Au nanoparticles. Surface morphology and chemical composition of the electrode have been examined with SEM, EDX, HRTEM, EIS, and XRD. The peak current of hydrazine increased 9 times at the AuNPs/(VOx-RuOx)/CNT/GCE compared to the bare GCE, and the peak potential shifted to negative 848 mV. Linear sweep voltammetry (LSV) and amperometric techniques revealed that the AuNPs/(VOx-RuOx)/CNT/GCE displays linear concentration range 2.5–10000 µM (LSV) and the concentration range 0.03–100 µM (amperometry). The limit of detection (LOD) is 0.5 μM and 0.1 μM at (S/N = 3) for LSV and amperometric technique, respectively. The results obtained show a good RSD% of 2.1%–3.2% and reasonable recovery of 97%–108% of hydrazine detection.