Binding of erbium(III) and holmium(III) to native and chemically modified alfalfa biomass: a spectroscopic investigation

Traditional treatment methods used to clean-up heavy metal contamination of soils and waters are cost intensive whereas more cost effective methods need to be developed. The use of plant materials to remediate heavy contamination has been studied for the past two decades. This technique has shown much promise for many of the common heavy metal contaminants, but few studies have focused on the lanthanide series elements. By investigating the binding and interactions of the lanthanide elements to alfalfa biomass, a more complete understanding of the binding mechanisms and the interactions of heavy metals with biomaterials can be obtained. Different chemical functional groups on the alfalfa biomass, carboxyl, amino, sulfur, and ester groups, were modified to investigate the binding mechanisms of erbium(III) and holmium(III). Batch experiments were performed with native and chemically modified alfalfa biomass suggesting that the carboxyl groups play a major role in the binding of erbium(III) and holmium(III) to the alfalfa biomass. In addition, X-ray absorption spectroscopy (XAS) studies corroborated the data obtained from the batch experiments.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Spin-singlet clusters in the ladder compound NaV2O5

The space group of alpha(')-NaV2O5 turns below T(c) = 34 K from Pmmn with all V sites equivalent, into Fmm2 with three independent vanadium sites per layer. This is incompatible with models of charge ordering into V4+ and V5+. Our structure determination indicates that the phase transition consists of a charge ordering with three distinct valence states, formally V4+, V4.5+, and V5+. The singlet formation is not associated with dimerization on the spin ladder, but with the formation of spin clusters. Finally, we ascribe the quadrupling of the c axis to the large polarizability of the V2O5 skeleton.     

Dependence of pulser driving responses on electrical and motional characteristics of NDE ultrasonic probes

Acoustic performance in ultrasonic transmitters can be improved by means of a suitable electrical driving response and matching/tuning networks. It is important to predict this electrical response, but doing so is not easy because it departs notably from the nominal pattern with the loading probes. In practice, the analysis of HV pulser spikes in NDE applications requires fairly complex models in the transient regime and, in addition, non-linear problems could arise, especially in the case of tuned transmitters. In this paper, the most relevant influences of loading characteristics of NDT ultrasonic probes on the pulser electrical driving responses are evaluated in time and frequency domains. Conventional pulse generators and typical NDE pulsers are considered. Driving responses are analysed across commercial ultrasonic probes and, alternatively, across similar purely electrical loads. Distinct influences on pulser responses from electrical and motional sections of the probes are identified. All these aspects are studied on the basis of experimental and computer results.     

A study of the removal of selenite and selenate from aqueous solutions using a magnetic iron/manganese oxide nanomaterial and ICP-MS

Selenium (Se) is naturally occurring in the environment and is an essential nutrient in mammals. However, environmental Se can be increased to toxic levels through different industrial practices. The potential adsorption of the Se oxoanions, selenite and selenate, from aqueous solutions onto nanosynthesized MnFe₂O₄ was investigated using batch techniques and DRC-ICP-MS spectroscopy. The nanomaterial (NM) was laboratory synthesized through slow titration of a mixture of Fe²⁺ and Mn²⁺ ions. X-ray diffraction and Scherrer's equation were used to determine the phase of the material and crystallite size, respectively. The effects of pH, reaction time, competitive anions, and the adsorption capacity of the synthesized NM to bind selenite and selenate were investigated. The Langmuir isotherm was used to determine the binding capacity of the NM. Results showed that the phase of the nanomaterial was similar to Jacobsite with a size of 27.5 nm. Results also showed that the sorption of either 100 ppb of selenite or selenate was pH independent in the pH range 2 to 6 and occurred within 5 min of contact time. The introduction of Cl⁻ and NO₃⁻ anions individually added to solution had no significant effect on the sorption of either selenite or selenate. However, it was found that the addition of SO₄²⁻ had a competitive effect only on the sorption of selenate, first seen at 10 ppm and more pronounced at 100 ppm of SO₄²⁻. In the presence of 100 ppm of PO₄³⁻, the adsorption of selenate decreased to 87% while selenite sorption decreased to 20%. From the Langmuir isotherm equation it was determined that the nano-Jacobsite had a selenite and selenate binding capacity of 6573.76 and 769.23 mg Se/kg of NM, respectively.     

