Thermal study of CoxZn7-xSb2O12 spinel obtained by pechini method using different alcohols

With the aim of obtaining materials with applications in pigments, Co_xZn_7-xSb₂O₁₂ spinels were synthesized using the Pechini method. This method consists in the formation of a polymeric net, where the metallic cations are homogeneously distributed. In this work, two types of alcohol (ethyl glycol and ethylene glycol) were used for the synthesis of a zinc antimoniate spinel, Co_xZn_7-xSb₂O₁₂ (x=0-7). The materials were characterized by termogravimetry (TG) and differential thermal analysis (DTA). TG results indicated a decrease in total mass loss when cobalt was added to the solution substituting zinc, for samples prepared using the two different alcohols. Decomposition temperatures, obtained by TG and DTA, presented a decreasing behavior as cobalt was added to the material. In relation to the alcohols, all results indicated a better polymerization of the resin when ethylene glycol was used, being the most indicated one for cation immobilization. X-ray diffraction did not show differences between the two alcohols - both presented the spinel phase (Co, Zn)_2.33Sb₀.₆₇O₄. Samples with higher quantity of cobalt also presented ilmenite phase (Co, Zn)Sb₂O₆. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrostatic patterning of a silica surface: a new model for charge build-up on a dielectric solid

The polarization of interdigitated gold electrodes mounted over a silica thin film formed by oxidation of a Si wafer produces reproducible electrostatic patterns with overall excess negative charge, as observed by scanning electric potential microscopy. Domain charge concentrations as high as 76 charge units per square micrometer are obtained when a 5 V difference is applied to the electrodes thus producing fields in the 10(6) V m(-1) range. These patterns vanish when the electrodes are short-circuited and grounded. Characteristic times for pattern formation and relaxation are in the order of 10 min. The results are consistent with a model based on the discharge of H(+) ions at the negative electrodes, leaving behind immobile surface-bound SiO(-) groups and thus showing that chemisorption phenomena are decisive for electrostatic charging of insulators.     

New data on the GSJ reference rocks JB-1a and JG-1a by instrumental neutron activation analysis

Two reference rocks of the Geological Survey of Japan have been analyzed for Na, K, Sc, Cr, Fe, Co, Zn, Rb, Cs, Ba, La, Ce, Nd, Sm, Eu, Tb, Yb, Lu, Hf, Ta, Th and U, using instrumental neutron activation analysis. The results are reported and compared with consensus values proposed in the literature. In general, the agreement is good except for Cs.     

Layer‐by‐layer deposition of antimicrobial polymers on cellulosic fibers: a new strategy to develop bioactive textiles

In recent years, there has been an increase of infectious diseases caused by different microorganisms and the development of antibiotic resistance. In this way, the search for new and efficient antibacterial materials is imperative. The main polysaccharides currently used in the biomedical and pharmaceutical domains are chitin and its derivative chitosan (CH) and alginates (ALG). In this study, a simple technique of Layer by Layer (LbL) of applying polycation CH and polyanion ALG was used to prepare CH/ALG multilayers on cotton samples via the electrostatic assembly with success. The CH/ALG cotton samples (functionalized) were investigated for their antibacterial properties towards Staphylococcus aureus and Klebsiella pneumonia using the international standard method JIS L 1902:2002. The antibacterial activity of the functionalized samples was tested in terms of bacteriostatic and bactericidal activity, and results showed that the samples exhibited a bacteriostatic effect on the two bacteria tested, as expected. In addition, samples with five layers (CH/ALG/CH/ALG/CH) were more effective in inhibiting bacterial growth. This new coating for cellulosic fibers is a new strategy and may open new avenues for the development of antimicrobial polymers with potential application in health‐care field. Copyright © 2013 John Wiley & Sons, Ltd.     

Non-conventional oils for biodiesel production: a study of thermal and oxidative stability

Vegetable oils with variable proportions of oleic, linoleic, and linolenic acids are more susceptible to oxidative processes. In this subject, this study evaluates the physical chemical properties and oxidative stability of non-conventional oils such as andiroba, babassu, sesame, oiticica, jatropha, and grape through accelerated oxidation techniques (pressurized differential scanning calorimetry, Rancimat and PetroOxy). It was verified that babassu and andiroba oil do not showed detectable induction period presenting high oxidative stability; moreover, it was observed that the enthalpic events occurred in 1.19, >10, 0.53, 0.49, 0.49, and 0.60 h for the andiroba oil, babassu oil, sesame seeds, jatropha, oiticica oils, and grapes, respectively, stimulating the conclusion of greater stability for the babassu oil.     

