Ionicity,atomic radii,and structure in the layered dichalcogenides of group IVb,Vb, and VIb transition metals

Pauling's electronegativities are introduced in considerations of bond lengths, lattice constants, atomic radii, charge densities, structures, and heats of formation of the layered dichalcogenides of Groups IVb, Vb, and VIb transition metals. Strong correlations are found between these and the fractional ionic character of the metal-chalcogen bonds as defined by Pauling. A critical effective radius ratio is defined that separates trigonal prismatic and octahedral compounds.     

Interaction of atrazine with Laurentian fulvic acid: binding and hydrolysis

Ultrafiltration fractionation and liquid chromatography (LC) have been applied to the study of the binding and hydrolysis of the polar herbicide atrazine on a stoichiometrically well characterized fulvic acid. Binding requires extensive carboxylate site protonation but the binding sites represent a very small fraction of total carboxylate. The data show that binding of atrazine is not competitive with binding of the hydrolytic product hydroxyatrazine. However, smaller molecular weight fractions of the fulvic acid mixture compete with atrazine for sites on the larger molecular weight fraction. Binding equilibrium is not rapid. A model of binding involving hydrogen bonding and/or charge-transfer complexing to specific sites created dynamically by the conformational equilibria of the higher molecular weight polymeric fulvic acid fractions is proposed as the best accommodation of the variety of observed facts.     

Evidence of impurities in thiolated single-stranded DNA oligomers and their effect on DNA self-assembly on gold

The diversity of techniques used in the synthesis, treatment, and purification of the single-stranded DNA oligomers containing a thiol anchor group (SH-ssDNA) has led to a significant variation in the purity of commercially available SH-ssDNA. In this work, we use X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to study how the impurities present in commercially synthesized SH-ssDNA oligomers affected the structure of the resulting DNA films on Au. XPS results indicate that two of the purchased SH-ssDNA oligomers contain excess carbon and sulfur. The molecular fragmentation patterns obtained with ToF-SIMS were used to determine the identity of several contaminants in the DNA films, including poly(dimethylsiloxane) (PDMS), lipid molecules, and sulfur-containing molecules. In particular, the ToF-SIMS results determined that the excess sulfur detected by XPS was due to the presence of dithiothreitol, a reductant often used to cleave disulfide precursors. Furthermore, we found that the SH-ssDNA self-assembly process is affected by the presence of these contaminants. When relatively pure SH-ssDNA is used to prepare the DNA films, the P, N, O, and C atomic percentages were observed by XPS to increase over a 24-h time period. In contrast, surfaces prepared using SH-ssDNA containing higher levels of contaminants did not follow this trend. XPS result indicates that, after the initial SH-ssDNA adsorption, the remaining material incorporated into these films was due to contamination.     

H2/CO2 separations in multicomponent metal-adeninate MOFs with multiple chemically distinct pore environments

Metal–organic frameworks constructed from multiple (≥3) components often exhibit dramatically increased structural complexity compared to their 2 component (1 metal, 1 linker) counterparts, such as multiple chemically unique pore environments and a plurality of diverse molecular diffusion pathways. This inherent complexity can be advantageous for gas separation applications. Here, we report two isoreticular multicomponent MOFs, bMOF-200 (4 components; Cu, Zn, adeninate, pyrazolate) and bMOF-201 (3 components; Zn, adeninate, pyrazolate). We describe their structures, which contain 3 unique interconnected pore environments, and we use Kohn–Sham density functional theory (DFT) along with the climbing image nudged elastic band (CI-NEB) method to predict potential H₂/CO₂ separation ability of bMOF-200. We examine the H₂/CO₂ separation performance using both column breakthrough and membrane permeation studies. bMOF-200 membranes exhibit a H₂/CO₂ separation factor of 7.9. The pore space of bMOF-201 is significantly different than bMOF-200, and one molecular diffusion pathway is occluded by coordinating charge-balancing formate and acetate anions. A consequence of this structural difference is reduced permeability to both H₂ and CO₂ and a significantly improved H₂/CO₂ separation factor of 22.2 compared to bMOF-200, which makes bMOF-201 membranes competitive with some of the best performing MOF membranes in terms of H₂/CO₂ separations.

Tailorable multicomponent MOFs and MOF membranes for efficient H₂/CO₂ separation.     

Synthesis and formulation of self-immolative PEG-aryl azide block copolymers and click-to-release reactivity with trans-cyclooctene

Self-immolative aryl azides can react with trans-cyclooctenes (TCO), triphenylphosphines or hydrogen sulfide (H₂S) to activate prodrugs, imaging probes and drug delivery systems. To date, the synthesis of polymers containing these aryl azide self-immolative linkers and their reactivity with a strained alkene (i.e., in a bioorthogonal reaction) has not been explored. Also, due to the instability of aryl azides towards light and high temperatures, the polymerization methods compatible with aryl azides are limited. Through systematic investigation of the reversible addition-fragmentation chain transfer (RAFT) and atom transfer radical polymerization (ATRP) methods, a self-immolative PEG-aryl azide block copolymer (PEG₄₅-b-ABOC₂₈ 2 ) and a non-responsive 4-fluoroaryl block copolymer (PEG₄₅-b-FBOC₂₄ 3 ) was prepared. ATRP provided the desired polymers in a highly controlled manner, whereas the RAFT conditions led to higher levels of aryl azide polymer degradation. The ATRP derived polymers 2 and 3 were formulated into nanoparticles of approximately 200 nm diameter, and particle triggering was demonstrated by the [3+2]-cycloaddition reaction of TCO with PEG₄₅-b-ABOC₂₈ 2 in solution (pure polymer) and as a formulated nanoparticle. Preliminary in vitro cell viability studies suggested that the stimuli-responsive aryl azide polymers/nanoparticles are not cytotoxic up to 200 μg/ml concentrations.     

