Evaluation of gas chromatography-tandem quadrupole mass spectrometry for the determination of organochlorine pesticides in fats and oils

A gas chromatography-tandem quadrupole mass spectrometry multi-residue method for the analysis of 19 organochlorine pesticides in fats and oils has been developed. Gel permeation chromatography was employed to remove lipid material prior to GC-MS/MS analysis. Average recoveries of the pesticides spiked at 10 and 50 microg kg(-1) into fish oil, pork fat, olive oil and hydrogenated vegetable oil were typically in the range 70-110% with relative standard deviations generally less than 10%. Calculated limits of detection are between 0.1 and 2.0 microg kg(-1) and results obtained for the analysis of proficiency test materials are in good agreement with assigned values. The higher selectivity of the GC-MS/MS compared to electron capture detection and GC-MS in selective ion monitoring mode allowed unambiguous identification and confirmation of all the target pesticides at low microg kg(-1) levels in fats and oils in a single analysis.     

Liquid chromatographic determination of 4,4'-dinitrocarbanilide, the active component of the infertility agent nicarbazin, in chicken, duck, goose, and snake eggs

4,4'-Dinitrocarbanilide (DNC) was extracted from chicken, duck, goose, and snake eggs and isolated by reversed-phase liquid chromatography. DNC was detected by ultraviolet absorbance at 347 nm and quantitated by comparison with a calibration standard. Recoveries of DNC from fortified control chicken, duck, goose, and snake egg samples were determined for DNC levels of 0.16, 10, and 16 microg/g. The mean recoveries from chicken, duck, goose, and snake eggs were 92 +/- 4, 88 +/- 9, 87 +/- 7, and 95 +/- 6%, respectively. The method limits of detection for DNC in chicken, duck, goose, and snake eggs ranged from 0.015 to 0.035 microg/g. The reported method is much simpler than and equally efficient as previous methods developed for the determination of DNC residues in egg contents.     

Chiral separation of β-amino alcohols by capillary electrophoresis using cyclodextrins as buffer additives. I. Effect of varying operating parameters

Summary Capillary electrophoresis has been used for the chiral analysis of two -amino alcohol pharmaceutical compounds. Capillary zone electrophoresis conditions were used with -cyclodextrin as a chiral mobile phase additive. The effects of variation of -cyclodextrin concentration, temperature, pH, background electrolyte composition and concentration have been investigated. Optimum separations were achieved for clenbuterol using -cyclodextrin at its solubility limit (16mM), the lowest practicable temperature (19°C), pH 4.0 and an electrolyte solution with a high ionic strength prepared from 0.1 M citric acid and 0.3 M Na₂HPO₄. For the development compound picumeterol and its (S)-enationmer, the optimum pH 4.0 buffer was prepared from 0.1 M citric acid and 0.2 M sodium acetate. Baseline separation with resolution greater than 2 was achieved for both compounds.This work was presented in part at the 2nd International Symposium on Chiral Discrimination, Rome, May 27–31, 1991.     

Separation of iota-, kappa and lambda-carrageenans by capillary electrophoresis

The present study reports a novel method for the separation of the high-molecular-weight anionic polysaccharides, iota, kappa, and lambda carrageenans, in capillary electrophoresis (CE). Carrageenan samples are first derivatised with 9-aminopyrene-1,4,6-trisulfonic acid (APTS), separated in an ammonium acetate background electrolyte (BGE) and detected with laser-induced fluorescence (LIF). The effects of changes of instrumental parameters (temperature, injection mode, field strength) and the composition of the BGE (concentration and pH) are reported, and are explained in terms of the physical chemistry of the BGE and the biopolymers. Optimal separation conditions for kappa, iota, and lambda carrageenans, including an APTS internal standard, were found in a polyvinyl alcohol coated capillary with an ammonium acetate BGE of low concentration (25 mM) and moderate pH (8.0). This BGE gave the best reproducibility in tests on iota/kappa mixtures, with relative standard deviations (RSDs) in migration times and normalised peak areas (relative to the APTS internal standard) of less than 0.1% and 1%, respectively. Using this BGE at 50 degrees C and a voltage of 30 kV, all three carrageenan subtypes were separated in a run time of 3 min.     

Solvent-Free Synthesis of Core-Functionalised Naphthalene Diimides by Using a Vibratory Ball Mill: Suzuki,Sonogashira and Buchwald–Hartwig Reactions

Solvent-free synthesis by using a vibratory ball mill (VBM) offers the chance to access new chemical reactivity, whilst reducing solvent waste and minimising reaction times. Herein, we report the core functionalisation of N,N’-bis(2-ethylhexyl)-2,6-dibromo-1,4,5,8-naphthalenetetracarboxylic acid (Br₂-NDI) by using Suzuki, Sonogashira and Buchwald–Hartwig coupling reactions. The products of these reactions are important building blocks in many areas of organic electronics including organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic cells (OPVCs). The reactions proceed in as little as 1 h, use commercially available palladium sources (frequently Pd(OAc)₂) and are tolerant to air and atmospheric moisture. Furthermore, the real-world potential of this green VBM protocol is demonstrated by the double Suzuki coupling of a monobromo(NDI) residue to a bis(thiophene) pinacol ester. The resulting dimeric NDI species has been demonstrated to behave as an electron acceptor in functioning OPVCs.     

