Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.     

Solvent and temperature effects on the fluorescence and competitive photoreactions of cis-9-styrylanthracene

A fluorimetric and photochemical study of cis-9-styrylanthracene as a function of temperature has been carried out in different solvents with the aim of answering some open questions about the behavior of its first excited singlet state, S₁. In non-polar solvents, a parallel photoreactive pathway, leading to a cyclization adduct, was found to compete with fluorescence and isomerization already at 200 K, its contribution increasing markedly with temperature. The cis » trans photoisomerization occurs prevalently by a triplet mechanism, a detectable contribution of diabatic and adiabatic isomerization in S₁ being operative in these solvents from room temperature upwards. In polar solvents, the main deactivation pathway competitive with fluorescence is isomerization to trans, which occurs prevalently through a mixed singlet mechanism with a major diabatic and a minor adiabatic components.     

Template evaporation method for controlling anatase nanocrystal size in ordered macroporous TiO2

The importance of pure-phase titanium oxide materials as catalysts, sensors, and photonic band-gap materials has been growing steadily. Recently, more attention has been focused on nanostructured titanium oxide showing controlled and periodic porosity on a nanometric scale. The nanocrystal size control of porous nanostructured titanium oxide in an anatase form is a crucial step for the organic template method. Simple template removal by evaporation in an inert atmosphere is reported in this article and compared with the calcination technique usually reported in the literature. The proposed method allows the formation of a double-porous (macro and meso) anatase phase. We demonstrate that it highly preserves the macropore order into a titanium oxide material and induces narrowly dispersed mesopores by controlling the nano-crystal size that is kept around 6 nm. For the proposed method, polystyrene beads are particularly suitable as templates, being evaporated in the temperature range of anatase existence. The final high surface area makes the materials appealing for applications as photocatalysts or sensors.     

The aggregation of sodium dehydrocholate in water

 We used a battery of different methods to study the association in aqueous sodium dehydrocholate (NaDHC) solutions. This salt associates by a stepwise mechanism. Below (9.6 ± 4.2) × 10⁻⁴ mol dm⁻³ there is a molecular solution with some strongly insoluble dehydrocholic acid produced by hydrolysis. Between (9.6 ± 4.2) × 10⁻⁴ and (5.2 ± 2.2) × 10⁻³ mol dm⁻³, an aggregate similar to acid soap (NaDHC.HDHC) appears and its amount and the aggregate's size increase with concentration. At =(2.20 ± 0.85) × 10⁻² mol dm⁻³ the aggregates formed have properties usually associated with true micelles, such as solubilisation of water-insoluble dyes. These aggregates increase in size with concentration and change their shape at 8 × 10⁻² mol dm⁻³, giving nonsymmetrical aggregates. The changes in the solution physicochemical properties at these concentrations may be misinterpreted and this explains the different values of the critical micelle concentration reported in the literature for substances with similar structure, such as bile salts. Received: 14 May 2001 Accepted: 10 August 2001     

Conservative restoration of the Augustus Arch of Fano: cleaning methodology as derived from preparatory analyses and sampling

The original appearance of Augustus Arch of Fano was compromised by a diffuse distribution of black scales and other deposits. In order to preserve the stone surface the restoration intervention operated with different cleaning techniques so that it was possible to use every method with a properly and not dangerous intensity. In particular it showed the possibility to use laser cleaning to destroy the external hard part of black scales, and complete the intervention with light chemical cleaning. In the case of Augustus Arch this way resulted useful for preserve signs on surface and cleaning every kind of deposits at the same time. Every intervention on such an important monument need to obtain at the same time the best result for materials conservation and the aim of image restore.     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997