Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

Congresses,conferences, symposia,meetings, and seminars in the field of chemical sciences held in 1995–1996

Information

Congresses, conferences, symposia, meetings, and seminars in the field of chemical sciences held in 1995–1996     

Comparative study of reflectance cells for PLS-FTIR determination of sugars in soft drinks

A comparative study has been carried out between a horizontal Attenuated Total Reflectance (h-ATR) cell and a Cylindrical Internal Reflection (CIR) cell (CIRCLE cell). Both cells were employed for the determination of glucose, fructose, sucrose and total sugar in soft drinks and fruit juices using absorbance measurements at two resolution values (4 and 8 cm^–1). Data were processed by Partial Least Squares regression (PLS). Using a resolution of 4 cm^–1, mean relative errors of prediction from 0.6% to 1.3% were obtained using the horizontal-ATR and from 0.6% to 2.8% using the CIRCLE cell resulting in a limit of detection from 0.03% in the case of sucrose to 0.21% for total sugar for the h-ATR and from 0.06% for sucrose to 0.13% for glucose using the CIRCLE cell. Both cells provided appropriate figures of merit, but the analytical sensitivity obtained using the h-ATR cell was three times higher than that obtained using the CIRCLE cell.     

Congresses,Conferences, Symposia,Meetings, and Seminars in the Field of Chemical Sciences held in 1995–1996

Information

Congresses, Conferences, Symposia, Meetings, and Seminars in the Field of Chemical Sciences held in 1995–1996     

Validated, non-destructive and environmentally friendly determination of cocaine in euro bank notes

A non-destructive, fast and environmentally friendly procedure has been developed for cocaine determination in euro bank notes. Cocaine was extracted with 15 ml methanol by vortex agitation during 5 min. The extract was evaporated and reconstituted in 0.5 ml methanol. GC-MS-MS analysis was performed using as precursor ion m/z 182.2, with an excitation energy voltage of 1.60 eV, being the product ions measured m/z 150.2 and 82.0. A limit of detection of 0.15 ng per note and a repeatability of 6%, established from the relative standard deviation, of a 1 ng ml(-1) level, were achieved. Recoveries of 101+/-2 and 98+/-3% were obtained for samples spiked with 100 and 10 microg respectively. Results show that all the euro bank notes measured (16 samples) were contaminated with cocaine in the range between 1.25 and 889 microg. Two different contamination levels, high level (150-889 microg) and low one (1.25-77 microg) were found and it could be related with the direct or indirect contact with the drug.     

Fourier transform infrared analysis of paint solvents

The composition of solvent mixtures employed in the paint industry was determined by Fourier transform infrared spectrometry. A procedure based on the use of the ratio between the absorbance of characteristic bands of each component permits the ratio between two solvents in a binary mixture to be determined, independently of the thickness of the sample film. Typical mixtures of xylol with butan-1-ol and with butyl acetate (xylol=mixture of o-, m- and p-xylenes) were used as model systems to develop the proposed procedure and the accuracy was determined using synthetic formulations. Another possible application of the procedure is the characterization of azeotropic mixtures.