Separation and characterisation of caprolactam-formaldehyde reaction products

Methylolation and condensation products formed in caprolactam-formaldehyde reaction mixtures have been identified using nuclear magnetic resonance (NMR) and mass spectrometry (MS). Previously unreported side-products were also detected. All of the reaction products were separated by micellar electrokinetic chromatography (MEKC) and high performance liquid chromatography (HPLC), and the separation parameters, such as efficiency and distribution constants, obtained in the two techniques were compared. For quantification, the response factors for the monomers were determined using standard calibration and hydrolysis, whilst those for the condensation products were deduced from the values of the monomers. The accurate determination of the response factors was confirmed by checking the mass balance of a known mixture.     

Studies in metal sulphite chemistry—III

Manganese(II) iodide, iron(II) iodide and copper(I) iodide each react with tetramethylammonium disulphite to form anhydrous manganese(II) sulphite, iron(II) sulphite and copper(I) disulphite respectively. Iron(II) sulphite and copper(I) disulphite react with dimethylsulphoxide-sulphur dioxide to form iron(II) disulphate and copper(II) disulphate respectively. Hydrated sulphites of manganese(II), iron(II), magnesium(II) and calcium(II) were also prepared. The properties of the sulphites were investigated using thermogravimetric and IR measurements.     

Syntheses of dendritic branches based on L-lysine: is the stereochemistry preserved throughout the synthesis?

This paper reports the syntheses of individual dendritic branches based on L-lysine and functionalised with either Boc or Bz surface groups. Convergent and divergent synthetic approaches were employed and the preservation of stereochemistry during the syntheses was monitored using polarmetry, NMR and HPLC. In addition, racemic dendritic branches based on D,L-lysine were synthesised for comparative purposes. It was observed that the preservation of stereochemistry in the dendritic peptide was dependent on the method of synthesis, with divergent methodology being preferred. The results are discussed in terms of the known stereochemical outcomes of traditional peptide coupling processes, and are generalised to the synthesis of other dendritic peptides. Such observations about the chirality of dendritic peptides are of relevance to chemists developing dendritic systems for applications where single enantiomer dendrimers would clearly be preferred, such as enantioselective catalysis or pharmaceutical chemistry.     

High Entropy Alloys as Filler Metals for Joining

In the search for applications for alloys developed under the philosophy of the High Entropy Alloy (HEA)-type materials, the focus may be placed on applications where current alloys also use multiple components, albeit at lower levels than those found in HEAs. One such area, where alloys with complex compositions are already found, is in filler metals used for joining. In soldering (<450 °C) and brazing (>450 °C), filler metal alloys are taken above their liquidus temperature and used to form a metallic bond between two components, which remain both unmelted and largely unchanged throughout the process. These joining methods are widely used in applications from electronics to aerospace and energy, and filler metals are highly diverse, to allow compatibility with a broad range of base materials (including the capability to join ceramics to metals) and a large range of processing temperatures. Here, we review recent developments in filler metals relevant to High Entropy materials, and argue that such alloys merit further exploration to help overcome a number of current challenges that need to be solved for filler metal-based joining methods.     

Advanced solvent signal suppression for the acquisition of 1D and 2D NMR spectra of Scotch Whisky

A simple and robust solvent suppression technique that enables acquisition of high‐quality 1D ¹H nuclear magnetic resonance (NMR) spectra of alcoholic beverages on cryoprobe instruments was developed and applied to acquire NMR spectra of Scotch Whisky. The method uses 3 channels to suppress signals of water and ethanol, including those of ¹³C satellites of ethanol. It is executed in automation allowing high throughput investigations of alcoholic beverages. On the basis of the well‐established 1D nuclear Overhauser spectroscopy (NOESY) solvent suppression technique, this method suppresses the solvent at the beginning of the pulse sequence, producing pure phase signals minimally affected by the relaxation. The developed solvent suppression procedure was integrated into several homocorrelated and heterocorrelated 2D NMR experiments, including 2D correlation spectroscopy (COSY), 2D total correlation spectroscopy (TOCSY), 2D band‐selective TOCSY, 2D J‐resolved spectroscopy, 2D ¹H, ¹³C heteronuclear single‐quantum correlation spectroscopy (HSQC), 2D ¹H, ¹³C HSQC‐TOCSY, and 2D ¹H, ¹³C heteronuclear multiple‐bond correlation spectroscopy (HMBC). A 1D chemical‐shift‐selective TOCSY experiments was also modified. The wealth of information obtained by these experiments will assist in NMR structure elucidation of Scotch Whisky congeners and generally the composition of alcoholic beverages at the molecular level.