Contributions of restructuring and oxidation to the aging of the surface of plasma polymers containing heteroatoms

The properties and composition of plasma polymer surfaces stored in air can change considerably over time, especially as a result of oxidative reactions. When plasma polymers contain an element other than O, it is possible to probe for mechanisms in addition to oxidation that contribute to the aging of the surface. Plasma polymers containing N were fabricated from either 1,3-diaminopropane (DAP),n-heptylamine (nHA), or allylamine (AA), and studied by X-ray photo-electron spectroscopy (XPS) and air/water contact angles (CA). For each of the plasma polymers, a multiexponential increase in the O/C ratio was observed over time using XPS. The N/C ratios remained constant (AA) or decreased somewhat (nHA and DAP). In contrast, the trends in CA values differed, declining for the nHA surfaces, rising for the AA, and changing little for the DAP. Surface roughness, assessed by scanning tunnelling or atomic force microscopy, did not change over time. The diverse adjustments in the polarity of each surface and the similar compositional changes between them are reconcilable if the aging of the plasma polymer surface is a manifestation of the superposition of concurrent oxidative reactions and partial surface reorientation; the former introduce polar groups and the latter transports then from the surface to deeper regions beyond the CA probe depth but within the XPS analysis depth. These processes vary between different plasma polymers. Data for the alkylamine plasma polymers is also compared with that for two plasma polymers fabricated from methanol. The change in composition, but not polarity, of the DAP surface after 4 days of storage demonstrates the importance of using multiple techniques to characterize the aging of plasma polymer surfaces.     

Polyelectrolyte blend multilayer films: surface morphology, wettability, and protein adsorption characteristics

We report the influence of polyelectrolyte (PE) multilayer films prepared from poly(styrene sulfonate)-poly(acrylic acid) (PSS-PAA) blends, deposited in alternation with poly(allylamine hydrochloride) (PAH), on film wettability and the adsorption behavior of the protein immunoglobulin G (IgG). Variations in the chemical composition of the PAH/(PSS-PAA) multilayer films, controlled by the PSS/PAA blend ratio in the dipping solutions, were used to systematically control film thickness, surface morphology, surface wettability, and IgG adsorption. Spectroscopic ellipsometry measurements indicate that increasing the PSS content in the blend solutions results in a systematic decrease in film thickness. Increasing the PSS content in the blend solutions also leads to a reduction in film surface roughness (as measured by atomic force microscopy), with a corresponding increase in surface hydrophobicity. Advancing contact angles (theta) range from 7 degrees for PAH/PAA films through to 53 degrees for PAH/PSS films. X-ray photoelectron spectroscopy measurements indicate that the increase in film hydrophobicity is due to an increase in PSS concentration at the film surface. In addition, the influence of added electrolyte in the PE solutions was investigated. Adsorption from PE solutions containing added salt favors PSS adsorption and results in more hydrophobic films. The amount of IgG adsorbed on the multilayer films systematically increased on films assembled from blends with increasing PSS content, suggesting strong interactions between PSS in the multilayer films and IgG. Hence, multilayer films prepared from blended PE solutions can be used to tune film thickness and composition, as well as wetting and protein adsorption characteristics.     

Determination of the H2-H2 potential from absolute integral cross section measurements

Absolute integral cross sections have been measured for n-H₂-n-H₂ at primary particle velocities between 1270 and 9650 m/sec with a 77 °K target. The number density of target particles was determined with an accuracy of 1% by the method of dynamic expansion. The velocity dependence of the integral cross section was also measured for the isotopic systems n-D₂-n-H₂ and n-D₂-n-D₂ at primary beam velocities between 280 and 1170 m/sec with a 15 °K target. All available integral cross section data are compared with literature potentials. A new potential is proposed, which exhibits one bound state for H₂-H₂.Dedicated to Professor H. Hartmann on his 60^th birthday.     

