Determination of organochlorine pesticides (OCPs) in breast milk from Rio Grande do Sul,Brazil, using a modified QuEChERS method and gas chromatography-negative chemical ionisation-mass spectrometry

ABSTRACT

The food chain is the main source of exposure to humans by organochlorine pesticides (OCPs) due to the bioaccumulation. Breast milk can accumulate OCPs, so this matrix is often used as an environmental bioindicator. The currently available methods for the determination of several OCPs and metabolites in breast milk involve, in general, multi-step sample preparation and quantification techniques with low selectivity, high cost and much time and labour. Thus, a fast and efficient method based on sample preparation using the quick, easy, cheap, effective, rugged and safe (QuEChERS) method combined with gas chromatography coupled to mass spectrometry with negative chemical ionisation (GC-NCI-MS) was developed, validated and applied for determination of 16 OCPs and metabolites in breast milk samples. The extract was cleaned by dispersive solid-phase extraction (d-SPE) using MgSO₄ and C18, evaporated in a Turbovap® system, redissolved and analysed by GC-NCI-MS. The method was validated showing acceptable recoveries (72–118%) and precision (RSD <19%). Method limits of detection (LODs) and quantification (LOQs) ranged from 0.75 to 7.5 ng g^?1 and from 2.5 to 25 ng g^?1 lipid, respectively. The method was successfully applied to 20 samples of breast milk from different regions of the Rio Grande do Sul state, Brazil, of which 75% contained residues below the LOQs.     

Highly sensitive ion preconcentration method based on flow sorbent extraction using multiwall carbon nanotubes

In this work a solid phase on-line uranium ion preconcentration system coupled with spectrophotometry has been developed. The method is based on uranyl ion preconcentration at pH 3.75 onto multiwall carbon nanotubes treated with HNO₃. After preconcentration, the uranyl ions are eluted with 0.32?mol?L^?1HCl followed by reaction with 3,6-bis[(2-arsonophenyl)-azo]-4,5-dihydroxy-2,7-naphthalendisulfonic acid 0.08%[w/v] (Arsenazo III), which had maximum monitored absorbance of 650?nm. Effects of the pertinent experimental parameters on the system were investigated by means of 2^6?2 fractional factorial design, while optimization was carried out using the Doehlert matrix. Under optimized conditions, detection and quantification limits were found to be 0.21 and 0.7?µg?L^?1, respectively. The analytical curve ranged from 5 to 150?µg?L^?1 (r?=?0.998), while the relative standard deviations (RSD) were 3.27 and 2.56% for the respective uranium concentrations of 10 and 100?µg?L^?1 (n?=?10). The features obtained for the on-line preconcentration system were: preconcentration factor of 228, concentration efficiency of 57?min^?1, consumption index of 0.13?mL and sample throughput of 15?h^?1. In order to assess the accuracy of the proposed method, addition and recovery studies were carried out on spring water samples from different sources and synthetic seawater with satisfactory results ranging from 94.85 up to 103.65%.     

The Influence of Hydrogen Loading Temperature on the Mechanical Strength of Optical Fibers

The influence of hydrogen loading temperature on the mechanical strength of optical fibers is investigated. Fibers subjected to high-pressure hydrogen loading at different temperatures were submitted to bend tests, and the results compared with those for pristine fibers. The Weibull probability distribution function was used to analyze the data of the mechanical bending strength of the fibers. Fiber strength is reduced by the presence of hydrogen, and this decrease is greater for higher hydrogen loading temperatures. The mechanical properties of the polymers used to coat fibers are affected by the hydrogen loading process and also by the increase in temperature. However, there is no evidence of cracks formation that might allow water to penetrate to the surface of the glass. Observation using scanning electron microscopy revealed that the morphology of fractures in nonhydrogen-loaded fibers have distinct fracture characteristics to that of fibers that are hydrogen loaded at 90°C and 120°C.     

Non-oxo vanadium(IV) alkoxide chemistry: solid state structures, aggregation equilibria and thermochromic behaviour in solution

The reversible thermochromic behaviour of homoleptic [{V(OR)(4)}(n)] complexes in solution [R = Pr(i) (product I), Bu(s) (B(s)), Nep (N) and Cy (C)] is accounted for the existence of an aggregation equilibrium involving dimeric and monomeric species in which vanadium(iv) is respectively five- and four-coordinate. Bulky R groups such as Bu(t) and Pe(t) (tert-pentoxide) prevent aggregation and therefore give rise to exclusively mononuclear compounds (B(t) and P(t), respectively) that are not thermochromic. The complexes and their temperature-dependent interconversion were characterised by single crystal X-ray diffractometry, magnetic susceptibility measurements and electronic, FTIR and EPR spectroscopies in a wide temperature range. Equilibrium constants and enthalpy and entropy changes for the dimerization reactions have been determined and compared with literature data.     

