Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Complexation of poly(vinyl alcohol)–congo red aqueous solutions. 3. Dynamic light scattering study

Mesoscopic structures of poly(vinyl alcohol)(SINGLEBOND)Congo red (PVA(SINGLEBOND) CR) complexes in aqueous solutions were investigated in terms of dynamic light scattering (DLS) technique. The intensity-intensity time correlation function, g⁽²⁾(t), was analyzed with an equation including a single and a stretched exponential function. Two diffusion coefficients, D_f (fast) and D_s (slow) were evaluated. D_f was converted to the apparent correlation length, ξ_app, via the mode-mode coupling hypothesis. The estimated ξ_app was insensitive to the sol(SINGLEBOND)to(SINGLEBOND)gel transition but decreased with CR concentration. This change may be related to the electrostatic screening effect. On the other hand, D_s oscillates with increasing CR concentration at a specific PVA concentration range. This explains well the reentrant sol(SINGLEBOND)gel(SINGLEBOND)sol(SINGLEBOND)gel transition behavior observed in the PVA(SINGLEBOND)CR systems. D_s seems to represent the mobility of the PVA(SINGLEBOND)CR complexes, which annihilates at the gel point. © 1996 John Wiley & Sons, Inc.     

Local chemical state change in Co–O resistance random access memory

Kelvin probe force microscopy (KFM) and conductive atomic force microscopy (C‐AFM) together with micro X‐ray photoelectron spectroscopy (XPS) were performed for the stacking structure comprising of the transition metal oxide Co–O and metal electrode, which exhibits large reproducible resistance switching. The application of the external voltage by the C‐AFM cantilever decreases the resistance of Co–O, which well accords with the non‐polar forming process observed in the Pt/Co–O/Pt trilayer, known as the candidate of resistance random access memory (ReRAM). Furthermore, the KFM and micro XPS experimentally revealed that the local reductive reaction of Co–O possibly nucleates the defect related energy levels which dominates the current conduction in the low resistance state. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Formulation and pharmacokinetic evaluation of tetracycline-loaded solid lipid nanoparticles for subcutaneous injection in mice

The aim of this work was to prepare tetracycline-loaded solid lipid nanoparticles (Tet-SLN), and to evaluate the potential of these colloidal carriers for subcutaneous injection. Tet-SLN was prepared by microemulsion method and the preparation conditions were optimized by ternary phase diagram. At optimized process conditions, lyophilized Tet-SLN showed spherical particles with a mean diameter of 87.2±46.9 nm and a negative zeta potential of -6.69 mV, up to 1.7% tetracycline drug content was achieved after loading. In vitro release test showed a biphasic release profile for Tet-SLN and more than 80% of the drug was liberated from Tet-SLN in 48 h. After subcutaneous injection of Tet-SLN to mice, a considerable sustained release was observed; tetracycline in blood could be detected lasting 36 h, and lower concentrations of tetracycline in all tissues tested compared to the free tetracycline solution were observed. In conclusion, Tet-SLN can be prepared well by microemulsion method and subcutaneous injection of SLN provide a new perspective for drug sustained release.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

Visualization of large-scale aqueous solubility data using a novel hierarchical data visualization technique

It is a difficult task to recognize the trends in molecular physical properties relevant to a specific chemical class and find a way to optimize potential compounds. We present here a novel hierarchical data visualization technique, named "HeiankyoView", to visualize large-scale multidimensional chemical information. HeiankyoView represents hierarchically organized data objects by mapping leaf nodes as colored square icons and nonleaf nodes as rectangular borders. In this way, data objects can be expressed as equishaped icons without overlapping one another in the two-dimensional display space. HeiankyoView has been applied to visualize aqueous solubility data for 908 compounds collected from the published literature. When the results of a recursive partitioning analysis and hierarchical clustering analysis were visualized, the trends hidden in the solubility data could be effectively displayed as intuitively understandable visual images. Most interestingly, the data visualization technique, without any statistical computations, was able to assist us in extracting from such large-scale data meaningful information establishing that ClogP and the molecular weight are critical factors in determining aqueous solubility. Thus, HeiankyoView is a powerful tool to help us understand structure-activity relationships intuitively from a large-scale data set.     

Cellular NADH and NADPH Conformation as a Real-Time Fluorescence-Based Metabolic Indicator under Pressurized Conditions

Cellular conformation of reduced pyridine nucleotides NADH and NADPH sensed using autofluorescence spectroscopy is presented as a real-time metabolic indicator under pressurized conditions. The approach provides information on the role of pressure in energy metabolism and antioxidant defense with applications in agriculture and food technologies. Here, we use spectral phasor analysis on UV-excited autofluorescence from Saccharomyces cerevisiae (baker’s yeast) to assess the involvement of one or multiple NADH- or NADPH-linked pathways based on the presence of two-component spectral behavior during a metabolic response. To demonstrate metabolic monitoring under pressure, we first present the autofluorescence response to cyanide (a respiratory inhibitor) at 32 MPa. Although ambient and high-pressure responses remain similar, pressure itself also induces a response that is consistent with a change in cellular redox state and ROS production. Next, as an example of an autofluorescence response altered by pressurization, we investigate the response to ethanol at ambient, 12 MPa, and 30 MPa pressure. Ethanol (another respiratory inhibitor) and cyanide induce similar responses at ambient pressure. The onset of non-two-component spectral behavior upon pressurization suggests a change in the mechanism of ethanol action. Overall, results point to new avenues of investigation in piezophysiology by providing a way of visualizing metabolism and mitochondrial function under pressurized conditions.     

Reactive ion etching of FePt using inductively coupled plasma

We propose a reactive ion etching (RIE) process of an L1₀-FePt film which is expected as one of the promising materials for the perpendicular magnetic recording media. The etching was carried out using an inductively coupled plasma (ICP) RIE system and an etching gas combination of CH₄/O₂/NH₃ was employed. The L1₀-FePt films were deposited on (1 0 0)-oriented MgO substrates using a magnetron sputtering system. The etching masks of Ti were patterned on the FePt films lithographically. The etch rates of ∼16 and ∼0 nm/min were obtained for the FePt film and the Ti mask, respectively. The atomic force microscopy (AFM) analyses provided the average roughness (R_a) value of 0.95 nm for the etched FePt surface, that is, a very flat etched surface was obtained. Those results show that the highly selective RIE process of L1₀-FePt was successfully realized in the present study.     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.