Concurrent restructuring and oxidation of the surface of n-hexane plasma polymers during aging in air

Angle-dependent XPS and air/water contact angle (CA) measurements were performed on specimens of n-hexane plasma polymers at various times after fabrication in order to monitor the aging of the surfaces in contact with air. XPS revealed incorporation of oxygen over extended periods of time. The depth distribution of O changed in the course of aging. CAs decreased over the first 3 weeks, then increased again, and finally stabilized at 5 weeks. These results were interpreted in terms of two concurrent processes: spontaneous oxidation (initiated by trapped radicals), which increased the surface polarity, and surface restructuring, which caused the partial removal of polar groups from the interface with air. The former process made a larger contribution to the overall aging of the surfaces but the latter process also contributed measurably. Over the first 3 weeks, oxidation was rapid and surface restructuring was not competitive. Subsequently, the oxygen uptake slowed down markedly, and the outermost surface layers became oxygen depleted relative to the deeper layers, due to partial surface reorientation. The surface topography, assessed by STM, did not change on aging. The aging of n-hexane plasma polymer surfaces thus is due to superimposed effects arising from post-deposition oxidative processes and partial surface reorientation.     

A multi-technique study of the spontaneous oxidation of N-hexane plasma polymers

Long-term compositional changes were observed when n-hexane plasma polymers were stored in air at ambient temperature. These post-deposition changes were monitored over periods exceeding one year using XPS, grazing angle FTIR, and SEM. A rapid initial increase in the oxygen content was followed by a slower oxygen uptake, which continued for many months. In contrast to the reported autocatalytic acceleration of the oxidation of polyolefins, the rate of oxidation of n-hexane plasma polymers was found to decrease continuously, and it did not proceed to the same extent toward higher oxidation states. The plasma polymer coatings did not show physical manifestations of oxidative degradation such as cracking, reduction in thickness, or loss of physical integrity. Comparison of the XPS and FTIR data suggested that the top few nanometers of the plasma polymer coatings oxidized at a faster rate than the “bulk.” The experimental data were interpreted using a model comprising reactions known from the oxidative degradation of polyolefins: carbon-centered radicals, trapped in the course of the plasma deposition, combine with atmospheric oxygen to form metastable peroxy radicals and hydroperoxides, which decompose to generate a variety of stable product groups such as hydroxyl, carbonyl, and carboxylic groups. There was broad agreement between the XPS data and the time dependence of particular species in model calculations. © 1994 John Wiley & Sons, Inc.     

Weitere Messungen zur Anisotropie der intermolekularen Wechselwirkung durch Streuung von Molekülen in definiertem Quantenzustand

Improved measurements of the ratio of scattering cross sections for various molecular rotational states are reported for scattering of TlF in rotational states ¦J, M〉=¦1, 0〉 and ¦1, 1〉, and CsF in rotational states ¦2, 0〉 and ¦2, 2〉 by rare gases. The results are interpreted in terms of an angle dependent attractive potentialV=?2ε(r _m /r) ⁶(1+q ₆ P ₂(cosΘ) in which the repulsive part of the interaction is neglected. The “high energy” approximation is used to calculate the cross section, which contains the velocity dependence and the state dependence as factors. The experiments show for all scattering partners with the exception of He and Ne, that the state dependence is velocity independent. In those cases this result provides a justification for the neglect of the repulsive potential term. The results for the anisotropy parameterq ₆, which to a good approximation depends only on properties of the moleculus, are:q ₆=0.23±0.01 for TlF,q ₆=0.28±0.02 for CsF.     

