An alternative method for the certification of the sulfur mass fraction in coal Standard Reference Materials

The S mass fractions of coal SRMs 2682b, 2684b, and 2685b are certified by direct comparison with coal SRMs 2682a, 2684a, and 2685a, respectively, using high-temperature combustion analysis with infrared (IR) absorption detection. The S mass fractions of the "a" materials used for calibration were previously determined by means of isotope-dilution thermal-ionization mass spectrometry (ID-TIMS). Therefore, the comparisons performed with the combustion-IR absorption method establish direct traceability links to accurate and precise ID-TIMS measurements. The expanded uncertainties associated with the certified S mass fractions are of approximately the same magnitude as would be expected for the ID-TIMS methodology. An important aspect of these certifications is that each "b" material is essentially identical with the corresponding "a" material, because both were produced from the same bulk, homogenized coal. As a test of the efficacy of the new certification approach when calibrant and unknown are not identical, the S mass fraction of coal SRM 2683b has been determined by direct comparison to coal SRM 2683a. These two coals, which have both previously been analyzed with ID-TIMS, are different in terms of S content and other properties. Whereas the S mass fraction for SRM 2683b determined with the new methodology agrees statistically with the ID-TIMS value, there is reason for caution in such cases. In addition to the usefulness of the alternative approach for certification activities within NIST, this approach might also be an excellent way of establishing NIST traceability during the value assignment process for reference materials not issued by NIST. Further research is needed, however, to understand better the scope of applicability.     

Kinetic studies of nickel speciation in model solutions of a well-characterized humic acid using the competing ligand exchange method

Publications on the binding characteristics of metals with humic acid (HA) are sparse. Here we investigated the release of nickel from Ni(II)-HA complexes using model solutions of three different [Ni(II)]/[HA] mole ratios at three different pH values; we also compared the results with those of [Ni(II)]/[FA] complexes from previous work in this laboratory. Ligand exchange kinetics using the competing ligand exchange method (CLEM) were studied using two different techniques: graphite furnace atomic absorption spectrometry (GFAAS) with Chelex 100 resin as the competing ligand, and adsorptive cathodic stripping voltammetry (AdCSV) with dimethylglyoxime as the competing ligand to measure the rate of dissociation of Ni(II)-HA complexes. The results of the kinetic studies showed that as the [Ni(II)]/[HA] mole ratio was decreased, the rate of dissociation of Ni(II)-HA complexes decreased, and the proportion of free Ni²⁺ ions plus very labile nickel complexes decreased while the proportion of the less labile kinetically distinguishable components increased. Generally, the rate of dissociation of Ni(II)-HA complexes was slower than that of Ni(II)-FA complexes. Studies on the validity of the kinetic model showed that the concentrations of chemical species varied in a reasonable way with pH and the [Ni(II)]/[HA] mole ratios, indicating that the kinetically distinguishable components have chemical significance and the kinetic model is valid.     

The effect of organic nitriles on the radiation induced polymerization of styrene

The effect of a range of 10 organic nitriles on the radiation-induced polymerization of styrene was studied. A dose rate of 4.4 rad s^?1 was used. A rate of polymerization of styrene (1.744 mol L^?1 of toluene solution) of 5.0 × 10^?7 mol L^?1 s^?1 was found. With organic nitriles present (styrene:nitrile ratio of 1:0.28) the rate of polymerization increased. Rates in the range of 5.5 × 10^?7 ?5.2 × 10^?6 mol L^?1 s^?1, depending on the nitrile present, were obtained. The polymers were partially characterized and evidence of involvement of each of the nitriles in the polymer chains was revealed. The increase in rate of polymerization has been attributed to the part played by nitrile radicals in the initiation of styrene polymerization. Radical yield values [as G(nitrile radical)] were derived from the relevant rate expressions. Values ranged from 2.7 to 49.5, depending on the particular nitrile. Corresponding values of G(nitrile radical) in the range of 5.1–129.4 were obtained by the manipulation of number-average molar mass data. Values of k_pk_t of approximately 2 × 10^?5 L mol^?1 s^?1 were found. Trommsdorff types of effect are absent from these systems.     

