Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

Increase of both order and disorder in the first hydration shell with increasing solute polarity

Monte?Carlo simulations of a small model solute in an aqueous solution are used to examine the effects of solute polarity on hydration structure. A judicious definition of the orientational order parameter leads to reinterpretation of the conventional picture of hydration. As the solute varies from hydrophobic to hydrophilic the ordered first shell water simultaneously fractionates into a more highly ordered and a more disordered component. The hydrogen-bond network rearranges such that the more ordered component relaxes to configurations of optimal intermolecular angles, the other fraction being released from the network.     

Optical pressure sensors for high-pressure–high-temperature studies in a diamond anvil cell

We review the various optical pressure sensors that are suitable for high-pressure and high-temperature studies in a diamond anvil cell. Two different kinds of sensors are considered: those based on the pressure shift of a fluorescence line (ruby, SrB₄O₇:Sm²⁺) and those based on the pressure shift of a Raman line (c-BN, diamond). The calibration of those sensors are presented in detail, and discussion is made on their useful pressure and temperature ranges.     

Thermoelastic behaviour of hexagonal graphite-like boron nitride

Abstract

A synchrotron X-ray diffraction study on hexagonal graphite-like boron nitride (h-BN) was performed under high pressures and temperatures. From the measured P-V-Trelation for h-BN (with a three-dimensional ordering parameter P₃ = 0.9) in the temperature range from 298 to 1273 K and up to 6.7 GPa, the thermoelastic parameters are derived by fitting a modified high temperature Birch-Murnaghan equation of state. The results are: bulk modulus B₀[GPa] = 27.6-0.0081(T[K]-298) and its pressure derivative B¹ = 10.5 + 0.0016(T [K] - 298). These values are for samples with P₃ = 0.9 and are quite different for samples with different values of the order parameter. This parameter is shown to have a leading role in the determination of the thermoelastic properties of h-BN, which explains and reconciles the differences between previous results.     

X-ray absorption study of Cu,Zn SOD under high pressure

Abstract

We have investigated Cu, Zn Superoxide Dismutase (Cu, Zn SOD) metal sites at high pressure using X-ray absorption. XAS (X-ray Absorption Spectroscopy) gives information on local structure and it is particularly suited to metal site investigation. To the best of our knowledge, this is the first time that protein conformational states have been investigated using the high pressure XAS technique. Cu, Zn SOD catalyses the dismutation of toxic oxygen radicals produced in cells; this reaction occurs at the copper metal site. Structural changes around the copper, induced by pressure, can be directly related to protein substates. Their characterisation is thus important in the understanding of protein activity.

The high-pressure device was a Paris-Edinburgh large volume cell.

Experiments were performed on lyophilised Cu, Zn SOD between 0 and 48 kbar at the copper and zinc K-edges. The two metal local atomic environments have a different behaviour as pressure increases: copper exhibits a more flexible environment; on the contrary, zinc shows small structural modifications. We have identified a state, formed between 3 and 8 kbar, which is stable up to 48 kbar.     

Solid-state synthesis of boron subnitride, B6N: myth or reality?

Solid-state synthesis of boron subnitride, B₆N, as a result of chemical interaction between boron and boron nitride at 7.5 GPa and 1700 °C has been previously reported by Hubert et al. However, a critical analysis of the results has shown that the evidence for the formation of boron subnitride with B₆O-like structure is inconclusive. We have studied in situ the interaction between boron and BN at the same p–T conditions using X-ray diffraction with synchrotron radiation. At 7.4 GPa and 1700 °C the formation of a new phase has not been observed. At the same time, HP–HT treatment has resulted in strong and unpredictable preferred orientation of boron crystallites. This leads to the rise of some weak boron reflections that might be erroneously attributed to the appearance of a new phase. To cite this article: V.L. Solozhenko et al., C. R. Chimie 9 (2006).     

From Bacteria to Mollusks: The Principles Underlying the Biomineralization of Iron Oxide Materials

Various organisms possess a genetic program that enables the controlled formation of a mineral, a process termed biomineralization. The variety of biological material architectures is mind‐boggling and arises from the ability of organisms to exert control over crystal nucleation and growth. The structure and composition of biominerals equip biomineralizing organisms with properties and functionalities that abiotically formed materials, made of the same mineral, usually lack. Therefore, elucidating the mechanisms underlying biomineralization and morphogenesis is of interdisciplinary interest to extract design principles that will enable the biomimetic formation of functional materials with similar capabilities. Herein, we summarize what is known about iron oxides formed by bacteria and mollusks for their magnetic and mechanical properties. We describe the chemical and biological machineries that are involved in controlling mineral precipitation and organization and show how these organisms are able to form highly complex structures under physiological conditions.     

Compact multianvil device for in situ studies at high pressures and temperatures

We describe a recently developed device for in situ studies at pressures up to 25 GPa and temperatures up to 2300 K. The system consists of a 450 ton V7 Paris-Edinburgh press combined with a Stony Brook ‘T-cup’ multianvil stage. Such a compact large-volume set-up has a total mass of 100 kg only and can be readily used on most synchrotron radiation facilities. The optimization of the set-up by off-line tests is detailed, and we present some X-ray diffraction results which demonstrate the potential of the technique.