Microwave-accelerated Claisen rearrangements of allyl tetronates and tetramates

[3,3]-Sigmatropic rearrangements of allyl tetronates and allyl tetramates to give 3-allyltetronic or -tetramic acids, respectively, proceed within 20-60 min under microwave irradiation (300 W, 130-190 °C). Consecutive (homo)sigmatropic [1,5] H-shifts such as oxa-ene reactions are promoted less effectively, which allows the isolation of Claisen intermediates of sigmatropic domino sequences, in contrast to conventional heating.     

Microwave‐assisted nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐lH‐pyrazolo[ 1,2‐a]pyrazol‐4‐ylium‐3‐olate to α‐phenylmalonamides

Three α‐phenylmalonamides have been prepared by the selective nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐1H‐pyrazolo[1,2‐a]pyrazol‐4‐ylium‐3‐olate in solventless microwave syntheses. The three weak nucleophiles employed were aniline, p‐chloroaniline and m‐toluidine. The α‐phenylmalonamides of these three aniline derivatives could not be prepared using the previously reported solvent syntheses via 3‐oxopyrazolo[1,2‐a]pyrazol‐8‐ylium‐1‐olates. All products were characterised using, infrared spectroscopy, ¹H nmr and electrospray mass spectrometry. The single crystal X‐ray structures of the starting pyrazolo‐[1,2‐a]pyrazole and α‐phenylmalon‐m‐toluidide are also reported.     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

Formation of the unusual alkynyl carboxamide complex, C2H5N(H)C(O)CC[Co2(CO)6]CCo3(CO)9

The reaction of the cluster complex HCC[Co₂(CO)₆]CCo₃(CO)₉ with (or without) BrCCo₃(CO)₉ under Cadiot-Chodkiewicz coupling conditions gave the unusual alkynyl carboxamide complex C₂H₅N(H)C(O)CC[Co₂(CO)₆]CCo₃(CO)₉ rather than a coupled product containing two tricobalt cluster units. Steric demands imposed by the Co₃ cluster allow attack at the least hindered alkyne carbon and stabilise the formed ynamine, so allowing subsequent CO insertion. The product has been characterised by X-ray crystallography.     

A study of the static yield stress in a binary Lennard-Jones glass

The stress-strain relations and the yield behavior of a model glass (a 80:20 binary Lennard-Jones mixture) is studied by means of molecular dynamics simulations. In a previous paper it was shown that, at temperatures below the glass transition temperature, Tg, the model exhibits shear banding under imposed shear. It was also suggested that this behavior is closely related to the existence of a (static) yield stress (under applied stress, the system does not flow until the stress sigma exceeds a threshold value sigmay). A thorough analysis of the static yield stress is presented via simulations under imposed stress. Furthermore, using steady shear simulations, the effect of physical aging, shear rate and temperature on the stress-strain relation is investigated. In particular, we find that the stress at the yield point (the "peak"-value of the stress-strain curve) exhibits a logarithmic dependence both on the imposed shear rate and on the "age" of the system in qualitative agreement with experiments on amorphous polymers, and on metallic glasses. In addition to the very observation of the yield stress which is an important feature seen in experiments on complex systems like pastes, dense colloidal suspensions and foams, further links between our model and soft glassy materials are found. An example is the existence of hysteresis loops in the system response to a varying imposed stress. Finally, we measure the static yield stress for our model and study its dependence on temperature. We find that for temperatures far below the mode coupling critical temperature of the model (Tc = 0.435 in Lennard-Jones units), sigmay decreases slowly upon heating followed by a stronger decrease as Tc is approached. We discuss the reliability of results on the static yield stress and give a criterion for its validity in terms of the time scales relevant to the problem.     

Error estimates in the determination of rigid body displacements in protein crystals

We report the estimation of random errors in the refinement of the rigid body displacements of the -helices of the enzyme 6-phosphogluconate dehydrogenase. Least-squares refinement of the TLS parameters of the helices has been carried out using X-ray reflection data of 2.1 Å resolution, resulting in anR-factor of 19.5%. Standard deviations were estimated from the normal matrix. The results show that the translational mean-square displacements of nearly all the helices are significant at this resolution. However the libration parameters are only significant when the helices have at least four turns. Screw-rotation tensor values cannot be determined at this resolution.     

微芯片电泳与电感耦合等离子体质谱的连接技术研究

研究了基于微芯片电泳分离和电感耦合等离子体质谱的连接技术,并对不同形态的Cu和As进行了快速分离和检测.     

Synthesis and properties of new ditertiary stibines based upon o-, m- or p-xylyl and m- or p-phenylene backbones and their complexes with tungsten, iron and nickel carbonyls

High yield syntheses for 1,2-, 1,3-, and 1,4-xylyl distibines (1,2-C6H4(CH2SbMe2)2, 1,3-C6H4(CH2SbMe2)2, 1,4-C6H4(CH2SbMe2)2, respectively) from Me2SbCl (conveniently made in situ from Me2PhSb and HClgas) and the appropriate di-Grignard are reported. The 1,3- and 1,4-phenylene distibines, 1,3-C6H4(SbMe2)2 and 1,4-C6H4(SbMe2)2, were made similarly. The new ligands have been characterised by mass spectrometry, 1H and 13C[1H] NMR spectroscopy, and by the preparation of methiodide derivatives. The crystal structures of 1,4-C6H4(CH2SbMe2)2 and [1,3-C6H4(CH2SbMe3)2]I2 have been determined. The synthesis of 1,2-C6H4(CH2SbPh2)2 has been achieved similarly in modest yield and the distibine converted into the tetra-iodo-derivative 1,2-C6H4(CH2SbPh2I2)2. The coordination modes available to these ligands have been probed by the synthesis and characterisation of complexes with nickel, iron and tungsten carbonyls. The crystal structure of [[Fe(CO)4]2[micro-1,3-C6H4(CH2SbMe2)2]] has been determined. The spectroscopic properties of these carbonyl derivatives have been compared with those of complexes of other antimony ligands, and in some cases with diphosphine and diarsine complexes, to probe the electronic properties of the new ligands.