Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

CX_2(NO_2)_2(X=H,F,C1)分子旋转势和构型稳定性的ab initio研究

本文用ab initio计算方法,采用STO-3G基组,对二硝基卤代甲烷CH_2(NO_2)_3(1),CF_2(NO_2)_2(2);CCl_2(NO_2)_2(3)等分子作了单点计算,研究其旋转势能.全构型优化研究了五个具有对称性构型的结构和稳定性,并作了理论分析和探讨.     

Electroless deposition of open-end Cu nanotube arrays

Cu nanotube arrays were fabricated by electroless deposition using porous anodic aluminium oxide membranes as templates. This was accomplished by a four-step procedure, i.e. pore-wall modification, polishing treatment, sensitization-activation and electroless deposition. The as-synthesized Cu nanotubes possess controllable inner diameter and open ends.     

Magnetic Properties of Hf0.8Ta0.2（Fe0.97A0.03）2 （A=Al, Co, Mn） Systems

Moessbauer studies on the effect of substitution with 3% Al, Co, Mn atoms in the intermetallic compound of Hf0.8Ta0.2Fe2 are reported. The Al substitution leads to increase of the FM-AFM transition temperature and to decrease of the AFM-PM transition temperature. The Co substitution leads to disappearance of the FM state, only showing some FM impurity component, while Mn substituted compound indicates coexistence of FM and AFM states at low temperature. The phenomena imply complex itinerant electron properties in these magnetic systems.     

Synthesis,crystal structures and electrochemical properties of group 6 metal carbonyl anion complexes

A series of [M(CO)₅I]⁻ and [M₂(CO)₁₀I]⁻ anion complexes have been synthesized by the photochemical reaction of PhCH₂N(CH₃)₃I or FcCH₂N(CH₃)₃I (Fc=ferrocenyl) with M(CO)₆ (M = Cr, Mo or W), and characterized by elemental analyses, i.r., ¹H-n.m.r. and ¹³C-n.m.r. spectra in the case of the molybdenum and tungsten complexes. These complexes exhibit considerably different electrochemical behavior, when investigated by cyclic voltammetry. The crystal structures of [PhCH₂N(CH₃)₃][Cr(CO)₅I] and [FcCH₂N(CH₃)₃][W₂(CO)₁₀I] have been determined by X-ray diffraction, indicating that only weak contacts maybe exist between anions and cations by the I...H bond in the former, and there are no direct interactions between anions and cations in the latter.     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

Chelatometric titration of tin in non-ferrous alloys with hedta

A new titrimetric method for determination of tin (4%) in aluminium alloys, tin- and lead-base alloys, solders, white bearing alloys, special bronzes and silver brazing alloys is proposed. HEDTA, Semi-Xylenol Orange and bismuth perchlorate are used as titrant, indicator and back-titrant respectively. Measures are taken to overcome the hydrolysis of Sn(IV). Monochloroacetic acid and ethylene glycol are added as auxiliary agents. The standard deviation of this method was found to be 0.2 mg and its coefficient of variation to vary from 0.25 to 2%, according to amount of tin. A novel method of sample decomposition and a modified method for separating Sn(IV) are also suggested.     

Pd-Rh型国Ⅲ排放三效催化剂的研制

对满足欧Ⅲ排放限值的Pd-Rh型三效催化剂进行研究开发,测试了新鲜催化剂的空燃比特性和起燃温度特性,并与市场上的欧Ⅲ催化剂在同等条件下老化后的性能进行了比较.对研制的催化剂进行封装总成后,按照GB18352.3-2005标准进行了常温冷起动Ⅰ型和低温冷起动IV型试验,测试结果完全能满足该标准的限值要求.