Antimicrobial activities of indole alkaloids from Tabernaemontana catharinensis

Tabernaemontana catharinensis root bark ethanol extract, EB2 fraction and the MMV alkaloid (12-methoxy-4-methylvoachalotine) were evaluated for their antimicrobial activities. T. catharinensis ethanol extract was effective against both strains of the dermatophyte Trichophyton rubrum at concentrations of 2.5 mg/mL (wild strain) and 1.25 mg/mL (mutant strain), while the EB2 fraction and MMV alkaloid showed a strong antifungal activity against wild and mutant strains with MIC values of <0.02 and 0.16 mg/mL, respectively. The EB2 fraction showed a strong antibacterial activity against ATCC strains of S. aureus, S. epidermidis, E. coli and P. aeruginosa with MICs from <0.02 to 0.04 mg/mL, as well as against resistant clinical isolates species of Enterococcus sp, Klebsiella oxytoca, Citrobacter, K. pneumoniae, P. mirabilis, S. aureus, S. epidermidis, E. coli and P. aeruginosa with MIC values ranging from 0.04 to 0.08 mg/mL. The MMV alkaloid presented a MIC of 0.16 mg/mL against the strains of S. aureus and E. coli ATCC. For the resistant clinical isolates Enterococcus sp, Citrobacter, S. aureus, S. epidermidis, E. coli and P. aeruginosa the MIC of MMV ranged from 0.08 to 0.31 mg/mL. The chromatography analysis of the EB2 fraction revealed the presence of indole alkaloids, including MMV, possibly responsible for the observed antimicrobial activity.     

Experimental microkinetic approach of the photocatalytic oxidation of isopropyl alcohol on TiO2. Part 1. Surface elementary steps involving gaseous and adsorbed C3H(x)O species

The present study concerns an experimental microkinetic approach of the photocatalytic oxidation (PCO) of isopropyl alcohol (IPA) into acetone on a pure anatase TiO2 solid according to a procedure previously developed. Mainly, the kinetic parameters of each surface elementary step of a plausible kinetic model of PCO of IPA are experimentally determined: natures and amounts of the adsorbed species and rate constants (preexponential factor and activation energy). The kinetics parameters are obtained by using experiments in the transient regime with either a FTIR or a mass spectrometer as a detector. The deep oxidation (CO2 and H2O formation) of low concentrations of organic pollutants in air is one of the interests of the PCO. For IPA, literature data strongly suggest that acetone is the single route to CO2 and H2O and this explains that the present study is dedicated to the elementary steps involving gaseous and adsorbed C3H(x)O species. The microkinetic study shows that strongly adsorbed IPA species (two species denoted nd-IPA(sads) and d-IPA(sads) due to non- and dissociative chemisorption of IPA, respectively) are involved in the PCO of IPA. A strong competitive chemisorption between IPA(sads) and a strongly adsorbed acetone species controls the high selectivity in acetone of the PCO at a high coverage of the surface by IPA(sads). The kinetic parameters of the elementary steps determined in the present study are used in part 2 to provide a modeling of macroscopic kinetic data such as the turnover frequency (TOF in s(-1)) of the PCO using IPA/O2 gas mixtures.     

A fully coupled 3-D mixed finite element model of Biot consolidation

The numerical solution to the Biot equations of 3-D consolidation is still a challenging task because of the ill-conditioning of the resulting algebraic system and the instabilities that may affect the pore pressure solution. Recently new approaches have been advanced based on mixed formulations. In the present paper a fully coupled 3-D mixed finite element model is developed with the aim at alleviating the pore pressure numerical oscillations at the interface between materials with different permeabilities. A solution algorithm is implemented that takes advantage of the block structure of the discretized problem. The proposed model is verified against well-known analytical solutions and successfully experimented with in realistic applications of soil consolidation.     

