Selenium in electrolytic manganese as a reference material for the quality control of aluminium melts

Electrolytic manganese is an important alloying element for aluminium and steel melts. It is mainly added to melts of aluminium in the holding furnace as tablets or minitablets (compressed compacts of manganese and aluminium powders). Selenium derivates are usually added during the production of electrolytic manganese, so some selenium is present in the alloys produced when electrolytic manganese is added to the aluminium furnace. Since the selenium contents of many alloys are of concern from health and environmental perspectives, their values should be provided. In this work, a laboratory reference material (LRM) based on electrolytic manganese was produced to assure our routine quality control method, where selenium is analysed by hydride generation followed by optical emission spectrometry with inductively coupled plasma (HG–ICP–OES). Therefore, the present paper describes in detail the preparation procedure for and the results from homogeneity and stability studies performed on electrolytic manganese LRM. For this purpose, a commercial electrolytic manganese lot was selected and the main factors involved in the preparation of the material (pretreatment step, homogenization, bottling and storage) were carefully studied and established in order to guarantee the long-term stability of the LRM. The results obtained showed that the LRM developed was a fit-for-purpose material for the quality control of the routine analysis of selenium.     

Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants

Continuous flow injection and UV spectrophotometric detection have been proposed for simultaneous determination of the two binary mixtures, butylated hydroxytoluene (BHT)/n-propyl gallate (n-PG) and butylated hydroxytoluene (BHT)/butylated hydroxyanisole (BHA), in food and cosmetics samples. The method is based on the different residence times of each antioxidant when the flow cell is packed to a height of 25 mm with silica C₁₈ using methanol-water 50:50% (v/v) as a carrier with a flow rate of 1.25 and 1.10 ml min⁻¹, respectively. The determination of each antioxidant is based on the measurement of its absorbance at its maximum wavelengths using a DAD detector at 30 and 180 s for the mixture n-PG-BHT and 90 and 220 s for BHA-BHT. Calibration graphs were linear over the range 10.0-300.0 μg ml⁻¹ for each antioxidant in both mixtures. The relative standard deviations were 2.5% for BHT and 2.0% for the co-existing antioxidant. Resolution of the n-PG-BHT mixture in ratios between 1:8 and 8:1 and the BHA-BHT mixture in ratios between 1:10 and 10:1 is possible. The method was applied to the determination of both antioxidants in fat foods and cosmetics samples with recoveries ranging between 101 and 105%.     

The first immobilization of pyridine-bis(oxazoline) chiral ligands

[formula: see text] A chiral pyridine-bis(oxazoline) ligand, functionalized with a vinyl group in the pyridine ring, can be polymerized with styrene and divinylbenzene to obtain supported chiral ligands. As proof of the usefulness of this supported ligands, the corresponding ruthenium complexes are catalysts for the cyclopropanation reaction of styrene with ethyl diazoacetate with up to 85% ee.     

Real‐time Probing the Formation of [M(2,2‐bipyridine)2(NO3)3] (M = Ce,La, Tb) Complexes and Influence of Synthesis Parameters

Despite the strong technological importance of lanthanide complexes, their formation processes are rarely investigated. This work is dedicated to determining the influence of synthesis parameters on the formation of [Ce(bipy)₂(NO₃)₃] as well as Ce³⁺‐ and Tb³⁺‐substituted [La(bipy)₂(NO₃)₃] (bipy = 2,2′‐bipyridine) complexes. To this end, we performed in situ luminescence measurements, synchrotron‐based X‐ray diffraction (XRD) analysis, infrared spectroscopy (IR), and measured pH value and/or ion conductivity during their synthesis process under real reaction conditions. For the [Ce(bipy)₂(NO₃)₃] complex, the in situ luminescence measurements initially presented a broad emission band at 490 nm, assigned to the 5d→4f Ce³⁺ ions within the ethanolic solvation shell. Upon the addition of bipy, a red shift to 700 nm was observed. This shift was attributed to the changes in the environment of the Ce³⁺ ions, indicating their desolvation and incorporation into the [Ce(bipy)₂(NO₃)₃] complex. The induction time was reduced from 8 to 3.5 min, by increasing the reactant concentration by threefold. In contrast, [La(bipy)₂(NO₃)₃] crystallized within days instead of minutes, unless influenced by high Ce³⁺ and Tb³⁺ concentrations. Monitoring and controlling the influence of the reaction parameters on the structure of emissive complexes is important for the development of rational synthesis approaches and optimization of their structure‐related properties like luminescence.     

