Liquid-liquid extraction of Th(IV) with Cyanex302

Summary Th(IV) was quantitatively extracted from 1 ^. 10^-3M HNO₃ using 1 ^. 10^-3M Cyanex302 in xylene and was stripped from the organic phase with 5M HCl. The effect of different parameters affecting the extraction was systematically studied to achieve optimum conditions for the extraction of thorium. Based on the data some separations of thorium from binary and complex mixtures and its recovery from monazite sand were achieved. The method is reproducible with a relative standard deviation of 0.4%.     

Polarographic study of complexes of metal ions and dibasic acids-II Complexes of lead with malonic, succinic, glutaric and adipic acids

The malonate, succinate, glutarate and adipate complexes of lead have been examined polarographically and the overall stability constants evaluated. The values found are log beta(1) = 2.60, 2.40, 2.48, 2.38; log beta(2) = 3.62, 3.73, 3.45, 3.20; log beta(3) = 4.32, 4.11, 3.90, 3.69, for the malonate, succinate, glutarate and adipate complexes respectively.     

Chronopotentiometry in fused lithium chloride-potassium chloride

Previous work in the application of chronopotentiometry in aqueous and fused salt media has been reviewed. This investigation describes the application of this principle to the reduction of cadmium, cobalt, lead and thallium ions in a fused eutectic mixture of potassium, chloride and lithium. chloride at 450°C. Platinum microelectrodes of different areas and geometry were used. The transition time was limited to the order of 0.2 to 0.7 sec using oscillographic recording.It was found that so long as the dimensions of the electrode were considerably greater than the thickness of the diffusion, layer, linear diffusion theory was obeyed. The transition time constants for cadmium, cobalt, lead and thallium ions were found to be 0.83± 0.02, 0.90 ± 0.03, 0.95 ± 0.04, and 0.59 ± 0.02.10³ amp cm sec$\text{1}\text{2}$ per mole, respectively. The diffusion coefficients of these ions were calculated to be 2.08, 2.42, 2.18 and 3.88.IO^-5 cm² sec^-1, respectively.     

First observation of the P-wave spin-singlet bottomonium states hb(1P) and hb(2P)

We report the first observations of the spin-singlet bottomonium states h(b)(1P) and h(b)(2P). The states are produced in the reaction e(+)e(-)→h(b)(nP)π(+)π(-) using a 121.4 fb(-1) data sample collected at energies near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We determine M[h(b)(1P)]=(9898.2(-1.0-1.1)(+1.1+1.0)) MeV/c(2) and M[h(b)(2P)]=(10,259.8±0.6(-1.0)(+1.4)) MeV/c(2), which correspond to P-wave hyperfine splittings ΔM(HF)=(+1.7±1.5) and (+0.5(-1.2)(+1.6)) MeV/c(2), respectively. The significances of the h(b)(1P) and h(b)(2P) are 5.5σ and 11.2σ, respectively. We find that the production of the h(b)(1P) and h(b)(2P) is not suppressed relative to the production of the Υ(1S), Υ(2S), and Υ(3S).     

Studies on stability of bi-functional P3HT:PCBM:rubrene optoelectronic devices

Investigations are carried out for stability in photovoltaic response of bifunctional electroluminescent and photovoltaic devices, based on ternary blend of poly(3-hexylthiophene) (P3HT), phenyl [6,6′]C₆₁ butyric acid methyl ester (PCBM), and 5,6,11,12-tetraphenylnaphthacene (rubrene). P3HT and PCBM are important and the most frequent materials used for photovoltaic applications, therefore, for relative comparison, photovoltaic cells were also prepared using a binary mixture of P3HT and PCBM. Devices based on the ternary blend exhibited better stability in all photovoltaic parameters and the lifetime was almost doubled, but their photovoltaic efficiency was lower than that of those based on the binary blend. Longer lifetime of ternary blend devices is because of a relatively better thermal, electrochemical, and morphological stabilities of the ternary blend system. However, the lower efficiencies are because of the reduced photo-current and low fill factor (FF) due to an increased recombination and introduction of defects/trapping sites by rubrene molecules.     

Synthesis and characterization of a novel copolymer of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) and application in heavy metal ion removal from water

We demonstrate synthesis of water insoluble, novel copolymer P_A1 from condensation of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) monomers having high capacity to remove metal ions from aqueous solution. The presence of a high atomic percentage of nitrogen and sulfur atoms in P_A1 leads to strong ligating ability with metal ions. The monomers and the polymer have been characterized by FTIR, UV–Visible spectroscopy, CHNS elemental analysis, NMR, MALDI-MS, and TG/DTA. As a proof of concept, the P_A1 is tested for its ability to remove heavy metal ions Cu²⁺, Co²⁺, Fe²⁺, Ni²⁺, Mn²⁺, and CrO ₇ ^2? from aqueous solutions. P_A1 efficiently removed metals ions from the metal solutions. The highest absorption ability has been observed toward the iron salts where 0.969 g metal salt is absorbed by 1 g polymer. This study has implication for inexpensive and efficient polymer for purification of water.     

Thermally stimulated discharge current (TSDC) characteristics in β-phase PVDF–BaTiO3 nanocomposites

β-phase polyvinylidene fluoride (PVDF)–BaTiO₃ nanocomposite samples have been prepared by solution mixing method. XRD data represent that the crystallinity of PVDF decreases with increase in loading level of BaTiO₃ nanoparticles. DSC curve represents that the melting point of PVDF is lightly affected by loading concentration of BaTiO₃. The morphology and microstructure of PVDF and PVDF embedded by BaTiO₃ nanofillers were investigated by using inverted contrast microscopy (ICM) and scanning electron microscopy (SEM). FTIR interferrometry is proven that PVDF and BaTiO₃ are not chemically interacting; therefore, interaction of BaTiO₃ is van der Waals type of interaction. The thermally stimulated discharge current (TSDC) of PVDF and PVDF–BaTiO₃ nanocomposites sample was characterized by single peak. The observed TSDC peak is discussed on the basis of dipolar and interfacial polarization.     

Calcium and oxygen doping in Y Ba2Cu3Oy

Both oxygen and calcium play important roles in inducing superconductivity in Y Ba₂Cu₃O_y (YBCO), which is an antiferromagnetic insulator at low O and Ca content. O induces superconductivity in Ca-free YBCO, while Ca does similarly in oxygen-deficient YBCO. For doping oxygen HgO was used as it decomposes at 476 ^°C into Hg, which escapes from the matrix leaving the crystal unaltered, and O, which provide a way to dope O in YBCO. Considering these facts, polycrystalline samples of Y _1−xCa_xBa₂Cu₃O_y with x=0, 0.1 and 0.2 with and without HgO addition were prepared through a solid-state reaction method. The samples were sintered at 950 ^°C in open atmosphere. These synthesized samples were characterized through using the X-ray diffraction technique (XRD) for phase evaluation, scanning electron microscopy (SEM) for grain morphology, energy dispersive X-ray analysis (EDX) for compositional analysis and the four-contact measurement technique for determining the superconducting transition temperature.