Organic-coated silver nanoparticles in biological and environmental conditions: Fate,stability and toxicity

This review paper presents the overview of processes involved in transformation of organic-coated silver nanoparticles (AgNPs) in biological systems and in the aquatic environment. The coating on AgNPs greatly influences the fate, stability, and toxicity of AgNPs in aqueous solutions, biological systems, and the environment. Several organic-coated AgNP systems are discussed to understand their stability and toxicity in biological media and natural water. Examples are presented to demonstrate how a transformation of organic-coated AgNPs in an aqueous solution is affected by the type of coating, pH, kind of electrolyte (mono- or divalent), ionic strength, organic ligands (inorganic and organic), organic matter (fulvic and humic acids), redox conditions (oxic and anoxic), and light. Results of cytotoxicity, genotoxicity, and ecotoxicity of coated AgNPs to food chain members (plants, bacteria, and aquatic and terrestrial organisms) are reviewed. Key factors contributing to toxicity are the size, shape, surface coating, surface charge, and conditions of silver ion release. AgNPs may directly damage the cell membranes, disrupt ATP production and DNA replication, alternate gene expressions, release toxic Ag⁺ ion, and produce reactive oxygen species to oxidize biological components of the cell. A progress made on understanding the mechanism of organic-coated AgNP toxicity using different analytical techniques is presented.     

The effect of cryogenic sample cooling on X-ray absorption spectra

It is common for samples to be cooled to near liquid He temperature (4 K) during measurement of their X-ray absorption spectra (XAS). This procedure is believed to improve spectrum quality either by minimizing radiation damage, or by decreasing thermal motions of atoms. The actual benefits realized by cooling are rarely assessed, since that would require duplicate measurements at multiple temperatures, followed by duplicate data analyses. With a cryostat installed, it is difficult to measure room temperature or hotter spectra, which often requires removing the cryostat from the beam path.Here we investigate the effect of cooling and show that it is not globally useful in X-ray absorption spectroscopy. Photolysis does not occur, or its consequences are not controlled by cooling. Secondary photochemical damage is delayed and is remote from the absorption site. Thermal motions do not usually contribute significantly to disorder and consequent damping of EXAFS, either because vibrational amplitudes are small, or because static disorder and structural complexity affect EXAFS in the same way but more profoundly.The low probability of photochemical effects on XAS is in contrast to the situation with crystallography of biological specimens, where photochemical damage anywhere in the sample degrades the data set regardless of proximity to atoms of one specific element. Thermal disorder becomes important in certain types of samples and when the Debye-Waller factor is itself used as a tool. In most cases, it is more efficient to first measure room temperature spectra, and then repeat measurement using a cryostat of only those spectra where the objectives of the analysis justify an attempt to gain more information.     

Use of chemical modification and spectroscopic techniques to determine the binding and coordination of gadolinium(III) and neodymium(III) ions by alfalfa biomass

Metal pollution in the aqueous environment has become an important issue in the past few decades leading to extensive research in the area of pollution remediation. Most of the recent research in this area has been in bioremediation including phytofiltration and phytoextraction. Although there has been a lot of research done in the field of metal interactions with plants, the actual mechanism(s) and ligands involved are not well understood. Through a series of batch experiments, including pH profiles, time dependency studies, and capacity experiments, we have investigated the binding of Gd(III) and Nd(III) to alfalfa biomass. Batch pH studies showed that the optimum binding was at pH 5.0 for both elements. The time dependency experiments showed that the binding occurs within the first 5 min of contact and remains constant for up to 60 min. In addition, chemical modifications to the alfalfa biomass were performed to indirectly determine the ligands on the biomass responsible for metal binding. For Gd(III) binding, it was shown that the carboxyl groups on the biomass play the most important role in metal ion binding. However, for Nd(III), not only was it found that the carboxyl groups play an important role in the binding, but in addition, the amino groups on the biomass also play an important role in the binding of the metal ions. Further studies using X-ray absorption spectroscopy (XAS) showed that the Gd(III) and Nd(III) ions were bound to the alfalfa biomass through oxygen (or nitrogen ligands), which were coordinated to carbon atoms. The lanthanide complexes within the biomass included some coordinated water molecules.