Two‐stage copolycondensation of preformed oligomers with bisphenols by tosyl chloride/dimethylformamide/pyridine from distributions of resulting oligomers determined by a combination of gel permeation chromatography and NMR

A two‐stage co‐oligomerization of the oligomers initially formed from an equimolar mixture of isophthalic acid (IPA) and terephthalic acid (TPA) and 2,2‐bis(4‐hydroxyphenyl)propane (BPA, 50 mol %) with bisphenols (BPs, 20 mol %) was carried out using a tosyl chloride/dimethylformamide/pyridine condensing agent. The distributions of the resulting oligomers (n_x‐mers), which were quenched with methanol, were determined by a combination of gel permeation chromatography (GPC) and NMR. These distributions (presented by molar percentage) were conveniently calculated with the equation n_x (mol %) = n_x (% mol by GPC) × n₀ (mol % by NMR)/n₀ (% mol by GPC), where n_x (% mol) = n_x (wt % by GPC)/its molecular weight. The results showed the distributions of the preformed IPA/TPA‐BPA oligomers to be in fairly good accord with those obtained directly from GPC and to be supported by the NMR results. The calculation was applied to the co‐oligomers prepared up to a reaction of 0.7, at which there was an increase in the number of higher oligomers indivisible by GPC and the distributions could no longer be determined by molar percentage. The calculated distributions are discussed in relation to the results of copolycondensation. The sequence distributions in the resulting co‐oligomers, which were also examined by NMR, are compared with those in the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 44–51, 2004     

Polyesterification of aromatic dicarboxylic acids and bisphenols with tosyl chloride/dimethylformamide/pyridine promoted by the improvement of the difficult solubility of the activated diacids with lithium chloride

The solution polyesterification of dicarboxylic acids in pyridine, the activated intermediates of which were difficult to dissolve in tosyl chloride/dimethylformamide/pyridine, was investigated in the presence of lithium chloride. The solubility of the activated dicarboxylic acids was largely improved by the presence of the salt, and the polycondensation with bisphenols was greatly facilitated. The salt was more effectively added to a pyridine solution of dicarboxylic acids than to the activated dicarboxylic acids in pyridine. The favorable additive effect on the improved solubility was attributed to a lowered degree of association of the activated dicarboxylic acids, which led to distributions of the resulting oligomers from bisphenols at an earlier stage closer to the theoretical ones and yielded better polycondensation results. The reaction, which proceeded through favorable distributions of the co‐oligomers, produced copolymers of higher inherent viscosities and slightly block sequence distributions determined by NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2725–2733, 2004     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Thermotropic copolyamides from triethyleneglycol bis (4-carboxyphenyl) ether,aromatic diamines,and p-aminobenzoic acid

It is proposed that depression of the transition temperatures, especially the melting point (T_m), can be achieved by the introduction of a different amide bond structure into the copolyamides of dicarboxylic acids and diamines by copolymerization of aminocarboxylic acids, such as p-aminobenzoic acid. The effect was examined by the amount and distribution of the structure in the copolylamindes. Copolycondensations of PEG₃, p-aminobenzoic acid, and diamines with different chain lengths showed that the structural change of the amide bond in the copolymers, especially its distribution, was more important than its total amount in them. Several types of aminocarboxylic acids were briefly examined to study the effect. © 1994 John Wiley & Sons, Inc.     

Aromatic polyesters obtained directly from hydroxybenzoic acids by hexachlorocyclotriphosphatriazene (PNC) in pyridine

Polyaryl esters of moderate molecular weights were prepared by the direct polycondensation reaction of hydroxybenzoic acids and its derivatives with hexachlorocyclotriphosphatriazene (also known as phosphonitrilic chloride trimer, PNC) as a condensing agent in pyridine. Copolymerization of p-hydroxybenzoic acid with several hydroxybenzic acid derivatives was carried out to improve the processability of the polymer of p-hydroxybenzoic acid, which yields fusible and soluble copolymers of high inherent viscosities. Polymer solubility and thermal behavior were examined.     

Direct synthesis of aromatic polyesters by use of a sulfonium salt derived from tosyl chloride and N-methylimidazole

A sulfonium salt derived from tosyl chloride and N-methylimidazole was successfully used as an effective condensing agent for the preparation of high-molecular-weight aromatic polyesters by the direct polycondensation of aromatic dicarboxylic acids and bisphenols. Conditions for the formation of the sulfonium salt and of the reaction of the salt with dicarboxylic acids favorable for the polycondensation were examined. Thermal property of a polymer was investigated in terms of random sequences of monomer in the polymer backbone. Preparation of a polyamide and a polyesteramide was attempted with limited success.     

Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

High-molecular-weight poly(p-phenyleneterephthalamide) by the direct polycondensation reaction with triphenyl phosphite

Poly(p-phenyleneterephthalamide) of high molecular weight was obtained when the polycondensation of terephthalic acid and p-phenylenediamine was carried out in N-methylpyrrolidone (NMP) that contained dissolved CaCl₂ and LiCl in the presence of pyridine. The molecular weight of the polymer obtained varied with the amount of pyridine relative to the metal salts and with the molar ratios of CaCl₂ to LiCl, the maximum η_inh value of 4.5 being obtained under the conditions Py/(CaCl₂ + LiCl) ≈ 2.5 (mol/mol), CaCl₂/LiCl ≈ 1.2 (mol/mol), and LiCl + CaCl₂ ≈ 4 g. Among the solvents tested, NMP was significantly effective for the reaction. Polycondensations of several combinations of other dicarboxylic acids and diamines were carried out with limited success.