Propanediol (and) Caprylic Acid (and) Xylitol as a New Single Topical Active Ingredient against Acne: In Vitro and In Vivo Efficacy Assays

In addition to dermatological complications, acne can affect the quality of life of individuals in numerous ways, such as employment, social habits and body dissatisfaction. According to our expertise, caprylic acid and propanediol would not have a direct action on Cutibacterium acnes. Despite this, we investigated the existence of a synergistic effect among xylitol, caprylic acid and propanediol as a mixture of compounds representing a single topical active ingredient that could benefit the treatment against acne. In vitro and in vivo assays were performed to challenge and to prove the efficacy of propanediol, xylitol and caprylic acid (PXCA) against acne. PXCA had its MIC challenged against C. acnes (formerly Propionibacterium acnes) and Staphylococcus aureus, resulting in concentrations of 0.125% and 0.25%, respectively, and it also developed antimicrobial activity against C. acnes (time-kill test). PXCA was able to reduce the 5-alpha reductase expression in 24% (p < 0.01) in comparison with the testosterone group. By the end of 28 days of treatment, the compound reduced the skin oiliness, porphyrin amount and the quantity of inflammatory lesions in participants. According to the dermatologist evaluation, PXCA improved the skin’s general appearance, acne presence and size.     

Experimental microkinetic approach of the photocatalytic oxidation of isopropyl alcohol on TiO2. Part 2. from the surface elementary steps to the rates of oxidation of the C3H(x)O species

The present study concerns an experimental microkinetic approach of the photocatalytic oxidation (PCO) of isopropyl alcohol (IPA) into acetone on a pure anatase TiO2 solid according to a procedure previously developed. Mainly, the kinetic parameters of each surface elementary step of a plausible kinetic model of the PCO of IPA are experimentally determined: natures and amounts of the adsorbed species and rate constants (preexponential factors and activation energies). These kinetic parameters are used to evaluate a priori the catalytic activity (turnover frequency, TOF, in s(-1)) of the solid that is compared to the experimental value. The kinetics parameters are obtained by using experiments in the transient regime with either a FTIR or a mass spectrometer as a detector. The microkinetic study shows that only strongly adsorbed IPA species (two species denoted nd-IPA(sads) and d-IPA(sads) due to non- and dissociative chemisorption of IPA respectively) are involved in the PCO of IPA. A strong competitive chemisorption between IPA(sads) and a strongly adsorbed acetone species controls the high selectivity in acetone of the PCO at a high coverage of the surface by IPA(sads). The apparent rate constant (1.4 10(-3) s(-1)) of the Langmuir-Hinshelwood elementary step between IPA(sads) and the active oxygen containing species generated by the UV irradiation provides the TOF of the PCO for IPA/O2 gas mixtures. The kinetic parameters of the elementary steps determined by the experimental microkinetic approach allow us to provide a reasonable simulation of the experimental data (coverages of the adsorbed species and partial pressures of the gases of interest) recorded during a static PCO of IPA(sads) species.     

Isolation and single crystal study of [Nb2(μ-OMe)2(OiPr)8]. Can alcohol interchange provide the homoleptic niobium isopropoxide?

Niobium isopropoxide, Nb(OⁱPr)₅, is an attractive precursor of simple and complex niobium oxides in sol-gel technology. This compound cannot, unfortunately, be obtained by alcohol interchange starting from linear chain homologues such as Nb(OMe)₅ or Nb(OEt)₅. The equilibrium in the latter reaction favours formation of mixed-ligand complexes, [Nb₂(OR)₂(OⁱPr)₈], R = Me, Et. In particular, [Nb₂(OMe)₂(OPrⁱ)₈] (1) has been isolated in high yield from repeated treatment of Nb₂(OMe)₁₀ with excess of isopropanol. The X-ray single crystal study reveals a dinuclear structure containing a pair of edge-sharing octahedra with methoxide ligands in the bridging position. Infrared (IR) and mass spectroscopy (MS) studies confirmed the incomplete ligand substitution. The ¹H-NMR spectra suggest equilibrium between different molecular forms in solution. Solvothermal interaction of 1 with La chips in toluene/isopropanol media results in formation of a mixture of LaNb₂(OⁱPr)₁₃ and La₂Nb₄(μ₄−O)₄(OH)₂(μ−OⁱPr)₈(OⁱPr)₈ (2). Electronic Supplementary Material The online version of this article (doi: ) contains supplementary material, which is available to authorised users.