Chromatographic competitive binding immunoassays: a comparison of the sequential and simultaneous injection methods

Two approaches for performing competitive binding immunoassays by HPLC and other flow-based systems are the simultaneous and sequential injection methods. Both these techniques make use of a column with a limited amount of antibody, onto which is injected a sample and a fixed amount of a labeled analyte analog. An indirect measure of the unlabeled analyte in the sample is then obtained by looking at the amount of analog in either the nonretained or retained peaks. In the simultaneous injection mode, the sample and labeled analog are applied at the same time to the column, while in the sequential mode the sample is injected first, followed by the analog. This results in a difference in the analytical characteristics of these two approaches. This study used chromatographic theory and previous data obtained for injections of human serum albumin (HSA) onto an anti-HSA antibody column to compare the response, detection limits, range, and sensitivity of these methods. Under equivalent conditions, it was found that the sequential method always provided the best lower limit of detection and sensitivity. However, the simultaneous mode had a broader dynamic range and higher upper limit of detection. From these observations, several guidelines were developed regarding the use and selection of such assays for new applications.     

Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection

Various practical and theoretical considerations were examined in the creation and optimization of a high-performance liquid chromatography (HPLC)-based one-site immunometric assay. This method used an HPLC analyte analog column and post-column chemiluminescence detection. The specific analyte chosen as the model for this study was l-thyroxine (also known as T₄). In this technique, a sample containing thyroxine was first combined with an excess of anti-T₄ antibody Fab fragments that had earlier been conjugated with chemiluminescent acridinium ester labels. After incubation, the mixture was injected onto a column that contained immobilized T₄. The amount of thyroxine in the original sample was then determined by measuring the labeled Fab fragments that appeared in the non-retained fraction, or the decrease in excess Fab fragments that were bound to and later eluted from the column. Items considered in creating this assay included the preparation of acridinium ester-labeled Fab fragments, the detection of these fragments with a post-column reactor, and the creation of a suitable immobilized analog column for capturing excess labeled Fab fragments. The final method could measure T₄ in standards at clinically-relevant concentrations and provided a response within 1.5 min of sample injection, following a 20-45 min incubation with the labeled Fab fragments. Possible applications of this method include its use in clinical chemistry and the screening of proteomic or combinatorial libraries.     

Analysis of drug interactions with serum proteins and related binding agents by affinity capillary electrophoresis: A review

Biomolecules such as serum proteins can interact with drugs in the body and influence their pharmaceutical effects. Specific and precise methods that analyze these interactions are critical for drug development or monitoring and for diagnostic purposes. Affinity capillary electrophoresis (ACE) is one technique that can be used to examine the binding between drugs and serum proteins, or other agents found in serum or blood. This article will review the basic principles of ACE, along with related affinity-based capillary electrophoresis (CE) methods, and examine recent developments that have occurred in this field as related to the characterization of drug–protein interactions. An overview will be given of the various formats that can be used in ACE and CE for such work, including the relative advantages or weaknesses of each approach. Various applications of ACE and affinity-based CE methods for the analysis of drug interactions with serum proteins and other binding agents will also be presented. Applications of ACE and related techniques that will be discussed include drug interaction studies with serum agents, chiral drug separations employing serum proteins, and the use of CE in hybrid methods to characterize drug binding with serum proteins.     

Approaches for the detection and analysis of antidrug antibodies to biopharmaceuticals: A review

Antibody-based therapeutic agents and other biopharmaceuticals are now used in the treatment of many diseases. However, when these biopharmaceuticals are administrated to patients, an immune reaction may occur that can reduce the drug's efficacy and lead to adverse side-effects. The immunogenicity of biopharmaceuticals can be evaluated by detecting and measuring antibodies that have been produced against these drugs, or antidrug antibodies. Methods for antidrug antibody detection and analysis can be important during the selection of a therapeutic approach based on such drugs and is crucial when developing and testing new biopharmaceuticals. This review examines approaches that have been used for antidrug antibody detection, measurement, and characterization. Many of these approaches are based on immunoassays and antigen binding tests, including homogeneous mobility shift assays. Other techniques that have been used for the analysis of antidrug antibodies are capillary electrophoresis, reporter gene assays, surface plasmon resonance spectroscopy, and liquid chromatography-mass spectrometry. The general principles of each approach will be discussed, along with their recent applications with regards to antidrug antibody analysis.     