Aryl Nitro Reduction with Iron Powder or Stannous Chloride under Ultrasonic Irradiation

The selective reduction of aryl nitro compounds in the presence of sensitive functionalities, including halide, carbonyl, nitrile, and ester substituents, under ultrasonic irradiation at 35 kHz is reported in yields of 39–98%. Iron powder proved superior to stannous chloride with high tolerance of sensitive functional groups and high yields of the desired aryl amines in relatively short reaction times. Simple experimental procedure and purification also make the iron reduction of aryl nitro compounds advantageous over other methods of reduction.     

Superconductivity in layer compounds intercalated with paramagnetic molecules

A new class of superconducting molecular intercalation complexes has been discovered in which paramagnetic molecules reside between metallic dichalcogenide layers six Angstroms thick. Interlayer coupling of the order parameter by Josephson tunneling appears unlikely.     

An investigation of the chemical stability of arsenosugars in basic environments using IC-ICP-MS and IC-ESI-MS/MS

This paper evaluates the chemical stability of four arsenosugars using tetramethylammonium hydroxide (TMAOH) as an extraction solvent. This solvent was chosen because of the near quantitative removal of these arsenicals from difficult to extract seafood (oysters and shellfish). Four arsenosugars (3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropylene glycol--As(328), 3-5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropanesulfonic acid--As(392), 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl hydrogen sulfate--As(408), and 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl-2,3-hydroxypropyl phosphate--As(482)) were evaluated. The stability of these four arsenosugars were studied independently in a solution of 2.5% TMAOH at 60 degrees C over a period of up to 8 h. Two arsenosugars, As(328) and As(392), were found to be relatively stable in this solution for up to 8 h. However, As(408) and As(482) formed detectable quantities of dimethylarsinic acid (DMAA) and As(328) within 0.5 and 2 h, respectively. It was found that 97% of As(408) degrades after 8 h of treatment producing 3.4 times as much DMAA as As(328). This is contrary to As(482), which produces 13 times as much As(328) as DMAA and only 37% of the As(482) was converted by the 8 h treatment at 60 degrees C. These degradation products led to the investigation of weaker TMAOH extraction solvents. Three different concentrations (2.5%, 0.83% and 0.25%) were used to determine the effect of TMAOH concentration on the degradation rate of As(408). By reducing the TMAOH concentration to 0.83%, the conversion of the arsenosugar to As(328) and DMAA is nearly eliminated (less than 5% loss). Arsenosugars, As(408) and As(482), were also studied in 253 mM NaOH to verify the degradation products. The NaOH experiments were conducted to investigate a possible hydroxide based reaction mechanism. Similar degradation plots were found for each arsenosugar when compared to the 2.5% TMAOH data. A mechanism has been proposed for the formation of As(328) from As(408) and As(482) in base via an SN2 reaction (hydroxide attack) at the side chain carbon adjacent to the inorganic ester. The formation of DMAA is observed in all arsenosugars after prolonged exposure. This probably occurs via an SN2 attack at the arsenic atom.     

Surface swabbing technique for the rapid screening for pesticides using ambient pressure desorption ionization with high-resolution mass spectrometry

A rapid screening method for pesticides has been developed to promote more efficient processing of produce entering the United States. Foam swabs were used to recover a multiclass mixture of 132 pesticides from the surfaces of grapes, apples, and oranges. The swabs were analyzed using direct analysis in real time (DART) ionization coupled with a high‐resolution Exactive Orbitrap? mass spectrometer. By using a DART helium temperature gradient from 100–350°C over 3 min, a minimal separation of analytes based on volatility differences was achieved. This, combined with the Exactive's mass resolution of 100 000, allowed the chromatographic step, along with the typical compositing and extraction steps associated with gas chromatography/mass spectrometry (GC/MS) or liquid chromatography/mass spectrometry (LC/MS) approaches, to be eliminated. Detection of 86% of the analytes present was consistently achieved at levels of 2 ng/g (per each apple or orange) and 10 ng/g (per grape). A resolution study was conducted with four pairs of isobaric compounds analyzed at a mass resolution of 100 000. Baseline separation was achieved with analyte ions differing in mass by 25 ppm and analyte ions with a mass difference of 10 ppm were partially resolved. In addition, field samples that had undergone traditional sample preparation using QuEChERS (quick, easy, cheap, rugged, and safe) were analyzed using both LC/MS and DART‐MS and the results from the two techniques were found to be comparable in terms of identification of the pesticides present. The use of swabs greatly increased sample throughput by reducing sample preparation and analysis time. Published in 2010 by John Wiley & Sons, Ltd.