Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

Influence of the reaction temperature and ph on the coordination modes of the 1,4-benzenedicarboxylate (BDC) ligand: a case study of the Ni(II)(BDC)/2,2'-bipyridine system

Three new Ni(BDC)/2,2'-bipy compounds, Ni2(BDC)(HBDC)2(2,2'-bipy)2 (2), Ni3(BDC)3(2,2'-bipy)2 (3), and Ni(BDC)(2,2-bipy)2.2H2O (5), in addition to the previously reported Ni(BDC)(2,2'-bipy).0.75H2BDC (1) and Ni(BDC)(2,2'-bipy)(H2O) (4) [BDC = 1,4-benzenedicarboxylate; 2,2'-bipy = 2,2'-bipyridine], have been synthesized by hydrothermal reactions. A systematic investigation of the effect of the reaction temperature and pH resulted in a series of compounds with different compositions and dimensionality. The diverse product slate illustrates the marked sensitivity of the structural chemistry of polycarboxylate aromatic ligands to synthesis conditions. Compound 1, which has a channel structure containing guest H2BDC molecules, is formed at the lowest pH. The guest H2BDC molecules are connected by hydrogen bonds and form extended chains. At a slightly higher pH, a dimeric molecular compound 2 is formed with a lower number of protonated carboxylate groups per nickel atom and per BDC ligand. Reactions at higher temperature and the same pH lead to the transformation of 1 and 2 into the two-dimensional, layered trinuclear compound 3. As the pH is increased, a one-dimensional polymer 4 is formed with a water molecule coordinated to Ni2+. Bis-monodentate and bischelating BDC ligands alternate along the chain to give a crankshaft rather than a regular zigzag arrangement. A further increase of the pH leads to the one-dimensional chain compound 5, which has two chelating 2,2'-bipy ligands. Crystal data: 2, triclinic, space group P, a = 7.4896(9) angstroms, b = 9.912(1) angstroms, c = 13.508(2) angstroms, alpha = 86.390(2) degrees , beta = 75.825(2) degrees, gamma = 79.612(2) degrees, Z = 2; 3, orthorhombic, space group Pbca, a = 9.626(2) angstroms, b = 17.980(3) angstroms, c = 25.131(5) angstroms, Z = 4; 5, orthorhombic, space group Pbcn, a = 14.266(2) angstroms, b = 10.692(2) angstroms, c = 17.171(2) angstroms, Z = 8.     

Do solid surface potential barriers retard convoy peak electrons?

Using a coaxial cylindric electron spectrometer and an electrostatic ion energy analyzer in tandem, a direct measurement of the difference of the energy of convoy peak electron and the electron equivalent ion energy of protons emerging from the downstream surface of C, Au and Al foils is performed in the proton energy range from 60 to 250 keV. This measurement is made possible using the accepted evidence that for a gas target these energies are equal. It is found that also for the beam foil convoy peak electrons, within an experimental average uncertainty of about ±0.1 eV, there is no difference between these energies. If one accepts that the origin of convoy electrons is from inside the solid, the conclusion is that no retardation by the solid surface potential barrier, which is of the order of a few eV, is observed. This is attributed to the strong electron-ion Coulomb interaction which almost completely overshadows the force exerted on the electron by the field of the surface barrier.     

Effect of Mobile Phase pH* on Chromatographic Behaviour in Chiral Ligand-Exchange Thin-Layer Chromatography (CLETLC) of Amino Acid Enantiomers

The enantiomers of some amino acids have been separated on commercial chiral TLC plates in reversed-phase mode. The effect of the pH* of the aqueous-organic mobile phase on the retention and mobility of the enantiomers and on selectivity was investigated. It was shown that for most of the amino acids investigated the highest enantioselectivity was obtained at pH* 3–4 or 6–7. The drift and disturbance of the baseline on the chromatograms were also much smaller at pH* 3–4 and 6–7.     

Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

A study of the composition and properties of the ion-association complex of Rhodamine B with silicomolybdic acid, with a view to its analytical application

The composition of the ion-association complex of Rhodamine B with silicomolybdate has been examined by Job's method and spectrophotometric titration. The ratio of Rhodamine B to silicon in the complex is 4 : 1. The same ratio is obtained by analysis of the crystalline complex. The composition of the complex is identical in aqueous medium, an organic solvent (ethanol) and in the crystalline state (C(28)H(30)N(2)O(3))(4)SiMo(12)O(40)). The complex is stable in the organic solvent and has its absorption maximum at 555 nm and a molar absorptivity of 5 x 10(5) 1.mole(-1)cm(-1). The complex can be advantageously used for the determination of silicon.