聚丙烯表面的生物相容性修饰: 表面氨基放大还原胺化接枝磷酰胆碱

在氨气氛中对聚丙烯薄膜表面进行等离子处理, 获得了不同浓度的表面氨基. 表面氨基的数量经1,6-己二异氰酸酯键合三(2-氨乙基)胺可成倍增加. 用还原胺化法将磷酰胆碱醛共价接枝到表面氨基上获得了磷酰胆碱改性的聚丙烯薄膜. X射线光电子能谱(XPS)测定结果表明, 接枝磷酰胆碱基团的表面覆盖率可达20%～40%. 衰减全反射傅立叶变换红外(ATR-FTIR)和动态接触角测定结果也都说明磷酸胆碱基团被成功地接枝于聚丙烯表面. 还原胺化法结合等离子处理及表面氨基放大技术, 有望成为获取新型生物材料的一种有效途径.     

The role of salts derived from benzilic acid and quinolines in the adsorption of some actinides Part I: Characterization of the adsorbers

The salt of the 8-hydroxyquinoline and benzilic (diphenylglycolic) acid was prepared and incorporated into active charcoal in order to have an adsorber able to concentrate actinides dispersed in natural waters before quantitative or radiochemical analysis. The formation and the characterization of this adsorber, (adsorber B), was compared with another system containing benzilic salt of the substituted quinoline, 2-methyl, 8-hydroxyquinoline, (adsorber R). The adsorption ability of the adsorbers B and R was compared with a third product (adsorber G), prepared by incorporating benzilic acid with d-glucosamine into the charcoal. In this case, d-glucosamine gives a better stability to the system, as otherwise the benzilic acid could partially be dissolved into the water system at equilibrium, during the adsorption experiments. The dissociation acid constants of all the considered components were measured, in order to have some information on the adsorption mechanism. The compound formed during the adsorption on the prepared adsorbers with uranium, thorium, and samarium were separately analyzed and identified by means of IR and NMR. The role of the components in the adsorption was evidenced. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quasiclassical trajectory calculations to evaluate a kinematic constraint on internal energy in suprathreshold collision energy abstraction reactions

Experimentally observed product quantum state distributions across a wide range of abstraction reactions at suprathreshold collision energies have shown a strong bias against product internal energy. Only a fraction, sometimes quite a small fraction, of the energetically accessible product quantum states are populated. Picconatto et al. [J. Chem. Phys. 114, 1663 (2001)] noted a simple mathematical relationship between the highest-energy rovibrational states observed and the kinematics of the reaction system. They proposed a reaction model based on reaction kinematics that quantitatively explains this behavior. The model is in excellent agreement with measured quantum state distributions. The assumptions of the model invoke detailed characteristics of reactive trajectories at suprathreshold collision energies. Here we test those assumptions using quasiclassical trajectory calculations for the abstraction reactions H+HCl-->H2+Cl, D+HCl-->HD+Cl, and H+DCl-->HD+Cl. Trajectories were run on a potential-energy surface calculated with a London-Eyring-Polyani-Sato function with a localized 3-center term (LEPS-3C) previously shown to accurately reproduce experimentally observed product state distributions for the H+HCl abstraction reaction. The trajectories sample collision energies near threshold and also substantially above it. Although the trajectories demonstrate some aspects of the model, they show that it is not valid. However, the inadequacy of the proposed model does not invalidate the apparent kinematic basis of the observed energy constraint. The present results show that there must be some other molecular behavior rooted in the reaction kinematics that is the explanation and the source of the constraint.     

Electrochemical ELISA for the screening of DDT related compounds: analysis in waste waters

An electrochemical enzyme-linked immunosorbent assay (ELISA) for the detection of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p′-DTT), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p′-DDE), 1,1-dichloro-2,2-bis-(4-chlorophenyl)ethane (p,p′-DDD) and o,p-DDT was developed. Optimization of the ELISA competition conditions, led to similar response for the p,p′-isomers. The activity of the label enzyme (horseradish peroxidase) was measured electrochemically using 3,3′,5,5′-tetramethylbenzidine as substrate. The use of purified antiserum for p,p′-DDT resulted in a sensitive assay with a detection limit of 40 pg ml⁻¹ and R.S.D. ranging from 1 to 3% intra-day and 3 to 6% inter-day. No matrix effect for waste water samples of different origin has been evidenced. The ELISA was used to detect DDTs in 20 samples after extraction in diethylether. This method appears suitable for routine screening of DDTs without sample pre-treatment other than dilution in PBS or after organic solvent extraction if high sensitivity is required.     

Analytical characterization of bioactive fluoropolymer ultra-thin coatings modified by copper nanoparticles

Copper–fluoropolymer (Cu-CFx) nano-composite films are deposited by dual ion-beam sputtering. The extensive analytical characterization of these layers reveals that inorganic nanoparticles composed of Cu(II) species are evenly dispersed in a branched fluoropolymer matrix. In particular, X-ray photoelectron spectroscopy has been employed to study the surface chemical composition of the material and to assess how it changes on increasing the copper loading in the composite. Transmission electron microscopy reveals that the copper nanoclusters have a mean diameter of 2–3 nm and are homogeneously in-plane distributed in the composite films. Electrothermal atomic absorption spectroscopy has been used to study the kinetics of copper release in the solutions employed for the biological tests. The Cu-CFx layers are employed as bioactive coatings capable of inhibiting the growth of target microorganisms such as Saccharomyces cerevisiae, Escherichia coli, Staphylococcus aureus, and Lysteria. The results of the analytical characterization enable a strict correlation to be established among the chemical composition of the material surface, the concentration of copper dissolved in the microorganisms broths, and the bioactivity of the nano-structured layer.     

Reaction du meta-diisopropyl-phenyllithium-chrometricarbonyle avec le monoxyde de carbone

The complex CpV(CO)₃THF has been prepared in THF solution (i) photochemically from CpV(CO)₄, and (ii) from [CpV(H)(CO)₃]^?/[Ph₃C]⁺ at low temperatures. THF is replaced by [CpV(H)(CO)₃]^? to form [{CpV(CO)₃}₂-μ-H]^?, and by various ligands L with C, η²-CC, Sn, N, O, S, Se or Te functionality to yield CpV(CO)₃L and cis-[CpV(CO)₂LL] (LL = bipy, o-phen, tolane). The δ (⁵¹V) values range over ca. 1400 ppm and allow the assignment of distinct coordination modes for ambidentate ligands. The temperature gradient is ca. +1.2 ppm/deg. For [CpV(SnCl₃)(CO)₃]^? (δ ?1340 ppm rel. to VOCl₃), ¹J(⁵¹V-^117,119Sn) is 900 Hz. The isotope effect on introducing ¹²CO for ¹³CO in CpV(CO)₄ is ?0.48(2) ppm; ¹J(⁵¹V-¹³C) 107 Hz.