A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Highly Selective Copper‐Catalyzed Asymmetric [3+2] Cycloaddition of Azomethine Ylides with Acyclic 1,3‐Dienes

The first examples of the catalytic asymmetric 1,3‐dipolar cycloaddition of azomethine ylides with acyclic activated 1,3‐dienes (and 1,3‐enynes) are described. Under copper catalysis, a selective cycloaddition at the terminal γ,δ‐C?C bond is observed. In addition, depending on the ligand used, either the exo or the endo adduct can be obtained with high selectivity. Under appropriate reaction conditions, the acyclic 1,6‐addition product is detected, suggesting a stepwise mechanism. The resulting C4‐alkenyl‐substituted pyrrolidines are suitable substrates for further access to polycyclic systems, as highlighted by the preparation of hexahydrochromeno[4,3‐b]pyrrole and the tetracyclic core of the alkaloid gracilamine.     

Herstellung von substituierten 2-Aminooxazol-4-carbonitrilen

Preparation of Substituted 2-Aminooxazole-4-carbonitriles During our synthetic programme to convert 4-isoxazolylthioureas 3 into the corresponding carbodiimides 5 , a side reaction leading to the hitherto unknown 2-aminooxazole-4-carbonitriles 6 was observed. By selecting appropriate reaction conditions, it was possible to improve the yields of the carbodiimides 5 as well as of the novel oxazole-carbonitriles 6 at will, thus allowing the synthesis of 6 to be conducted in very good yields. To overcome the difficulty of isolating unstable carbodiimides, the synthesis of 6 is best carried out in a one-pot procedure. A limited mechanistic study showed that the formation of 6 proceeds via 5 as the only intermediate. The stability of the N?C?N bonds against base attack (depending strongly on both sterical hindrance and electronic-density factors) forms the only limitation of this new synthetic pathway to oxazole-4-carbonitriles.     

Linearized Stability of Charged Thin-Shell Wormholes

The linearized stability of charged thin shell wormholes under spherically symmetric perturbations is analyzed. It is shown that the presence of a large value of charge provides stabilization to the system, in the sense that the constraints onto the equation of state are less severe than for non-charged wormholes.     

Kinetics of the thermal decomposition of bis(trifluoromethyl) peroxydicarbonate,CF3OC(O)OOC(O)OCF3

Thermal decomposition of bis(trifluoromethyl) peroxydicarbonate has been studied. The mechanism of decomposition is a simple bond fission, homogeneous first‐order process when the reaction is carried out in the presence of inert gases such as N₂ or CO. An activation energy of 28.5 kcal mol^?1 was determined for the temperature range of 50–90°C. Decomposition is accelerated by nitric oxide because of a chemical attack on the peroxide forming substances different from those formed with N₂ or CO. An interpretation on the influence of the substituents in different peroxides on the O? O bond is given. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 15–19, 2003     

Use of the Apparent Content Curves for the spectrophotometric identification of substances: identification of amphetamines

The possibility of identification of substances which have similar spectral behaviour by means of Apparent Content Curves has been studied. This study is carried out with absorption, excitation and emission spectra of several amphetamines of widespread pharmaceutical use. Results obtained show that amphetamine, phenylpropanolamine, pseudoephedrine, phenylephrine, epinephrine, dopamine and methoxyamphetamine can be identified with a probability of >95%.     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Reaction of SbPO4 with lithium in non-aqueous electrochemical cells: preliminary study and evaluation of its electrochemical performance in anodes for lithium ion batteries

SbPO₄, a phosphate with a layered structure, was tested as an electrode material for lithium cells spanning the 3.0-0.0 V range. Two main electrochemical processes were detected as extensive plateaus at ca. 1.6 and 0.7 V in galvanostatic measurements. The first process was found to be irreversible, thus excluding a potential intercalation-like mechanism for the reaction and being better interpreted as a decomposition reaction leading to the formation of elemental Sb. This precludes the use of this compound as a cathodic material for lithium cells. By contrast, the process at 0.7 V is reversible and can be ascribed to the formation of lithium-antimony alloys. The best electrochemical response was obtained by cycling the cell at a C/20 discharge rate over the voltage range 1.25-0.25 V. Under these conditions, the cell delivers an average capacity of 165 Ah/kg—a value greater than those reported for other phosphates—upon successive cycling.     

An unusual syn conformation of 5‐formyluracil stabilized by supramolecular interactions

The asymmetric unit of the amino–oxo tautomer of 5‐formyluracil (systematic name: 2,4‐dioxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carbaldehyde), C₅H₄N₂O₃, comprises one planar amino–oxo tautomer, as every atom in the structure lies on a crystallographic mirror plane. At variance with all the previously reported small‐molecule crystal structures containing the 5‐formyluracil residue, the formyl substituent in the title compound exhibits an unusual syn conformation. The molecules are linked into planar sheets parallel to the bc plane by a combination of six N—H...O and C—H...O hydrogen bonds. Four of the hydrogen bonds are utilized to stabilize the formyl group in the syn conformation.     

Magydardiendiol,diterpenoid with a new skeleton from magydaris panacifolia (umbelliferae).

Three new diterpenoids with a substituted α-cyclogeraniol skeleton have been isolated from the umbelliferae $\text{Magydaris panacifolia}$ (Vahl) Lange, for which the names of magydar-2,13-dien-11,17-diol, $\text{1}$, magydar-2,10 (20), 13-trien-17-ol, $\text{2}$, and magydar-2,10(20), 13-trien-17-yl acetate, $\text{3}$, are proposed. The structures of these substances have been deduced from spectroscopic and chemical data.