Mass Power Spectrum in a Universe Dominated by the Chaplygin Gas

The mass power spectrum for a Universe dominated by the Chaplygin gas is evaluated numerically from scales of the order of the Hubble horizon to 100 Mpc. The results are compared with a pure baryonic Universe and a cosmological constant model. In all three cases, the spectrum increases with k, the wavenumber of the perturbations. The slope of the spectrum is higher for the baryonic model and smaller for the cosmological constant model, the Chaplygin gas interpolating these two models. The results are analyzed in terms of the sound velocity of the Chaplygin gas and the moment the Universe begins to accelerate.     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Preparation of benzoylchitosans and their chiroptical properties in dilute solutions

Two benzoyl substituted chitosan derivatives, 3,6‐O‐dibenzoylchitosan (DBC) and 2‐N‐3,6‐O‐tribenzoylchitosan (TBC), were prepared, and their optical activities in organic solvent were investigated by circular dichroism (CD). For TBC, two splitting bands (a negative one at 288 nm and a positive one at 274 nm) corresponding to the ¹L_b transition of the benzoyl group were observed in chloroform and dichloromethane, while only a negative CD band was recorded in N, N‐dimethylformamide (DMF). These results indicated that the transition moments of benzoyl groups were orderly arranged along the helical polymer chain when TBC was dissolved in a solvent with low polarity, but the same ordered structure did not appear in a polar solvent of DMF. For DBC, only negative CD signals corresponding to the ¹L_b transition of the benzoyl group were observed, regardless of the solvent property, which indicated that the chromophores were not arranged in an ordered fashion with appropriate geometry to interact with one another to induce bi‐signate CD signals. Adding methanol or DMF to the solution of TBC/chloroform resulted in a progressive decrease of the intensity of the positive split band at 274 nm. The intensity of the positive band was weakened upon heating a solution of TBC/chloroform from 20 to 60 °C. The results suggested that the ordered arrangement of the chromophores in the TBC system was dependent on solvent and sensitive to temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4107–4115, 2004     

Metallization of U3O8via catalytic electrochemical reduction with Li2O in LiCl molten salt

The concept of a novel electrochemical reduction process for the treatment of spent nuclear fuels in Li₂O-LiCl molten salt was proposed and fresh tests using U₃O₈ powder were carried out to elucidate the reaction mechanism and verify the feasibility of the process. Electrolysis of Li₂O and reduction of U₃O₈ powder took place simultaneously at the cathode part of the electrolysis cell via a catalytic EC mechanism and the conversion of U₃O₈ to U metal was more than 99%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Speed of adaptation in structured populations

Adaptation of populations takes place with the occurrence and subsequent fixation of mutations that confer some selective advantage to the individuals which acquire it. For this reason, the study of the process of fixation of advantageous mutations has a long history in the population genetics literature. Particularly, the previous investigations aimed to find out the main evolutionary forces affecting the strength of natural selection in the populations. In the current work, we investigate the dynamics of fixation of beneficial mutations in a subdivided population. The subpopulations (demes) can exchange migrants among their neighbors, in a migration network which is assumed to have either a random graph or a scale-free topology. We have observed that the migration rate drastically affects the dynamics of mutation fixation, despite of the fact that the probability of fixation is invariant on the migration rate, accordingly to Maruyama's conjecture. In addition, we have noticed a topological dependence of the adaptive evolution of the population when clonal interference becomes effective.     

The calculation of neutron self-shielding factors of a group of isolated resonances

The resonance neutron self-shielding factor, G _res, is required in neutron metrology and activation data analysis. In a previous paper, the authors have shown that a dimensionless variable can be introduced which converts the dependence of G _res on the physical and nuclear properties of the material samples into an universal curve, valid for the isolated resonances of any nuclide. This work presents a methodology based on the universal curve, which enables to calculate G _res for a group of isolated resonances by weighting its individual contributions. A good agreement was reached with results calculated by the MCNP code and with experimental values for Mo foils and wires. This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental analysis of current and deformation of ion-exchange polymer metal composite actuators

In this paper we describe the experimental analysis of a novel ion-exchange polymer metal composite (IPMC) actuator under large external voltage. The experimental analysis is supplemented with a coupled thermodynamic model, which includes mass transport across the thickness of the polymer actuator, chemical reactions at boundaries, and deformation as a function of the solvent (water) distribution. In this paper, the case of large electrode potentials (over 1.2 V) has been analyzed experimentally and theoretically. At these voltage levels, electrochemical reactions take place at both electrodes. These are used in the framework of overpotential theory to develop boundary conditions for the water transport in the bulk of polymer. The model is then simplified to a three-component system comprised of a fixed negatively charged polymeric matrix, protons, and free water molecules within the polymer matrix. Among these species, water molecules are considered to be the dominant species responsible for the deformation of the IPMC actuators. Experiments conducted at different initial water contents are described and discussed in the context of the proposed deformation mechanism. Comparison of numerical simulations with experimental data shows good agreement.     

Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

Infrared and Raman spectroscopic investigation of Eu3+-doped mono and Di-urethanesil hybrid siliceous materials

The general features of two series of sol-gel derived materials, designatedurethanesils (Ut), have been investigated by infrared and Raman spectroscopies with the goal of elucidating the chemical environment of the Eu³⁺ cations. The host frameworks of the two families of ormolytes studied have been represented by m-Ut(350) and d-Ut(300), where m stands for mono, d stands for di, 350 and 300 are the average molecular weights of the organic precursors (poly(ethylene glycol) methyl ether, PEGME, and poly(ethylene glycol), PEG, respectively). The hybrid matrix of the mono-xerogels is composed by a siliceous backbone bonded by means of urethane linkages (-NHC (=O)O-) to pendant methyl end capped oligopolymer chains with approximately 7 oxyethylene units, whereas that of the di-xerogels is based on a siliceous network grafted through urethane groups to both ends of poly(oxyethylene) segments containing about 6 (OCH₂CH₂) repeat units. Both classes of materials have been doped with europium triflate (Eu(CF₃SO₃)₃). The doped samples have been identified by m-Ut(350)_nEu(CF₃SO₃)₃ and d-Ut(300)_nEu(CF₃SO₃), where n is the molar ratio of (OCH₂CH₂) repeat units per Eu³⁺ ion. Materials with n ranging from ∞ to 5 have been analyzed. The spectral data obtained provide evidence that the cations begin to coordinate to the ether oxygen atoms of the oligopolymer chains at n=40 in the mono-urethanesils and at n=10 in the di-urethanesils. In mono-urethanesils samples with n>40 and in di-urethanesils materials with n>10, the Eu³⁺ coordinate exclusively to the carbonyl oxygen atoms of the urethane linkages. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.