Composite Silica Particles Using a Mixture of Organosilane Monomers

Composite silica particles were synthesized by a two-step (acid-base) process in an aqueous solution with a mixture of organoalkoxysilane monomers. The two-step process separates the hydrolysis and condensation procedures to easily control condensation rate. In this study, the silane monomers used were phenyltrimethoxysilane (PTMS), vinyltrimethoxysilane (VTMS), methyltrimethoxysilane (MTMS), and tetraethyl-orthosilicate (TEOS). The physical properties of the resultant composite particles were investigated with the change in the molar ratio of monomers. The size of the particles increased with increasing the molar ratio of R_aSi(OR)₃/R_bSi(OR)₃ or R_aSi(OR)₃/TEOS (R_a: phenyl; R_b: vinyl, methyl).     

Study of the peak effect phenomenon in single crystals of 2H-NbSe2

The weakly pinned single crystals of the hexagonal 2H-NbSe₂ compound have emerged as prototypes for determining and characterizing the phase boundaries of the possible order-disorder transformations in the vortex matter. We present here a status report based on the ac and dc magnetization measurements of the peak effect phenomenon in three crystals of 2H-NbSe₂, in which the critical current densities vary over two orders of magnitude. We sketch the generic vortex phase diagram of a weakly pinned superconductor, which also utilizes theoretical proposals. We also establish the connection between the metastability effects and pinning.     

Preparation of Silver Nanoparticles through Alcohol Reduction with Organoalkoxysilanes

Silver nanoparticles of narrow size distribution were prepared through the chemical reduction in an alcohol solution with several organoalkoxysilanes. In this system, organoalkoxysilanes served as a stabilizer, protecting silver nanoparticles from aggregation. The changes in size and morphology of colloidal silver nanoparticles were investigated with the addition of organoalkoxysilanes such as 3-aminopropyltriethoxysilane (APS), methyltriethoxysilane (MTS), phenyltrimethoxysilane (PTS), vinyltriethoxysilane (VTS), and 3-glycidoxypropyltrimethoxysilane (GPS) as stabilizers. The organic functional groups of organoalkoxysilanes interact with silver ions and clusters, which stabilize silver nanoparticles in the system. The silver nanoparticles obtained were characterized with transmission electron microscopy (TEM), UV-vis spectroscopy, etc.     

一维光子晶体缺陷模激光器的放大特性

光子晶体中引入缺陷后将形成缺陷模,这些缺陷模在增益介质中将被放大形成激光。基于麦克斯韦方程和速率方程相结合的模型,用时域有限差分法(FDTD)计算和分析了一维单缺陷光子晶体激光器中缺陷模的空间分布和频谱特性,以及这些缺陷模的放大特性,主要研究了缺陷层的厚度、晶体层数对缺陷模放大特性的影响。模拟结果显示,类似于传统激光腔的腔模,这些缺陷模能够被放大,形成激光。调整缺陷层的厚度、晶体层数等结构参量,将改变缺陷模的谐振,激射频率以及空间分布,这将直接影响激射阈值和饱和特性。增加晶体的层数,激光器的阈值将降低,饱和值将增加,但晶体层数增加到一定限度时,这种增减趋势变弱。模拟结果证明了有效层数的存在。     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

The influence of a transverse magnetic field on a subnormal glow discharge in air

In subnormal glow discharge under d.c. excitation at different pressure in a varying transverse magnetic field (0 to 30 G) some measurements have been carried out for various initial average tube currents. The voltage across the discharge increases and average tube current and residual current decreases in the magnetic field. With the help of Beckman’s expression [4] for the axial field and the electron density distribution in a transverse magnetic field the observed variation of current and voltage can be satisfactorily explained. The variation of axial electric field with transverse magnetic field can be represented to a fair degree of accuracy by the derived equation. The behaviour of residual current with magnetic field has been observed in these oscillations.     

Integral equation formulation for buoyancy-driven convection problems

An integral equation formulation for buoyancy-driven convection problems is developed and illustrated. Buoyancy-driven convection in a bounded cylindrical geometry with a free surface is studied for a range of aspect ratios and Nusselt numbers. The critical Rayleigh number, the nature of the cellular motion, and the heat transfer enhancement are computed using linear theory. Green's functions are used to convert the linear problem into linear Fredholm integral equations. Theorems are proved which establish the properties of the eigenvalues and eigenfunctions of the linear integral operator which appears in these equations.     

QM/MM based 3D QSAR models for potent B-Raf inhibitors

Three dimensional (3D) quantitative structure-activity relationship studies of 37 B-Raf inhibitors, pyrazole-based derivatives, were performed. Based on the co-crystallized compound (PDB ID: 3D4Q), several alignment methods were utilized to derive reliable comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) models. Receptor-guided alignment with quantum mechanics/molecular mechanics (QM/MM) minimization led to the best CoMFA model (q ² = 0.624, r ² = 0.959). With the same alignment, a statistically reliable CoMSIA model with steric, H-bond acceptor, and hydrophobic fields was also derived (q ² = 0.590, r ² = 0.922). Both models were validated with an external test set, which gave satisfactory predictive r ² values of 0.926 and 0.878, respectively. Contour maps from CoMFA and CoMSIA models revealed important structural features responsible for increasing biological activity within the active site and explained the correlation between biological activity and receptor-ligand interactions. New fragments were identified as building blocks which can replace R1-3 groups through combinatorial screening methods. By combining these fragments a compound with a high bioactivity level prediction was found. These results can offer useful information for the design of new B-Raf inhibitors.     

Rough isometry and Dirichlet finite harmonic functions on Riemannian manifolds

We prove that the dimension of harmonic functions with finite Dirichlet integral is invariant under rough isometries between Riemannian manifolds satisfying the local conditions, expounded below. This result directly generalizes those of Kanai, of Grigor'yan, and of Holopainen. We also prove that the dimension of harmonic functions with finite Dirichlet integral is preserved under rough isometries between a Riemannian manifold satisfying the same local conditions and a graph of bounded degree; and between graphs of bounded degree. These results generalize those of Holopainen and Soardi, and of Soardi, respectively. Received: 23 July 1998 / Revised version: 10 February 1999     

De Novo Design and Synthesis of a γ‐Turn Peptidomimetic Scaffold and Its Application as JNK3 Allosteric Ligand

As a way to develop a neuroprotective agent for the JNK3‐JIP1‐binding site, peptidomimetics of JIP‐1 as JNK3 allosteric regulators have been examined. The study consisted of in silico scaffold hopping, molecular docking, solution and solid‐phase peptide syntheses, and K_d measurements using surface plasmon resonance. As a peptidomimetic of JIP1, heptamer mimetic 16 (K_d=2.72 μm ) displayed a higher affinity than decamer JIP1 (K_d=23.6 μm ). The high affinity of 16 implies that the characteristic γ‐turn mimetic structure, “”Φ‐X‐Φ“ hydrophobic motif in 16 , increased its affinity toward the JIP‐site of JNK3.