Optimisation of pressurised liquid extraction by experimental design for quantification of pesticides and alkyl phenols in sludge,suspended materials and atmospheric fallout by liquid chromatography–tandem mass spectrometry

The study proposes an analytical method to quantify 10 alkylphenols and 12 pesticides at ultra-trace levels by liquid chromatography in reverse mode coupled to positive electrospray ionisation–tandem mass spectrometry. The extraction procedure from environmental solids was optimised by pressurised liquid extraction using acetonitrile:isopropanol (1:1, v/v). The influence of several extraction experimental factors, temperature, pressure, duration and number of cycles, related to the PLE was investigated by an original and efficient chemometric approach. The optimised extraction method (80 °C, 40 bar, 10 min, 1 cycle) exhibited recoveries between 67 and 127% with RSD mostly under 13%. The whole method was applied to real samples: sludge, suspended materials, atmospheric fallouts and roof deposit. Pollutant levels were between 1 μg kg⁻¹ and 5.9 mg kg⁻¹.     

Development and optimisation of a single extraction procedure for the LC/MS/MS analysis of two pharmaceutical classes residues in sewage treatment plant

A unique extraction procedure leading to the separation of 2 different pharmaceutical classes molecules has been developed and optimised by chemometric tools. From only one sampling, this analytical method allows the determination of 21 pharmaceuticals from corticosteroids and β-blockers classes. Performing the SPE on Oasis MCX (mixed-mode cation exchange), the sequential elution of each pharmaceutical class is achievable, allowing a high purity level of extracts as well as high recovery rates. Performing a unique sample preparation results in an important save of time. The extracts were then analysed by LC/MS/MS, using a Hibar Purospher Star column for β-blockers and an X-Bridge column for corticosteroids with formate buffer (pH 3.8)/AcN and water/AcN mobile phases, respectively. This work also includes a study of the chromatographic and mass spectrometric parameters in order to increase the analyte signal. The optimised SPE-LC/MS/MS method was then applied to environmental samples from sewage treatment plant (STP). β-Blockers and corticosteroids were detected, respectively, in concentrations up to 318 ng L⁻¹ (sotalol) and 174 ng L⁻¹ (cortisone), in STP influents. Moreover, both pharmaceutical classes have also been detected in STP effluents. As far as we know, this is the first paper reporting the detection of corticosteroids in environmental waters. The developed analytical method can be used in further studies to investigate the environmental contamination by these drugs.     

Urinary signature of anabolic steroids and glucocorticoids in humans by LC-MS

A metabonomic strategy based on LC-MS was employed to investigate the metabolic profile of urine samples from 20 athletes who had been tested positive for corticoids and anabolic steroids and 29 controls. In this aim, different sample preparations and chromatographic conditions were compared. The acquired LC-MS data of doped athletes and controls were subjected to analysis of variance (ANOVA) and principal component analysis (PCA). Using this approach, molecular signature of human urine was obtained showing that metabonomics could be a complementary tool to discriminate different urinary profiles and to track down metabolic changes in humans.     

Experimental designs to investigate capillary electrophoresis-electrospray ionization-mass spectrometry enantioseparation with the partial-filling technique

An experimental design approach is described to evaluate the main electrophoretic parameters involved in the enantioseparation of pharmaceuticals by capillary electrophoresis (CE) coupled to electrospray ionization-mass spectrometry (ESI-MS). For all experiments, the partial-filling technique was applied to avoid the chiral selector entering in the mass spectrometer ion source with a negative effect on the electrospray performance. To carry out enantioseparation, a volatile buffer constituted of 20 mM ammonium acetate at pH 4.0, and a polyvinyl alcohol-coated capillary were used. Methadone was employed as the model compound and three different cyclodextrins (CDs), namely sulfobutyl ether-beta-CD, carboxymethylated-beta-CD and hydroxypropyl-beta-CD, were selected in order to study the countercurrent process. Two different experimental designs were chosen: (i) a full-factorial design to examine the effects and significance of the investigated factors, and (ii) a central composite face-centered design to establish the mathematical model of the selected responses in function of experimental factors. The chiral selector concentration, percentage of the capillary filled with the chiral selector, and drying gas nebulization pressure were three relevant factors taken into consideration. For each CD, the methadone enantiomeric resolution, apparent selectivity, and migration time of the second enantiomer were established as responses. The latter were systematically related to experimental parameters with the help of multiple linear regression. It is noteworthy that the behaviour was different in function of the chiral selector charge. Results revealed that the nebulization pressure involved in the electrospray process and the CD concentration had a significant effect on the enantiomeric resolution, while the effect of the separation zone length was less pronounced. Finally, response surfaces were drawn from the mathematical model and experimental conditions were selected to allow a robust determination of methadone enantiomers by CE-MS.     

Optimization of fast CE analyses of ecstasy derivatives by use of experimental designs

Summary The separation by capillary electrophoresis of five ecstasy derivatives has been evaluated by means of experimental designs. A full-factorial design and a central composite design were employed to optimize the experimental conditions for a fast separation. With a conventional capillary (62.5 cm length) analytes were separated in less than 8 min. When the capillary length was reduced the analysis time decreased substantially. Comparisons were made between different procedures (e.g. working at a constant field or at constant voltage) and finally, a fast separation of five Ecstasy derivatives was achieved in 1 min.     

New separation method for organic and inorganic selenium compounds based on anion exchange chromatography followed by inductively coupled plasma mass spectrometry

We describe a new method for separating the organic and inorganic selenocompounds methaneseleninic acid, selenite, selenate, methylselenocysteine, selenocystine as well as both selenomethionine and its oxidized form. The separation is performed on a Hamilton PRP-X100 column. According to the literature, the oxidized form of selenomethionine—which is easily formed—is eluted close to the dead volume when this column is used. The choice of parahydroxybenzoic acid as mobile phase enabled us to elute all of these species after this oxidized form, resulting in better identification and quantification. The factors determining separation (eluent concentration, pH, gradient) were optimized via an experimental design. Application of the method to yeast and commercial tablets showed that the principal Se compound present was selenomethionine, which was also present in its oxidized form.     

Optimization of the coupling of high-temperature liquid chromatography and flame ionization detection application to the separations of alcohols

The feasibility of coupling high-temperature liquid chromatography (HTLC) to flame ionization detection (FID) has been studied. FID parameter values (hydrogen flow-rate, air flow-rate and FID temperature), typically set in gas chromatography are rarely suitable for liquid chromatography. Best values depend obviously on the water flow rate which is defined depending on both column temperature and column internal diameter. The FID parameters were optimized according to the water flow-rate by means of an experimental design. The potential of the method is shown with some alcohol separations and the value of increasing column temperature while reducing the column diameter is highlighted.