活性炭自溶液吸附锌(II)离子及其配合物

近年来，有人提出通过表面处理提高活性炭表面电荷，加强对无机离子吸附力等观点，但活性炭对无机离子的吸附活性点，表面含氧基团及配体对吸附的影响等重要问题仍众说纷经[1－4]为此，本文提出用氧化一负离子化法处理活性炭，以表面酸度表征表面含氧基团的量，探讨活性炭对Zn（Ⅱ）及其配合物的吸附特性．1试验（1）试验材料活性发由北京光华木材厂出品，分析纯．过20－30目，BET法测得比表面为1316m2·g-1．在2．5×10－2mlo·dm－3的NaNO3中，测得等电点pHIEP为7．75[5]，元素含量（质量分数）为C（83．9％），N（0．07％），H（1…     

盐酸溶液中阴离子表面活性剂在铝表面上的吸附

用失重法研究了盐酸溶液中阴离子表面活性剂十二烷基磺酸钠（ＤＳＡＳＳ），十二烷基苯磺酸钠（ＤＢＳＡＳ）以及十二烷基硫酸钠（ＳＤＳ）在铝表面上的吸附作用，提出这种吸附作用与铝的失重量有关，且符合Ｌａｎｇ－ｍｕｉｒ方程，计算出吸附热，吸附熵和吸附自由能等热力学参数。认为这种吸附主要靠静电作用，根据接触角的变化讨论了阴离子表面活性剂分子在铝表面上的吸附取向。     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

Unusual Skeletal Reorganization of Oxetanes for the Synthesis of 1,2‐Dihydroquinolines

Skeletal reorganization is a type of fascinating transformations owing to their intriguing mechanisms and utility in complex molecule synthesis. However, only a limited amount of examples are known for most functional groups. Herein, we describe such an unusual process of oxetanes. In the presence of In(OTf)₃ as catalyst, oxetane‐tethered anilines reacted unexpectedly to form 1,2‐dihydroquinolines. This process not only provides expedient access to dihydroquinolines, but also represents a new reaction of oxetane. Mechanistically, it is believed that the reaction proceeds through initial nitrogen attack rather than arene attack followed by a series of bond cleavage and formation events. Control experiments provided important insights into the mechanism.     

Cu催化的单电子转移活性自由基聚合制备石墨烯/聚N,N-二甲基丙烯酰胺复合体系

以天然石墨为起始原料,采用改进的Hummer方法,通过强酸氧化水解和超声分散制备了氧化石墨烯,然后通过肼还原和重氮化反应得到含有羟基的石墨烯(G-OH),再通过酯化反应在石墨烯表面上引入了α-氯代羰基,从而得到了含有单电子转移活性自由基聚合(SET-LRP)引发基团的石墨烯(G-Cl).最后,在石墨烯表面原位引发N,N-二甲基丙烯酰胺(DMAA)单体的SET-LRP聚合,得到了G-PDMAA复合材料,G-PDMAA在常规的有机溶剂和水中具有良好的分散性.     

A convergence of photo‐bergman cyclization and intramolecular chain collapse towards polymeric nanoparticles

Employing enediynes as crosslinking precursors, a novel yet efficient strategy, namely photo‐triggered Bergman cyclization, was integrated with intramolecular chain collapse to yield polymeric nanoparticles with the size regime below 20 nm. Enediyne motif was designed delicately to possess a high photo‐reactivity, with the double bond locked in a methyl benzoate ring while triple bonds substituted with phenyls. Single electron transfer‐living radical polymerization was conducted to provide linear acrylate copolymers with controlled molecular weights and narrow polydispersities. Poly(butylarylate‐co‐ 5 ) went through UV‐irradiation with a concurrent Bergman cyclization, resulting in well‐defined ultrafine polymeric nanoparticles. Results from NMR, Raman scattering, photoluminescence and UV‐vis spectra corroborated the presence of conjugative structures in the polymeric nanoparticles, indicating the occurrence of photo‐induced Bergman cyclization. A series of other acrylate‐based nanoparticles were investigated to confirm the applicability of such a unique strategy in thermal sensitive but UV‐stable polymeric structures, making photo‐Bergman cyclization a promising tool towards polymeric nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A novel technology for the detection, enrichment, and separation of trace amounts of target DNA based on amino-modified fluorescent magnetic composite nanoparticles

A novel, highly sensitive technology for the detection, enrichment, and separation of trace amounts of target DNA was developed on the basis of amino-modified fluorescent magnetic composite nanoparticles (AFMN). In this study, the positively charged amino-modified composite nanoparticles conjugate with the negatively charged capture DNA through electrostatic binding. The optimal combination of AFMN and capture DNA was measured by dynamic light scattering (DLS) and UV–vis absorption spectroscopy. The highly sensitive detection of trace amounts of target DNA was achieved through enrichment by means of AFMN. The detection limit for target DNA is 0.4 pM, which could be further improved by using a more powerful magnet. Because of their different melting temperatures, single-base mismatched target DNA could be separated from perfectly complementary target DNA. In addition, the photoluminescence (PL) signals of perfectly complementary target DNA and single-base mismatched DNA as well as the hybridization kinetics of different concentrations of target DNA at different reaction times have also been studied. Most importantly, the detection, enrichment, and separation ability of AFMN was further verified with milk. Simple and satisfactory results were obtained, which show the great potential in the fields of mutation identification and clinical diagnosis.     

Growth of SnO2 nanoparticles via thermal evaporation method

Tin oxide (SnO₂) nanoparticles were fabricated by evaporation of Sn powers at 1000 °C in air pressure. The as-deposited SnO₂ particles were single crystal structure, which were mostly spherical shape, the diameter of particles was ranging from 200 to 600 nm. The photoluminescence (PL) spectrum showed that a sharp emission peak at around 393 nm with the excitation wavelength at 325 nm, which suggested possible applications in nanoscaled optoelectronic devices. It was also found that the holding time affects the morphology of the products. The formation mechanism of SnO₂ particles was discussed.