Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Magnetisation reversal in media with perpendicular anisotropy

In this paper, we discuss two key aspects of magnetisation reversal in magnetic thin films with perpendicular anisotropy. Firstly, a study has been made of the additional field required to erase data written perpendicular to a thin film recording disk as the linear data density is increased. It has been found that an increase in data density from 40 to 360 kfci results in an increase of 1.25 kOe in the field required to erase the data. Secondly, the effect of varying the level of exchange coupling by co-sputtering CoCrPt samples with SiO₂ has been studied using a characterisation technique that is independent of the self-demagnetising field. It has been found that the samples are fully exchange de-coupled when the film contains >9.8% SiO₂ and the activation volume of reversal remains constant for higher levels of SiO₂.     

Vibration intervals for tritiated H+3 and D+3

Ab initio calculated values of fundamental vibrational frequencies and zero-point energies are presented for HTD⁺, D₂T⁺, T₂D⁺, H₂T⁺, T₂H⁺ and T⁺₃.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

A parallel computational method for simulating two‐phase gel dynamics on a staggered grid

We develop a parallel computational algorithm for simulating models of gel dynamics where the gel is described by two phases, a networked polymer and a fluid solvent. The models consist of transport equations for the two phases, two coupled momentum equations, and a volume‐averaged incompressibility constraint. Multigrid with Vanka‐type box‐relaxation scheme is used as preconditioner for the Krylov subspace solver (GMRES) to solve the momentum and incompressibility equations. Through numerical experiments of a model problem, the efficiency, robustness and scalability of the algorithm are illustrated. Copyright © 2008 John Wiley & Sons, Ltd.