Reactivity of Aliphatic and Phenolic Hydroxyl Groups in Kraft Lignin towards 4,4′ MDI

Several efforts have been dedicated to the development of lignin-based polyurethanes (PU) in recent years. The low and heterogeneous reactivity of lignin hydroxyl groups towards diisocyanates, arising from their highly complex chemical structure, limits the application of this biopolymer in PU synthesis. Besides the well-known differences in the reactivity of aliphatic and aromatic hydroxyl groups, experimental work in which the reactivity of both types of hydroxyl, especially the aromatic ones present in syringyl (S-unit), guaiacyl (G-unit), and p-hydroxyphenyl (H-unit) building units are considered and compared, is still lacking in the literature. In this work, the hydroxyl reactivity of two kraft lignin grades towards 4,4′-diphenylmethane diisocyanate (MDI) was investigated. ³¹P NMR allowed the monitoring of the reactivity of each hydroxyl group in the lignin structure. FTIR spectra revealed the evolution of peaks related to hydroxyl consumption and urethane formation. These results might support new PU developments, including the use of unmodified lignin and the synthesis of MDI-functionalized biopolymers or prepolymers.     

Impact of High-Pressure Homogenization on the Cell Integrity of Tetradesmus obliquus and Seed Germination

Microalgae have almost unlimited applications due to their versatility and robustness to grow in different environmental conditions, their biodiversity and variety of valuable bioactive compounds. Wastewater can be used as a low-cost and readily available medium for microalgae, while the latter removes the pollutants to produce clean water. Nevertheless, since the most valuable metabolites are mainly located inside the microalga cell, their release implies rupturing the cell wall. In this study, Tetradesmus obliquus grown in 5% piggery effluent was disrupted using high-pressure homogenization (HPH). Effects of HPH pressure (100, 300, and 600 bar) and cycles (1, 2 and 3) were tested on the membrane integrity and evaluated using flow cytometry and microscopy. In addition, wheat seed germination trials were carried out using the biomass at different conditions. Increased HPH pressure or number of cycles led to more cell disruption (75% at 600 bar and 3 cycles). However, the highest increase in wheat germination and growth (40–45%) was observed at the lowest pressure (100 bar), where only 46% of the microalga cells were permeabilised, but not disrupted. Non-treated T. obliquus cultures also revealed an enhancing effect on root and shoot length (up to 40%). The filtrate of the initial culture also promoted shoot development compared to water (21%), reinforcing the full use of all the process fractions. Thus, piggery wastewater can be used to produce microalgae biomass, and mild HPH conditions can promote cell permeabilization to release sufficient amounts of bioactive compounds with the ability to enhance plant germination and growth, converting an economic and environmental concern into environmentally sustainable applications.     

Analysis of the CCRMP reference rocks SY-2, SY-3 and MRG-1 by instrumental neutron activation

Three Canadian reference rocks, syenites SY-2 and SY-3, and gabbro MRG-1 have been analysed for Na, K, Sc, Cr, Fe, Co, Zn, As, Rb, Cs, Ba, La, Ce, Nd, Sm, Eu, Tb, Yb, Lu, Hf, Ta and Th, by instrumental neutron activation analysis. The results are reported and compared with usable values. In general the agreement is good.     

Investigation of the onset and development of forward scattering in an underdense plasma

We investigate the distortion of a spatial intensity modulation imposed on a 527 nm f/10 probe beam as it transmits through an underdense plasma characterized with Thomson scattering. Combining the measurements with full wave simulations of beam propagation through the entire plasma show that the key features of the data can be reproduced using the Kaiser thermal transport model.     

Time-periodic perturbation of a Liénard equation with an unbounded homoclinic loop

We consider a quadratic Liénard equation with an unbounded homoclinic loop, which is a solution tending in forward and backward time to a non-hyperbolic equilibrium point located at infinity. Under small time-periodic perturbation, this equilibrium becomes a normally hyperbolic line of singularities at infinity. We show that the perturbed system may present homoclinic bifurcations, leading to the existence of transverse intersections between the stable and unstable manifolds of such a normally hyperbolic line of singularities. The global study concerning the infinity is performed using the Poincaré compactification in polar coordinates, from which we obtain a system defined on a set equivalent to a solid torus in R³, whose boundary plays the role of the infinity. The transversality of the manifolds is proved using the Melnikov method and implies, via the Birkhoff-Smale Theorem, a complex dynamical behaviour of the perturbed system solutions in the finite part of the phase space. Numerical simulations are performed in order to illustrate this behaviour, which could be called “the chaos arising from infinity”, since it depends on the global structure of the Liénard equation, including the points at infinity. Although applied to a particular case, the analysis presented provides a geometrical approach to study periodic perturbations of homoclinic (or heteroclinic) loops to infinity of any planar polynomial vector field.