Chemoenzymatic synthesis of conduritol analogues

Several conduritol and conduramine analogues have been synthesized from β-substituted naphthalenes via a chemoenzymatic approach, in a high regio- and stereocontrolled way.     

Determination of the substituent effect on the O-H bond dissociation enthalpies of phenolic antioxidants by the EPR radical equilibration technique

The bond dissociation enthalpies (BDE) of several phenols containing electron-withdrawing substituents in the para position have been determined by means of the EPR radical equilibration technique. It has been found that CN, NO(2), CHO, COOR, and COOH induce an increase of the BDE value of the O-H bond, thus producing a worsening of the antioxidant activity of phenols, while Cl, Ph, and CH[double bond]CHPh show an opposite effect. The contributions of these substituents for the calculation of the BDE values in polysubstituted phenols by using the group additivity rule have also been derived. It is shown that this rule provides quite reliable predictions of bond strengths, so that the method can be conveniently used to estimate new data on substituted phenols.     

Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

Mercury extraction by ionic liquids: temperature and alkyl chain length effect

The preliminary results described here show the complete transfer of Hg(II) ions, in the absence of a chelating agent in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids; the lag time required to gain the quantitative metal ion partition turned out to be strongly dependent both on alkyl chain length on the imidazolium ring and on the working temperature.     

Reactions of Substituted Boryl Radicals with Nitroalkanes. EPR, Kinetic, and Product Studies

The radical-initiated reaction of amine-boranes and phosphine-boranes, LBH(3) (L = R(3)N, R(3)P) with aliphatic nitro compounds has been investigated in order to explore the possibility of reducing tertiary nitroalkanes to the corresponding hydrocarbons. In all the examined cases boroxy nitroxides, RN(O(*))OBLH(2), resulting from the addition of ligated boryl radicals, LBH(2)(*), to an oxygen atom of the nitro group were detected and characterized by EPR spectroscopy. This reaction occurs at room temperature with a rate constant of 1.5 x 10(7) M(-)(1) s(-)(1) for LBH(2)(*) = Me(3)NBH(2)(*) and RNO(2) = Me(3)CNO(2). The boroxy nitroxides from tertiary nitroalkanes decay by a fragmentation reaction occurring with cleavage of the nitrogen-oxygen bond, rather than of the carbon-nitrogen bond as would be required for the reduction to the corresponding alkane to take place. The Arrhenius parameters for this fragmentation have been determined in few cases.     

The synthesis and structure of bis(acetonitrile)nitrosyl tris(3,5-dimethylpyrazolyl)borato molybdenum hexafluorophosphate

Summary Treatment of [Mo{HB(3,5-Me₂C₃HN₂)₃}(NO)I₂] with one or two moles of AgPF₆ in acetonitrile afforded the paramagnetic (one unpaired electron) complex [Mo{HB(3,5-Me₂C₃NH₂)₃}(NO)(NCMe)₂][PF₆]. The structure of this complex was determined crystallographically, and the six-coordinate geometry of the complex cation confirmed.     

Spectrophotometric, EPR and kinetic characterisation of the >N-O* radical from 1-hydroxybenzotriazole, a key reactive species in mediated enzymatic oxidations

Characterisation of the aminoxyl (>N-O*) radical BTNO, generated from 1-hydroxybenzotriazole (HBT) by the one-electron oxidant CAN (a Ce(IV) salt), confirms BTNO as the reactive intermediate in oxidations run with the laccase/HBT system.     

Proton-coupled electron transfer of flavodoxin immobilized on nanostructured tin dioxide electrodes: thermodynamics versus kinetics control of protein redox function

In this paper, we report a spectroelectrochemical investigation of proton-coupled electron transfer in flavodoxin D. vulgaris Hildenborough (Fld). Poly-L-lysine is used to promote the binding of Fld to the nanocrystalline, mesoporous SnO(2) electrodes. Two reversible redox couples of the immobilized Fld are observed electrochemically and are assigned by spectroelectrochemistry to the quinone/semiquinone and semiquinone/hydroquinone couples of the protein's flavin mononucleotide (FMN) redox cofactor. Comparison with control data for free FMN indicates no contamination of the Fld data by dissociated FMN. The quinone/semiquinone and semiquinone/hydroquinone midpoint potentials (E(q/sq) and E(sq/hq)) at pH 7 were determined to be -340 and -585 mV vs Ag/AgCl, in good agreement with the literature. E(q/sq) exhibited a pH dependence of 51 mV/pH. The kinetics of these redox couples were studied using cyclic voltammetry, cyclic voltabsorptometry, and chronoabsorptometry. The semiquinone/quinone reoxidation is found to exhibit slow, potential-independent but pH-sensitive kinetics with a reoxidation rate constant varying from 1.56 s(-)(1) at pH 10 to 0.0074 s(-)(1) at pH 5. The slow kinetics are discussed in terms of a simple kinetics model and are assigned to the reoxidation process being rate limited by semiquinone deprotonation. It is proposed that this slow deprotonation step has the physiological benefit of preventing the undesirable loss of reducing equivalents which results from semiquinone oxidation to quinone.