Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Modeling of interface phenomena in liquid under vibration, using the chemical model

An analysis of interface phenomena in a liquid under a vibration field is presented, based on the chemical model of vibration in a liquid. The objects studied are a bubble, a solid surface, and a linear macromolecule, in a vibrated liquid. It is concluded that many sonochemical phenomena can be realized in some different (two or more) mechanisms, and mutually stimulate. Inharmonic effects and the influence of distant neighbors are analyzed.     

Interferences in ultratrace speciation of organolead and organotin by gas chromatography with atomic spectrometric detection

Interferences in trace and ultratrace speciation analysis of organotin and organolead compounds in various samples by gas chromatography coupled with atomic absorption spectrometry (AAS) and/or microwave induced plasma atomic emission spectrometry (MIP AES) are investigated. Particular attention is given to the effects of matrix co-extractives and reagents impurities introduced during sample preparation. Their influence on the detection limits is discussed in terms of baseline noise level, blank value, formation of artefacts and signal suppression. Loss of column resolution during the analysis of some matrices is observed.     

Development of an autoclave curing system for fibre reinforced polymer composites

An autoclave curing system has been developed and fabricated which is capable of curing both flat and contoured fibre reinforced polymer composite components. The system can operate at up to 20 bar pressure whilst achieving a 0·1-bar vacuum within the lay-up film bagging. Cure temperatures of up to 180°C were achieved using a stepwise temperature controlling system, which enabled the dwell temperature to be maintained within a ±1 °C tolerance.     

Role of radicals in UV‐initiated postplasma grafting of poly‐ε‐caprolactone: An electron paramagnetic resonance study

Electron paramagnetic resonance (EPR) measurements were performed on poly‐ε‐caprolactone (PCL) films at different stages of the postplasma‐grafting process. PCL films prepared by solvent casting (SC) or electrospinning (ESP) yield very similar EPR spectra after Ar‐plasma treatment and subsequent exposure to air, but the EPR signal is much stronger in the PCL‐ESP films. The free radicals appear to be mainly, and possibly exclusively, oxygen centered. The radicals generated by UV irradiation in PCL‐ESP films were studied in situ with EPR, using a UV‐LED (λ = (285 ± 5) nm). Their EPR spectrum is distinctly different from the plasma‐induced signal, indicative of carbon‐centered radicals, and appears to be independent of the plasma pretreatment. UV‐induced homolytic splitting of (hydro)peroxide bonds was not observed. Both the plasma‐ and UV‐induced radicals decay at room temperature (RT), even in an inert atmosphere. This study demonstrates the potential of electrospun films and UV‐LEDs for the study of plasma‐ and UV‐generated free radicals with EPR in polyesters, and raises questions with respect to the validity of some generally accepted molecular mechanisms underpinning the postplasma grafting technique for polyesters. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Lichens as biomonitors for the determination of polycyclic aromatic hydrocarbons (PAHs) in Caracas Valley,Venezuela

Biomonitoring of PAH air pollution using lichens was carried out. Sixteen PAHs were studied in 11 locations along the valley of Caracas (Venezuela). The results of this work indicate that 14 of the 16 analysed PAHs were highly accumulated into the lichen thalli of Pyxine coralligera Malme. PAH levels in the samples revealed that the several volatile PAHs (naphthalene, acenaphtylene, acenaphtene, and fluoranthene) have the highest levels in the majority of the studied locations. The fluoranthene/pyrene and phenantrene/antracene ratios suggested that the major sources of PAHs are anthropogenic, mainly associated with gasoline and diesel combustion (pyrolytic) and unburnt oil derivates (petrogenic). The total PAH concentrations obtained in the present study were in the range of 0.24 to 9.08?µg/g, similar to those reported by other works in European and Asian cities.     

Alien limit cycles near a Hamiltonian 2-saddle cycle

It is known that perturbations from a Hamiltonian 2-saddle cycle Γ can produce limit cycles that are not covered by the Abelian integral, even when it is generic. These limit cycles are called alien limit cycles. This phenomenon cannot appear in the case that Γ is a periodic orbit, a non-degenerate singularity, or a saddle loop. In this Note, we present a way to study this phenomenon in a particular unfolding of a Hamiltonian 2-saddle cycle, keeping one connection unbroken at the bifurcation. To cite this article: M. Caubergh et al., C. R. Acad. Sci. Paris, Ser. I 340 (2005).     

Control of continuous sedimentation of ideal suspensions as an initial and boundary value problem

We present the control of continuous sedimentation in an ideal thickener as an initial and boundary value problem and construct the entropy solution.     

Surface‐enhanced Raman scattering and density functional theory studies of bis(4‐aminophenyl)sulfone

Raman and surface‐enhanced Raman scattering (SERS) spectra of dapsone by using colloidal silver nanoparticles have been recorded. Density functional theory was used for the optimization of ground state geometries and simulation of the vibrational spectrum of this molecule. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman as well as the SERS normal modes and the corresponding assignments, along with the modeling of the free dapsone and the one in the presence of the colloidal silver nanoparticles, the importance of the sulfone group on the SERS effect in dapsone was inferred. Copyright © 2009 John Wiley & Sons, Ltd.     

Eucalyptus nitens: nanomechanical properties of bark and wood fibers

In this study, Eucalyptus nitens species was nano-characterized to determine variability in nanomechanical properties within the cellular ultra-structure between the bark and wood fibers. Three factors, including site (2 levels), family (2 levels) and fiber type (bark and wood) were analyzed using three response variables, including the elastic modulus (E), hardness (H) and ductility ratio (E/H) in the middle lamella (ML) and the cell wall within the S2 layer. The results indicated significant differences for E _S2 and H _S2 when comparing fiber types: E _S2≈12.52 GPa and H _S2≈0.31 GPa for wood fiber and E _S2≈10.81 GPa and H _S2≈0.26 GPa for bark fiber. There is not statistically significant difference in ductility ratio (E/H) in S2 and ML between fiber types. These results indicate that bark and wood fibers can be used together or separately in the development of new composite materials and engineering products.