Smart Biopolymer-Based Nanocomposite Materials Containing pH-Sensing Colorimetric Indicators for Food Freshness Monitoring

Nanocomposite biopolymer materials containing colorimetric pH-responsive indicators were prepared from gelatin and chitosan nanofibers. Plant-based extracts from barberry and saffron, which both contained anthocyanins, were used as pH indicators. Incorporation of the anthocyanins into the biopolymer films increased their mechanical, water-barrier, and light-screening properties. Infrared spectroscopy and scanning electron microscopy analysis indicated that a uniform biopolymer matrix was formed, with the anthocyanins distributed evenly throughout them. The anthocyanins in the composite films changed color in response to alterations in pH or ammonia gas levels, which was used to monitor changes in the freshness of packaged fish during storage. The anthocyanins also exhibited antioxidant and antimicrobial activity, which meant that they could also be used to slow down the degradation of the fish. Thus, natural anthocyanins could be used as both freshness indicators and preservatives in biopolymer-based nanocomposite packaging materials. These novel materials may therefore be useful alternatives to synthetic plastics for some food packaging applications, thereby improving the environmental friendliness and sustainability of the food supply.     

Design and optimization of high-performance microring-based uni-traveling carrier photodiode for WDM optical systems

This paper presents the design principles of a novel optimized microring-based uni-traveling carrier photodiode (MR-UTC-PD), for wavelength division multiplexing (WDM) optical systems. The fundamental parameters for output characteristics such as quantum efficiency and 3-dB bandwidth of MR-UTC-PD are discussed. We analyze the effects of basic parameters as effective ring radius, definite coupling condition and the suitable cross section on the MR-UTC-PD main characteristics for high performance of the device. It is shown that the maximum quantum efficiency and most efficient performance of the device can be obtained at critical coupling condition. We show that the maximum 3-dB bandwidth and an efficient approach for high bandwidth-efficiency product can be achieved at overcoupling condition. In this regard, some design curves are presented for the optimized MR-UTC-PD.     

Highly Efficient Solvent-Free Synthesis of Dihydropyrimidinones Catalyzed by Zinc Oxide

A simple, efficient and practical procedure for the Biginelli reaction using zinc oxid (ZnO) as a novel and reusable catalyst is described under solvent-free conditions in high yields. The use of this agent is characterized by remarkable reactivity, moderate costs, low toxicity and simple work up procedures.     

Enantioselective Diethylzinc Addition to Aromatic Aldehydes Catalyzed by Novel Ti(IV) Complex of Three-Dentate Chiral Sulfonamide Ligands

The synthesis of several novel three-dentate sulfonamide alcohol ligands is described, starting from camphorsulfonyl chloride. The influence of temperature and ligand structure on the asymmetric addition of dietylzinc to aromatic aldehydes has been studied. Enantioselectivities up to 76% have been obtained.     

Adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto fine powder of Typha latifolia L. root: kinetics and isotherm studies

Fine powder of Typha latifolia L. root was used for adsorption of copper and zinc ions from buffered and nonbuffered aqueous solutions. The adsorption reached equilibrium in 60 min. During this time, more than 90 % of the adsorption process was completed. The effect of initial pH, initial concentration of metal ion, and contact time was investigated in a batch system at room temperature. The optimum adsorption performance was observed at pH 5.00 and 4.25 for nonbuffered solutions of Cu(II) and Zn(II), respectively, while for buffered solutions it occurred at pH 6.00. The total metal uptake decreased on application of ammonium acetate buffer, from 37.35 to 17.00 mg g^?1 and 28.80 to 9.90 mg g^?1 for Cu(II) and Zn(II) solutions, respectively, with 100 mg L^?1 initial concentration. The pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models were used to describe the adsorption kinetics. The experimental data followed the pseudo-second-order kinetic model. The biosorption equilibrium was well described by Langmuir and Freundlich isotherm models.     

Preparation of ethylene/α-olefins copolymers using (2-RInd)2ZrCl2/MCM-41 (R:Ph,H) catalyst,microstructural study

(2-RInd)₂ZrCl₂ (R:Ph,H) catalyst was supported on MCM-41 and ethylene copolymerization behavior as well as microstructure of copolymers were studied. A steady rate–time profile behavior was observed for homo and copolymerization of ethylene using supported catalysts. It was noticed that increasing the comonomer content can result in lower physical properties. The obtained results indicated that (2-PhInd)₂ZrCl₂/MCM-41 had higher ability of comonomer incorporation than the non-substituted supported catalysts. The CCC, CCE, and ECC (C: comonomer, E: ethylene) triad sequence distribution in backbone of copolymers were negligible, that means no evidence could be detected for comonomer blocks. The polymer characterization revealed that utilizing 1-octene instead of 1-hexene as the comonomer leads to more heterogeneous distribution of chemical composition. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and catalyst. (2-PhInd)₂ZrCl₂/MCM-41 produced copolymers containing narrower distribution of lamellae (0.3–1 nm) than the copolymer produce using Ind₂ZrCl₂/MCM-41 (0.3–1.6 nm).     

Investigation of a novel serpentine micromixer based on Dean flow and separation vortices

Meccanica - Passive micromixers, due to their relatively high mixing efficiency and simple fabrication, have wide applications in biological, medical, and chemical processes. Serpentine and...     

Ensemble Approach for Detection of Depression Using EEG Features

Depression is a public health issue that severely affects one’s well being and can cause negative social and economic effects to society. To raise awareness of these problems, this research aims at determining whether the long-lasting effects of depression can be determined from electroencephalographic (EEG) signals. The article contains an accuracy comparison for SVM, LDA, NB, kNN, and D3 binary classifiers, which were trained using linear (relative band power, alpha power variability, spectral asymmetry index) and nonlinear (Higuchi fractal dimension, Lempel–Ziv complexity, detrended fluctuation analysis) EEG features. The age- and gender-matched dataset consisted of 10 healthy subjects and 10 subjects diagnosed with depression at some point in their lifetime. Most of the proposed feature selection and classifier combinations achieved accuracy in the range of 80% to 95%, and all the models were evaluated using a 10-fold cross-validation. The results showed that the motioned EEG features used in classifying ongoing depression also work for classifying the long-lasting effects of depression.     

Short time synthesis of high quality carbon nanotubes with high rates by CVD of methane on continuously emerged iron nanoparticles

We report the variation of yield and quality of carbon nanotubes (CNTs) grown by chemical vapor deposition (CVD) of methane on iron oxide-MgO at 900-1000 °C for 1-60 min. The catalyst was prepared by impregnation of MgO powder with iron nitrate, dried, and calcined at 300 °C. As calcined and unreduced catalyst in quartz reactor was brought to the synthesis temperature in helium flow in a few minutes, and then the flow was switched to methane. The iron oxide was reduced to iron nanoparticles in methane, while the CNTs were growing.TEM micrographs, in accordance with Raman RBM peaks, indicate the formation of mostly single wall carbon nanotubes of about 1.0 nm size. High quality CNTs with I_G/I_D Raman peak ratio of 14.5 are formed in the first minute of CNTs synthesis with the highest rate. Both the rate and quality of CNTs degrades with increasing CNTs synthesis time. Also CNTs quality sharply declines with temperature in the range of 900-1000 °C, while the CNTs yield passes through a maximum at 950 °C. About the same CNTs lengths are formed for the whole range of the synthesis times. A model of continuous emergence of iron nanoparticle seeds for CNTs synthesis may explain the data. The data can also provide information for continuous production of CNTs in a fluidized bed reactor.     

Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.