Synthesis and Study of the Photophysical Properties of a New Eu<Superscript>3+</Superscript> Complex with 3-Hydroxypicolinamide

This work reports on the synthesis and characterization of a new complex of Eu³⁺ with the 3-hydroxypicolinamide ligand (Hhpa). Here we present an approach for obtaining bis[2-carbamoyl(κO)pyridin-3-olato(κO’)] lanthanide complexes, which were characterized through elemental analysis, thermal analysis, infrared and photoluminescence spectroscopies (emission, excitation, luminescence lifetimes, quantum efficiencies, Judd-Ofelt parameters and quantum yields). Although hpa can act as a bidentate ligand in different conformations, the results attest for the occurrence of a unique coordination site of low symmetry for the Eu³⁺ ions, in which two anionic hpa ligands coordinate the cations through an O/O chelating system. The phosphorescence of the synthesized gadolinium complex provides the energy of the triplet state, which is determined to be at 20,830 cm^-1 over the ground state. This makes the Hhpa ligand very adequate for sensitizing the Eu³⁺ luminescence, which leads to a very efficient antenna effect and opens a wide range of applications for the complex in light emitting organic-inorganic devices.     

Luminescent dendrimers as ligands for metal ions

Suitably designed luminescent dendrimers can play a role of ligands for luminescent and non-luminescent metal ions. This combination leads to species capable of exhibiting interesting and unusual properties, including (i) shielding excited states from quenching processes, (ii) light harvesting, (iii) conversion of incident UV light into visible or infrared emission, and (iv) metal ions sensing with signal amplification.     

Deep Learning for Walking Behaviour Detection in Elderly People Using Smart Footwear

The increase in the proportion of elderly in Europe brings with it certain challenges that society needs to address, such as custodial care. We propose a scalable, easily modulated and live assistive technology system, based on a comfortable smart footwear capable of detecting walking behaviour, in order to prevent possible health problems in the elderly, facilitating their urban life as independently and safety as possible. This brings with it the challenge of handling the large amounts of data generated, transmitting and pre-processing that information and analysing it with the aim of obtaining useful information in real/near-real time. This is the basis of information theory. This work presents a complete system aiming at elderly people that can detect different user behaviours/events (sitting, standing without imbalance, standing with imbalance, walking, running, tripping) through information acquired from 20 types of sensor measurements (16 piezoelectric pressure sensors, one accelerometer returning reading for the 3 axis and one temperature sensor) and warn the relatives about possible risks in near-real time. For the detection of these events, a hierarchical structure of cascading binary models is designed and applied using artificial neural network (ANN) algorithms and deep learning techniques. The best models are achieved with convolutional layered ANN and multilayer perceptrons. The overall event detection performance achieves an average accuracy and area under the ROC curve of 0.84 and 0.96, respectively.     

[M(bpy)3] (M = Fe,Ru, Os): New Crystalline Materials from the reductive electrocrystallization of [M(bpy)3](PF6)2

Reductive electrocrystallization at a constant current density (11.0–11.5 μA/cm²) of millimolar solutions of [M(bpy)₃](PF₆)₂, where M = Fe, Ru, or Os, and bpy = 2,2′-bipyridine in acetonitrile containing 0.1M Bu₄NPF₆ results in the formation of dark crystals on the Pt cathode. The crystals grow as long, thin, and shiny needles having a hexagonal cross section of 0.1–0.5 mm in diameter. Combustion microanalyses results are consistent with the composition for [Fe(bpy)₃], [Ru(bpy)₃], and [Os(bpy)₃]. In addition, the chromophores are conserved, as confirmed by recording both the electronic and the ¹H-NMR spectra after reoxidation of the electrocrystals in humid air. The spectra are identical to those for authentic samples of [Fe(bpy)₃]²⁺, [Ru(bpy)₃]²⁺, and [Os(bpy)₃]²⁺. A ratio of 2.0 ± 0.1 e^?/molecule is observed upon completion of the controlled potential electrolysis of a solution of [M(bpy)₃]²⁺, which results in the precipitation of a dark solid and the almost complete fading of the color of the original solution. Unexpectedly, the crystals do not exhibit an ESR signal. These data indicate the formation of novel materials, crystalline [Fe(bpy)₃], [Ru(bpy)₃], and [Os(bpy)₃].