排序方式: 共有47条查询结果,搜索用时 250 毫秒
1.
溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能 总被引:2,自引:1,他引:2
应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明,适量钾和钴助剂的添加能显著提高催化剂合成醇的性能,尤其是提高了C2+醇的选择性。此外,反应温度、压力以及空速对合成醇影响明显,升高温度可以提高催化反应中低碳醇的收率,但选择性下降;增加压力和空速可以提高低碳醇的收率和选择性,对合成低碳醇有利。在230 ℃,6.0 MPa,14 400 h-1条件下,催化剂合成低碳醇的收率为375.4 g/kg·h,选择性为70.2%,C1OH/C2+OH为0.48。 相似文献
2.
电致发光薄膜是平板显示器的重要材料之一,我们从研究ZnS:Mn,Cu直流电致发光薄膜的大面积稳定发光开始,首次将稀土离子引进直流电致发光薄膜,实现了各色的直流电致发光,并研究其激发机理、过热电子的能量分布、稀土离子的碰撞截面和稀土离子发光中心在晶格中的位置等。在国内首先研制成功ZnS:Mn交流电致发光薄膜计算机终端显示器,并扩大面积到640×480像素(对角线10英寸)。为了实现彩色化显示,研制出稀土离子掺杂的各色交流电致发光薄膜。研究不同稀土离子在薄膜中的浓度猝灭,以便提高薄膜的发光亮度。在致力于实现彩色的过程中,首要的任务是提高蓝色电致发光薄膜的亮度和探索新的蓝色电致发光薄膜材料:从ZnS:TmF3到CaS:TmF3,发光亮度有了很大的提高;使SrS:Ce薄膜蓝色电致发光的亮度超过1000cd/m2;同时探索纳米Si和非晶Si/SiO2超晶格结构的蓝色电致发光。成功地实现了ZnS:Mn/SrS:Ce白色电致发光和SrS:HoF3三基色线谱发射的白色电致发光,发光亮度也超过1000cd/m2。 相似文献
3.
4.
5.
建立了一种快速、灵敏且高精度的流动注射-分光光度法用于研究天然产物对酪氨酸酶活性的影响。此方法基于一定介质条件下L-3,4-二羟基苯丙氨酸(L-DOPA)在酪氨酸酶的作用下,发生氧化生成棕褐色多巴醌,其最大吸收峰位于475 nm处,而酪氨酸酶抑制剂能降低酶促反应速度,减少多巴醌形成的量,从而降低475 nm下的吸光度值,形成倒峰。在优化实验条件下,半抑制浓度的曲酸抑制酪氨酸酶活性测定相对标准偏差(n=10)为0.036%,与分光光度法和酶标仪微量法相比,精密度提高了10倍以上。咖啡酸对酪氨酸酶有较强的激活作用,对二酚酶相对激活率达到50%时的浓度(IC50)为0.170 mmol/L;薰衣草花水相提取物具有较强的抑制活性,其IC50值为0.96 mg/m L。与分光光度法及酶标仪微量法相比,流动注射-分光光度法精密度高,重复性好,适用于天然产物对酪氨酸酶活性影响的测定。 相似文献
6.
研究了对偶超导模型的大n涡旋。 基于变分原理得出了Abelian Higgs模型在n=90—110的近似涡旋解析解, 并计算了涡旋张力对n的依赖性。 发现, 每根涡旋的张力大致随n线性增长。 期望该解对理解Abelian Higgs模型中的大量子数涡旋的墙行为具有一定价值。 The large n vortices in the dual superconductor model was investigated. An approximate analytical solution was obtained for n fold quantized vortices with n=90—110 by variationally solving the AbelianHiggs model, and the vortex tension was calculated as a function of n. It was found that the vortex tension rises linearly as n grows. It is hoped that our solution shines light on the understanding of the wall behavior of the large n vortices in Abelian Higgs model. 相似文献
7.
8.
9.
10.
Li Chun-lin Fu Yi-lu Bian Guo-zhu Xie Ya-ning Hu Tian-dou Zhang Jing 《Kinetics and Catalysis》2004,45(5):679-683
CO2 reforming of CH4 was carried out with and without steam over a Ni/CeO2–ZrO2–Al2O3 catalyst. The catalytic performance, amount of carbon deposit and the EXAFS of the Ni K-edge of samples were measured. The results show that when the catalyst is used for CO2 reforming of CH4 without the addition of steam, the catalyst gradually deactivates, however, addition of a small amount of steam to the feed gas can significantly inhibits the deactivation, which is due to the great suppression of coke formation on the catalyst during the reaction. The EXAFS result shows that, maybe due to the penetration of more carbon atoms into the Ni lattice, the coordination number of the nearest Ni–Ni of the sample after the reaction without steam reduces more than that of samples after the reaction with a small amount of steam in the feed gas. 相似文献