A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and MFVM with emphasis on the treatment of angular derivative term, which appears in curvilinear coordinates due to angular redistribution. After final discretization equation for MFVM is introduced by using the step scheme and directional weights, the present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium. All of the results presented here support its accuracy as well as moderate efficiency. Finally, the present approaches are applied to a truncated cone-shaped enclosure as a body-fitted geometry case.     

CHIP-mediated hyperubiquitylation of tau promotes its self-assembly into the insoluble tau filaments

The tau protein is a highly soluble and natively unfolded protein. Under pathological conditions, tau undergoes multiple post-translational modifications (PTMs) and conformational changes to form insoluble filaments, which are the proteinaceous signatures of tauopathies. To dissect the crosstalk among tau PTMs during the aggregation process, we phosphorylated and ubiquitylated recombinant tau in vitro using GSK3β and CHIP, respectively. The resulting phospho–ub-tau contained conventional polyubiquitin chains with lysine 48 linkages, sufficient for proteasomal degradation, whereas unphosphorylated ub-tau species retained only one–three ubiquitin moieties. Mass-spectrometric analysis of in vitro reconstituted phospho–ub-tau revealed seven additional ubiquitylation sites, some of which are known to stabilize tau protofilament stacking in the human brain with tauopathy. When the ubiquitylation reaction was prolonged, phospho–ub-tau transformed into insoluble hyperubiquitylated tau species featuring fibrillar morphology and in vitro seeding activity. We developed a small-molecule inhibitor of CHIP through biophysical screening; this effectively suppressed tau ubiquitylation in vitro and delayed its aggregation in cultured cells including primary cultured neurons. Our biochemical findings point to a “multiple-hit model,” where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process, thus indicating that targeting tau ubiquitylation may be an effective strategy to alleviate the course of tauopathies.

Multiple-hit model for tau aggregation, where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

An ultraviolet-curable mold for sub-100-nm lithography

We describe a novel UV-curable mold that is stiff enough for replicating dense sub-100-nm features even with a high aspect ratio. It also allows for flexibility when the mold is prepared on a flexible support such that large area replication can be accomplished. The composite material of the mold is inert to chemicals and solvents. The surface energy is made low with a small amount of releasing agent such that the mold can be removed easily and cleanly after patterning. In addition, the material allows self-replication of the mold. These unique features of the mold material should make the mold quite useful for various patterning purposes.     

Radiation grafting from binary monomer mixtures. I. Vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol

Gamma-radiation grafting of vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol (VEEG) on polyethylene films has been studied from binary monomer mixtures. The effect of co-monomer composition and total exposure radiation dose on the grafting process is investigated. A combination of potentiometric and gravimetric techniques is applied to determine the grafting degree of each monomer in the final graft copolymer. The presence of more active monomer VEEG in the mixture was found to enhance the grafting of both monomers because the increasing of copolymerization rate which in turn increases the total grafting degree. The modification of the hydrophilic properties of the graft copolymer is studied by examining the grafted films for water- and copper (II) ions uptake.     

Swelling behavior of amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether,and their interaction with cationic surfactant

Amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether were synthesized by -radiation-induced free radical polymerization. Hydrogels with certain copolymer compositions showed thermo-sensitive behavior in aqueous solutions. The swelling behavior of the hydrogels in cetylpyridinium bromide aqueous solution was studied. Increased swelling of the hydrogels was observed in the surfactant solutions. The increased swelling was more prominent for the hydrogels with a higher content of hydrophobic moiety in the copolymer composition, and with higher surfactant concentration. The reason for this phenomenon is discussed. Treatment of some hydrogels in the surfactant solutions resulted in higher swelling ability in distilled water with distinct thermo-induced contraction over a narrow temperature interval.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.