Elution order in gas chromatography

The retention behavior of a heterogeneous group of solutes has been examined on seven different stationary phases under isothermal and temperature-programmed conditions. Both ΔH_v (enthalpy of solute vaporization from the stationary phase) and ΔS_v (entropy of solute vaporization from the stationary phase) values were determined for each solute – stationary phase combination under isothermal conditions. Both program rate and carrier gas velocity were shown to affect solute elution order. Unless these and other experimental factors discussed are controlled, column equivalency studies based on solute elution order have dubious value.     

Complexation of Ni, Cu, Zn, and Cd by DOC in some metal-impacted freshwater lakes: a comparison of approaches using electrochemical determination of free-metal-ion and labile complexes and a computer speciation model, WHAM V and VI

Complexation of Ni(II), Cu(II), Zn(II), and Cd(II) by dissolved organic carbon (DOC) in some freshwater lakes in Rouyn-Noranda, Québec, Canada, where they were impacted by effluents from a nearby copper smelter, was measured by kinetic and equilibrium methods using cathodic and anodic stripping voltammetry. The measured free-metal-ion and labile metal-complex concentrations were compared with the predictions made by a widely-used computer speciation model, the Windermere Humic Aqueous Model (WHAM): WHAM V and its improved version WHAM VI. If it is assumed that 65% of the DOC is “active”, i.e. behaving as isolated humic substances such as fulvic acid, both versions of WHAM are able to predict the labile and free-metal-ion concentrations of Ni, Zn, and Cd reasonably well; however, both underestimate the free-copper-ion concentration by one to two orders of magnitude. WHAM VI is generally better than or equal to WHAM V for successfully predicting most of the free-metal-ion concentrations. The modelled competition by Al(III) and Fe(III) in the lake surface waters showed that in most cases Cu(II) was most affected by this competition. WHAM VI predicts a larger effect from the Al(III) and Fe(III) competition than does WHAM V.     

Characterisation of the surface Lewis acid-base properties of poly(butylene terephthalate) by inverse gas chromatography

Two modes of high-speed counter-current chromatography (HSCCC) were applied to separate 3- and 4-sulfophthalic acid from a mixture. Conventional HSCCC was useful for the separation of up to several hundred milligram quantities of these positional isomers, while pH-zone-refining CCC was implemented successfully to separations at the multigram level. The conventional HSCCC separations were performed with a standard J-type HSCCC system that has a superior resolution but a lower level of retention of the stationary phase of the biphasic solvent system used (acidified n-butanol-water). The pH-zone-refining CCC separations were performed with an X-type HSCCC system (a cross-axis system) that has a higher capability for retention of the stationary phase. The purified positional isomers (over 99% pure as determined by HPLC) were characterized by 1H NMR and negative ion electrospray ionization mass spectrometry.     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.     

Synthesis of 2-substituted benzofurans and indoles using functionalized titanium benzylidene reagents on solid phase

Titanium(IV) benzylidenes bearing a masked oxygen or nitrogen nucleophile in the ortho position were generated from thioacetals, using low-valent titanocene complex, Cp2Ti[P(OEt)3]2. Methylene acetal, alkyl ether, silyl ether, fluoro, tertiary amino, and N-alkyl, N-benzyl, N-prenyl, and N-silyl tert-butyl carbamate groups were tolerated in the titanium alkylidene reagents (Schrock carbenes). Aryl-chlorine bonds were stable to the titanium benzylidene functionality, but there was poor chemoselectivity for the reduction of the thioacetal in the presence of an aryl chloride. The titanium benzylidenes converted Merrifield and Wang resin-bound esters into enol ethers. The oxygen nucleophile was masked as a TMS ether, and when the resin-bound enol ethers bearing this ortho substituent were treated with 1% TFA in dichloromethane, benzofurans were released from resin in high yields. The chameleon catch strategy ensured excellent purity. In a similar way, N-alkylated and N-silylated tert-butyl carbamates were used for the synthesis of N-alkyl and N-Boc indoles, respectively. These traceless solid-phase syntheses of heterocycles are believed to involve postcleavage modification rather than cyclative termination.