Polymerization of mono- and α,ω-dicarbanionic polystyryl-barium—II. Effect of added lithium salt in THF

The propagation rate of polystyryl-barium was studied in THF at 20°, in the presence of small amounts of lithium chloride. These kinetic results furnish a new method for the determination of triple ion formation in both mono- and α,ω-dicarbanionic polystyryl-barium. The constant of triple ion association of monocarbanionic (PS^?)₂Ba, K_T, was found to be 3.7 × 10⁵ l M^?1, close to the value calculated from published data.

The triple ion association constant of α,ω-dicarbanionic PS^2?Ba²⁺, K_DT, is about 1.2 × 10⁶ l M^?1.

Taking into account the cyclic structure of α,ω-dicarbanionic PS^2?Ba²⁺ and a statistical factor 3 between K_T and K_DT, it is concluded that mono- and dicarbanionic polystyryl-barium have similar abilities for triple ion formation. Nevertheless, stronger associations are observed for dicarbanionic oligomers with a degree of polymerization lower than 5–7.     

Production and Purification of Pectinase from Bacillus subtilis 15A-B92 and Its Biotechnological Applications

Enzymes that degrade pectin are called pectinases. Pectinases of microbial origin are used in juice clarification as the process is cost-effective. This study screened a pectinase-producing bacterium isolated from soil and identified as Bacillus subtilis 15A B-92 based on the 16S rRNA molecular technique. The purified pectinase from the isolate showed 99.6 U/mg specific activity and 11.6-fold purity. The molecular weight of the purified bacterial pectinase was 14.41 ± 1 kD. Optimum pectinase activity was found at pH 4.5 and 50 °C, and the enzyme was 100% stable for 3.5 h in these conditions. No enzymatic inhibition or activation effect was seen with Fe²⁺, Ca²⁺, or Mg²⁺. However, a slight inhibition was seen with Cu²⁺, Mn²⁺, and Zn²⁺. Tween 20 and 80 slightly inhibited the pectinase, whereas iodoacetic acid (IAA), ethylenediaminetetraacetate (EDTA), urea, and sodium dodecyl sulfate (SDS) showed potent inhibition. The bacterial pectinase degraded citrus pectin (100%); however, it was inactive in the presence of galactose. With citrus pectin as the substrate, the Km and Vmax were calculated as 1.72 mg/mL and 1609 U/g, respectively. The high affinity of pectinase for its substrate makes the process cost-effective when utilized in food industries. The obtained pectinase was able to clarify orange and apple juices, justifying its application in the food industry.     

Anderson localization for multi-dimensional systems at large disorder or large energy

We prove that discrete Schrödinger operators on ^d with a random-potential have almost-surely only pure point spectrum and exponentially decaying eigenfunctions for large disorder or large energy. This is the first proof of localization for multi-dimensional Anderson models.Groupe de recherche 048 du CNRS     

Universal scaling in transient creep

We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling of pressure solution transient creep is explained using an analogy with spinodal dewetting.     

On a boundary layer problem for the nonlinear Boltzmann equation

This article deals with a boundary-layer problem arising in the kinetic theory of gases when the mean free path of molecules tends to zero. The model considered here is the stationary, nonlinear Boltzmann equation in one dimension with a slightly perturbed reflection boundary condition. We restrict our attention to the case of hard spheres collisions, with Grad's cutoff assumption. Existence, uniqueness and asymptotic behavior are derived by means of energy estimates.     

Commissioning of a multi‐beamline femtoslicing facility at SOLEIL

The investigation of ultrafast dynamics, taking place on the few to sub‐picosecond time scale, is today a very active research area pursued in a variety of scientific domains. With the recent advent of X‐ray free‐electron lasers (XFELs), providing very intense X‐ray pulses of duration as short as a few femtoseconds, this research field has gained further momentum. As a consequence, the demand for access strongly exceeds the capacity of the very few XFEL facilities existing worldwide. This situation motivates the development of alternative sub‐picosecond pulsed X‐ray sources among which femtoslicing facilities at synchrotron radiation storage rings are standing out due to their tunability over an extended photon energy range and their high stability. Following the success of the femtoslicing installations at ALS, BESSY‐II, SLS and UVSOR, SOLEIL decided to implement a femtoslicing facility. Several challenges were faced, including operation at the highest electron beam energy ever, and achievement of slice separation exclusively with the natural dispersion function of the storage ring. SOLEIL's setup also enables, for the first time, delivering sub‐picosecond pulses simultaneously to several beamlines. This last feature enlarges the experimental capabilities of the facility, which covers the soft and hard X‐ray photon energy range. In this paper, the commissioning of this original femtoslicing facility is reported. Furthermore, it is shown that the slicing‐induced THz signal can be used to derive a quantitative estimate for the degree of energy exchange between the femtosecond infrared laser pulse and the circulating electron bunch.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Electronic properties of 2H-stacking bilayer MoS2 measured by terahertz time-domain spectroscopy

Bilayer (BL) molybdenum disulfide (MoS₂) is one of the most important electronic structures not only in valleytronics but also in realizing twistronic systems on the basis of the topological mosaics in moiré superlattices. In this work, BL MoS₂ on sapphire substrate with 2H-stacking structure is fabricated. We apply the terahertz (THz) time-domain spectroscopy (TDS) for examining the basic optoelectronic properties of this kind of BL MoS₂. The optical conductivity of BL MoS₂ is obtained in temperature regime from 80 K to 280 K. Through fitting the experimental data with the theoretical formula, the key sample parameters of BL MoS₂ can be determined, such as the electron density, the electronic relaxation time and the electronic localization factor. The temperature dependence of these parameters is examined and analyzed. We find that, similar to monolayer (ML) MoS₂, BL MoS₂ with 2H-stacking can respond strongly to THz radiation field and show semiconductor-like optoelectronic features. The theoretical calculations using density functional theory (DFT) can help us to further understand why the THz optoelectronic properties of BL MoS₂ differ from those observed for ML MoS₂. The results obtained from this study indicate that the THz TDS can be applied suitably to study the optoelectronic properties of BL MoS₂ based twistronic systems for novel applications as optical and optoelectronic materials and devices.     

THE REACTION OF TERMINAL PHOSPHINIDENE COMPLEXES WITH ELECTRON-RICH ALKYNES: A NEW APPROACH TO THE PHOSPHOLE RING

Abstract

The reaction of electron-rich alkynes such as ethoxyacetylene or propynyldiethylamine with a transient terminal phosphinidene complex such as [PhP?W(CO)₅] directly yields the corresponding phosphole complexes via a formal [2 + 2 + I] cycloaddition involving two molecules of alkyne and one phosphorus center.     

Goodness-Of-Fit Tests Based on Estimated Expectations of Probability Integral Transformed Order Statistics

New goodness-of-fit tests, based on bootstrap estimated expectations of probability integral transformed order statistics, are derived for the location-scale model. The resulting test statistics are location and scale invariant, and are sensitive to discrepancies at the tails of the hypothesized distribution. The limiting null distributions of the test statistics are derived in terms of functionals of a certain Gaussian process, and the tests are shown to be consistent against a broad family of alternatives. Critical points for all sample sizes are provided for tests of normality. A simulation study shows that the proposed tests are more powerful than established tests such as Shapiro-Wilk, Cramér-von Mises and Anderson-Darling, for a wide range of alternative distributions.