Tests of quantum electrodynamics using ion traps

Experiments in ion traps on the g factors for the free and the bound electron in low-Z, hydrogen-like ions have provided the most accurate tests of quantum-electrodynamics calculations. Moreover they have been used to determine new and precise values for fundamental constants. Extensions to more stringent tests using ions of higher values of the nuclear charge Z are on the way. Also other QED tests such as Lamb shifts or hyperfine structures in H-like ions using traps will be feasible in the near future. The tests in bound systems, however, will be limited by nuclear structure effects which are difficult to calculate. Assuming the QED calculations as correct, the experimental results may be used to determine nuclear contributions and thus support nuclear models. Contribution presented at the TCP06, Vancouver Island, 2006.     

Optical biosensor for pharmaceuticals, antibiotics, hormones, endocrine disrupting chemicals and pesticides in water: Assay optimization process for estrone as example

Certain contaminants at trace concentrations in surface waters can have dramatic effects on the hormonal system of organisms in the aquatic environment. Therefore, immunoanalytical methods at a very low limit of detection (LOD) and a low limit of quantification (LOQ) are becoming more and more important for environmental analysis and especially for monitoring drinking water quality. Environmental monitoring of antibiotics, hormones, endocrine disrupting chemicals, and pesticides in real water samples (e.g. surface, ground or drinking water) with difficult matrices places high demands on chemical analysis. Biosensors have suitable characteristics such as efficiency in allowing very fast, sensitive, and cost-effective detection. Here we describe an assay optimization process with a fully automated immunoassay for estrone which resulted in a LOD below 0.20 ng L⁻¹ and a LOQ below 1.40 ng L⁻¹. In contrast to common analytical methods such as GC-MS or HPLC-MS, the biosensor used requires no sample pre-treatment and pre-concentration. The very low validation parameters for estrone are the result of the continuous optimization of the immunoassay. The basis of our sensitive assay is the antibody with a high affinity constant towards estrone. During the optimization process, we reduced the amount of antibody per sample and improved the chip surface modification. Finally, this proceeding led to a calibration routine with an amount of antibody of only 3.0 ng per sample (sample volume: 1.0 mL). The reduction of the amount of antibody per sample results in better validation parameters (LOD, LOQ, and IC₅₀), but this reduction leads to the current device-related limitation of the River Analyser (RIANA).For some endocrine disrupting compounds, no effect levels (NOELs) in the lower nanogram per liter range are reported. This defines the challenge, which analytical methods have to compete with and our RIANA instrument with its improved sensitivity for the detection of a single hormone in the lower nanogram per liter range is a powerful tool in aquatic analytics in addition to the common analytical methods.     

Cyclisierungen unter beteiligung von fluoridionen. 2. Mitteil. [1], [2]. 4.5-perfluor-1.3-dioxolane

4.5-Perfluoro-1.3-dioxolanes $\text{2}$ are available by reaction of 2(α-chloroalkoxy)perfluoro-carbonyl halides $\text{3}$ or -ketone $\text{9}$ with fluoride ions. A mechanism for the intramolecular ring- closure-reaction is proposed. Hydrogen atoms at C-2 in $\text{2}$ can be exchanged photochemically by chlorine. Starting from the 2-monochloro-derivatives $\text{16}$ the 2-monofluoro-4.5-perfluoro- 1.3-dioxolanes $\text{18}$ are formed by reaction with triethylamine- hydrofluoride.     

Hydroxybromierung und Methoxybromierung von (Z)-Cycloocten

In addition totrans-2-bromocyclooctanol andtrans-1,2-dibromocyclooctane,cis-4-bromocyclooctanol,cis-1,4-dibromocyclooctane,trans-1,4-dibromocyclooctane, and (Z)-5-bromocyclooctene are obtained, when (Z)-cyclooctene is treated with N-bromosuccinimide in the presence of water. Similarly the methoxybromination of (Z)-cyclooctene gives transanular products.     

Transannular O-heterocyclization of twelve and thirteen membered trienes by methoxybromination procedure

The reaction of (E,E,Z)-cyclododeca-1.5,9-triene (1) with NBS and methanol gives bicyclic tetrahydrofuran derivatives (3) and (4) as well as usual 1,2-addition products while the related reaction with (Z,E,Z)-cyclotrideca-1,5,9-triene (7) leads to the bicyclic tetrahydropyran derivative (6), in both cases like O-heterocyclization products as the result of transannular participation of a methoxy group.     

Synthesis and antiviral activity of monofluorinated cyclopropanoid nucleosides

Diastereopure monofluorinated cyclopropanoid nucleosides were synthesized for biological studies. As key intermediates cis- and trans-(+/-)-[1-fluoro-2-(acetoxymethyl)cyclopropyl]methanol were prepared starting from diastereopure fluorinated cyclopropanecarboxylates. The latter were synthesized by copper(i)-catalyzed cyclopropanation of [small alpha]-fluorostyrene with ethyl diazoacetate. After reduction and O-acetylation the diastereomeric (2-fluoro-2-phenylcyclopropyl)methyl acetates were obtained. Oxidative degradation using RuO(4) and reduction of the formed carboxyl group with borane gave the fluorinated alcohols, which were coupled with different nucleobases. After deprotection, the corresponding cyclopropanoid nucleosides of adenine, cytosine, guanine, thymine and uracil were obtained. Antiviral tests revealed for the cis-configured guanosine a low, but specific activity against HSV-1 and HSV-2. In addition low affinities of the adenine derivatives to adenosine receptors were detected.     

The electron impact fragmentation of 3- and 4-styrylpyridazine

The electron impact mass spectrometric fragmentation of trans-3- and trans-4-styrylpyridazine is reported in detail, including a comparison with other aza-stilbenes. With regard to a distinction between the two isomeric styrylpyridazines, the intensity ratio of the M⁺ and [M-1]⁺ ions, the general degree of fragmentation and the elimination pathways of nitrogen proved to be most characteristic.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.