Deposition conditions influence the postdeposition oxidation of methyl methacrylate plasma polymer films

Plasma polymer films were deposited from methyl methacrylate (MMA) vapor under various plasma conditions and XPS and FTIR used to study the changes to the compositions of the films as they were stored in air for longer than 1 year. The plasma power input per monomer mass unit (W/FM) markedly affected the composition of the freshly deposited MMA plasma polymers. A low value of W/FM led to a high degree of retention of the original monomer structure, whereas a high value of W/FM resulted in substantial monomer fragmentation and the formation of a partially unsaturated material considerably different to conventional PMMA. As the MMA plasma coatings were stored in ambient air after fabrication, all showed spontaneous oxidative changes to their composition, but the extents and reaction products differed substantially. Deposition at low W/FM led to moderate oxidative changes, whereas high power led to a pronounced increase in the oxygen content over time and resulted in a wide range of carbon–oxygen functionalities in the aged material. As the initial compositions/plasma deposition conditions thus influenced the oxidative postdeposition reactions, MMA plasma polymers deposited under different conditions not only varied in their initial composition but then became even more diverse as they aged. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 985–1000, 1998     

Immobilization and surface characterization of NeutrAvidin biotin-binding protein on different hydrogel interlayers

For a number of potential applications, it is desirable to immobilize avidin class molecules onto solid supports and exploit their ability to bind biotinylated molecules with high affinity. NeutrAvidin molecules were surface immobilized in various ways. In this study, NeutrAvidin was covalently attached by carbodiimide chemistry onto carboxyl groups of polyacrylic acid and carboxymethyl-dextran hydrogel interlayers. A third strategy involved the affinity "docking" of NeutrAvidin onto a biotinylated poly(ethylene glycol) interlayer. These three interlayers were selected for their low nonspecific binding of proteins, which was expected to minimize surface binding of NeutrAvidin by nonspecific interfacial adsorption. X-ray photoelectron spectroscopy (XPS) analyses allowed detailed characterization of the multilayer fabrication steps. An ELISA assay was used to measure NeutrAvidin activity, which varied with the surface immobilization route. Atomic force microcopy (AFM) force measurements showed that the hydrogel interlayer contributed to a repulsive force and verified the specific interaction between biotinylated AFM tips and the NeutrAvidin surfaces. When a solution of free biotin was injected into the AFM liquid cell, the force curve changed substantially and became identical to that recorded between surfaces carrying no NeutrAvidin, indicating that the free solution biotin had displaced NeutrAvidin proteins off the PEG-biotin layer.     

Characterization of low-fouling ethylene glycol containing plasma polymer films

Low-protein-fouling poly(ethylene glycol) (PEG-like) plasma polymer films were prepared using radio frequency glow discharge polymerization of diethylene glycol dimethyl ether (DGpp) on top of a heptylamine plasma polymer primer layer. By varying the plasma deposition conditions, the chemistry of the DGpp film was influenced, especially in regard to the level of ether content, which in turn influenced the relative levels of bovine serum albumin and lysozyme protein fouling. Surface potential measurements indicated that these surfaces carried a net negative charge. While protein fouling remained low ( approximately 10 ng/cm2), there was a slightly higher level of the positively charged protein adsorbed on these films than the negative protein. The interaction forces measured between a silica spherical surface on both "high"- and "low"-protein-fouling DGpp films were all repulsive and short ranged (2-3 nm). There was no correlation between the surface forces measured for high- and low-protein-fouling DGpp films. Thus, it appears that enthalpic effects are very important in reducing protein adsorption. We therefore conclude that it is the concentration of residual, ethylene glycol containing species that are the crucial parameter determining protein resistance due to a combination of both entropic and enthalpic effects.     

One step multifunctional micropatterning of surfaces using asymmetric glow discharge plasma polymerization

Micropatterning of surfaces with varying chemical, physical and topographical properties usually requires a number of fabrication steps. Herein, we describe a micropatterning technique based on plasma enhanced chemical vapour deposition (PECVD) that deposits both protein resistant and protein repellent surface chemistries in a single step. The resulting multifunctional, selective surface chemistries are capable of spatially controlled protein adhesion, geometric confinement of cells and the site specific confinement of enzyme mediated peptide self-assembly.