Novel Foaming-Agent Free Insulating Geopolymer Based on Industrial Fly Ash and Rice Husk

This study highlights the synthesis of a new thermal insulating geopolymer based on the alkaline activation of fly ashes. A porous geopolymer material can be prepared without the addition of a foaming agent, using high ratio solution/ashes (activating solutions used are water, sodium or potassium hydroxide). In order to increase the porosity of the material and to make it more ecological, rice husks are incorporated into the formulation. The geopolymer materials were prepared at room temperature and dried at moderate temperature (105 °C) by a simple procedure. The microstructural characteristics of these new porous geopolymers were assessed by optical microscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and X-ray fluorescence (XRF). Infrared spectroscopy (FTIR) was used to confirm the geopolymerisation. The effect of the ratio solution/ashes and the percentage of the rice husk addition on thermal and mechanical analysis was evaluated. An insulating material for a solution/ashes ratio of 0.9 and a rice husk content of 15% having a λ value of 0.087 W/(m·K), a porosity of 61.4% and an Rc value of 0.1 MPa was successfully prepared.     

Competing spin phases in geometrically frustrated magnetic molecules

We identify a class of zero-dimensional classical and quantum Heisenberg spin systems exhibiting anomalous behavior in an external magnetic field B similar to that found for the geometrically frustrated kagome lattice of classical spins. Our calculations for the isotropic Heisenberg model show the emergence of a pronounced minimum in the differential susceptibility dM/dB at B(sat)/3 as the temperature T is raised from 0 K for structures based on corner-sharing triangles, specifically the octahedron, cuboctahedron, and icosidodecahedron. As the first experimental evidence we note that the giant Keplerate magnetic molecule {Mo(72)Fe(30)} (Fe(3+) ions on the 30 vertices of an icosidodecahedron) exhibits this behavior. For low T when B approximately B(sat)/3 two competing families of spin configurations exist of which one behaves magnetically "stiff" leading to a reduction of dM/dB.     

Effects of process severity on the chemical structure of Miscanthus ethanol organosolv lignin

Ethanol organosolv lignin extracted from Miscanthus × giganteus with differing levels of severity (1.75 < CS<2.8) were subjected to comprehensive structural characterization by ¹³C, ³¹P NMR, FTIR spectroscopy and gel permeation chromatography. The results were compared to those from milled wood lignin from the same feedstock. The results showed that an increase in the severity of the treatment enhanced the dehydration reactions on the side chain and the condensation of lignin, increased the concentration of phenol groups and decreased the molecular mass of lignin fragments. It appeared that for the experimental conditions generally employed the cleavage of α-aryl ether bonds is primarily reaction responsible for lignin depolymerization under the organosolv conditions examined.     

Efficient implementation of the Lanczos method for magnetic systems

Numerically exact investigations of interacting spin systems provide a major tool for an understanding of their magnetic properties. For medium size systems the approximate Lanczos diagonalization is the most common method. In this article we suggest two improvements: efficient basis coding in subspaces and simple restructuring for openMP parallelization.     

Experimental unconditional preparation and detection of a continuous bound entangled state of light

Among the possibly most intriguing aspects of quantum entanglement is that it comes in free and bound instances. The existence of bound entangled states certifies an intrinsic irreversibility of entanglement in nature and suggests a connection with thermodynamics. In this Letter, we present a first unconditional, continuous-variable preparation and detection of a bound entangled state of light. We use convex optimization to identify regimes rendering its bound character well certifiable, and continuously produce a distributed bound entangled state with an extraordinary and unprecedented significance of more than 10 standard deviations away from both separability and distillability. Our results show that the approach chosen allows for the efficient and precise preparation of multimode entangled states of light with various applications in quantum information, quantum state engineering, and high precision metrology.