Optimal acoustic fields in compact thermoacoustic refrigerators

Thermoacoustic refrigerators have been developed during the last 15 years, employing quasi-standing resonant acoustic waves inside fluid-filled cavities to transfer heat along a stack region. Because higher efficiency can be reached when a significant travelling wave component exists in the resonator, specific resonant thermoacoustic devices have been designed allowing to adjust more or less the ratio of travelling and standing wave components. However, the acoustic pressure field and the particle velocity field do not appear to be the optimal ones, for the thermal quantities of interest. Thus, it is the aim of the paper to present a new kind of thermoacoustic standing wave-like device which allows to control easily and independently the pressure field and the particle velocity field, after investigating the optimal acoustic field, in the stack region, for the main parameters of interest, i.e. the temperature gradient, the thermoacoustic heat flow and the coefficient of performance.     

Distinction between surface hydroxyl and ether groups on boron-doped diamond electrodes using a chemical approach

While it is clearly established that oxidation of as-grown boron-doped diamond (BDD) interfaces results in the introduction of different surface oxygen functions such as ether, carbonyl and hydroxyl groups, there is no reported approach which can clearly distinguish between the different surface functions. For further surface functionalization, it is important to quantify the presence of each group on the diamond surface. In this paper, the presence and amount of surface hydroxyl groups is identified using esterification of the COH groups with trifluoroacetic acid. The presence of CF₃ group in the acid allowed the identification and estimation of the amount of surface hydroxyl groups using X-ray photoelectron spectroscopy (XPS).     

Use of polymer-supported phenyltin for the creation of aryl-aryl or aryl-heteroaryl bonds via Stille cross-coupling reactions

An insoluble polymer-supported phenyltin reagent was successfully used in Stille cross-coupling reactions with aryl- and heteroaryl-halides. Cross-coupling products were isolated in good to high yields with very low contamination by tin and palladium residues after removal of the residual supported organotin halide. The regeneration and recyclability of the supported phenyltin reagent were also examined and proved to be possible, but required palladium cleaning of the grafted polymer to be efficient along 4 cycles when Pd(PPh₃)₄ was used as catalyst.     

Real-time increase in depth of field of an uncooled thermal camera using several phase-mask technologies

Imaging systems that combine a phase mask in the pupil and digital postprocessing may have better performance than conventional ones. We have built such a system to enhance the depth of field of an uncooled thermal camera. The phase masks are binary, their structures are optimized thanks to an image quality criterion, and they have been realized with three different technologies that give equivalent results. The deconvolution postprocessing is performed in real time with a graphics processing unit. A significant increase of the depth of field of a factor 3 has been obtained.     

Aqueous behaviour of cationic surfactants containing a cleavable group

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.     

Highly sensitive label-free in vitro detection of aflatoxin B1 in an aptamer assay using optical planar waveguide operating as a polarization interferometer

Analytical and Bioanalytical Chemistry - This work reports on further development of an optical biosensor for the in vitro detection of mycotoxins (in particular, aflatoxin B1) using a highly...     

Guidelines to design new spin crossover materials

This review focuses on new families of spin crossover (SCO) complexes based on polynitrile anions as new anionic ligands or on polyazamacrocycles as neutral macrocyclic ligands. We have shown that the structural and electronic characteristics (original coordination modes and high electronic delocalization) of the polynitrile anions can be tuned by slight chemical modifications such as substitution of functional groups or variation of the negative charge to design new discrete or polymeric SCO systems.In our ongoing work on the design of new molecular systems based on new ligands that can be fine-tuned via chemical modifications, another promising way which has been recently developed in our group concerns the use of new neutral polydentate ligands which are able to tune the ligand field energy around the metal centre. Here we report some recent original Fe(II) SCO complexes based on such polydentate ligands.