Quantitative analysis of six pesticides in fruits by capillary electrophoresis-electrospray-mass spectrometry

A method to identify and quantify six pesticide residues - dinoseb, pirimicarb, procymidone, pyrifenox, pyrimethanil, and thiabendazole - in peaches and nectarines using capillary electrophoresis-electrospray ionization-quadrupole ion trap-tandem mass spectrometry (CE-ESI-MS/MS) is described. Separation was carried out using a buffer of 0.3 M ammonium acetate at pH 4 with 10% methanol. Pesticide residues present in peach and nectarine samples were preconcentrated by solid-phase extraction using C(18), eluted with CH(2)Cl(2), concentrated to dryness, and redissolved in buffer to obtain lower detection limits. The recoveries of the analytes ranged from 58 to 99% and the relative standard deviations were 9 to 19%. Under optimized CE-MS/MS conditions the minimum detectable levels for the six pesticides in spiked peach samples were between 0.01 mg/kg for pirimicarb and 0.05 mg/kg for procymidone with pressure injection of 50 mbar for 5 s (5 nL) at a signal-to-noise ratio of 3, which constitutes a severalfold increase in sensitivity compared to CE-MS, using a single quadrupole, and to conventional CE-UV. The potential of the method was demonstrated by analyzing different samples taken from regional agricultural cooperatives. The pesticides most often detected were thiabendazole and procymidone.     

An effective enantioselective approach to the securinega alkaloids: total synthesis of (-)-norsecurinine

[reaction: see text] A highly versatile approach to the enantioselective synthesis of securinega alkaloids is presented. Crucial steps are a palladium-catalyzed enantioselective imide alkylation, a vinylogous Mannich reaction, and a ring-closing metathesis process. Through this strategy, the synthesis of (-)-norsecurinine has been accomplished in nine steps and 11% overall yield.     

Additivity of the lanthanide induced chemical shifts in rigid compounds with two identical functional groups

The NMR spectra of anemonin, tetrahydroanemonin and cis-bicyclo[3.3.0]octane-3,7-dione, rigid compounds with two identical functional groups, in the presence of Eu(FOD)₃ are studied. The additivity of the lanthanide induced chemical shifts due to “coordination” of europium atoms at both functions is shown, while the trans configuration of the lactone rings of anemonin and the cis ring fusion in bicyclo[3.3.0]octane-3,7-dione is confirmed.     

Plastic crystals and their potential use in new technologies

The paper gives some comments about the potential use of plastic crystals in energy storage. The main point deals with the possibilities of binary solid solution formation. Three binary phase diagrams in the pentaerythritol series are commented on.     

A History of Fischer-Tropsch Wax Upgrading at BP—— from Catalyst Screening Studies to Full Scale Demonstration in Alaska

Conversion of Fischer-Tropsch wax into high quality synthetic crude or finished transportation fuels such as premium diesel has been studied over the past 15 years within BP. Catalyst screening and selection was carried out in dedicated micro-reactors and pilot plants, whose designs are critical to the performance selection. Variation in catalyst composition and defining the gas to oil feed ratios with the operating temperature are a few of the parameters studied. Product selection and maximizing diesel yield combined with stability (catalyst life) were the ultimate drivers. The selected catalyst was then tested under commercial conditions in a dedicated 300 barrel per day demonstration plant. The products were also tested in engines to assess their combustion characteristics.     

Evaluation of the Fate of Aldicarb and Its Metabolites in Oranges

Abstract

The accumulation, persistence and fate of systemic pesticide aldicarb was melencholy evaluated in orange crops. The concentration of this pesticide and its two toxic metabolites, aldicarb sulfoxide and aldicarb sulfone was determined in leaves, rind and pulp of three orange varieties (Satsuma, Navelina and Clemetina de Nules) and in the top soil of the orange groves. The groves were located in two different places in the Valencia Community (Spain). The analysis showed that the aldicarb concentration was lower than those of aldicarb sulfoxide and aldicarb sulfone. In all cases, the residues persisted at least 160 days in vegetable samples and between 157 and 227 days in soil samples. Residue concentrations measured in the soil samples were highly variable but a relation with the organic matter content can be observed. The residue levels found in vegetal products were higher in leaves than in rind, and in rind than in pulp. The maximum residue values were obtained between 47 and 70 days after the application. One hundred days after treatment (Security period) the residue levels of total fruit were lower than the maximum residue level of 0.2 mg/kg established by law.     

Aryl‐Copper(III)‐Acetylides as Key Intermediates in CCsp Model Couplings under Mild Conditions

The mechanism of copper‐mediated Sonogashira couplings (so‐called Stephens–Castro and Miura couplings) is not well understood and lacks clear comprehension. In this work, the reactivity of a well‐defined aryl‐Cu^III species ( 1 ) with p‐R‐phenylacetylenes (R=NO₂, CF₃, H) is reported and it is found that facile reductive elimination from a putative aryl‐Cu^III‐acetylide species occurs at room temperature to afford the C_aryl?C_sp coupling species ( I_R ), which in turn undergo an intramolecular reorganisation to afford final heterocyclic products containing 2H‐isoindole ( P , P , P_Ha ) or 1,2‐dihydroisoquinoline ( P_Hb ) substructures. Density Functional Theory (DFT) studies support the postulated reductive elimination pathway that leads to the formation of C?C_sp bonds and provide the clue to understand the divergent intramolecular reorganisation when p‐H‐phenylacetylene is used. Mechanistic insights and the very mild experimental conditions to effect C_aryl?C_sp coupling in these model systems provide important insights for developing milder copper‐catalysed C_aryl?C_sp coupling reactions with standard substrates in the future.     

Determination of abamectin in citrus fruits by liquid chromatography-electrospray ionization mass spectrometry

Liquid chromatography coupled to electrospray mass spectrometry (LC-ES-MS) with positive ion detection was used to determine abamectin in oranges. MS conditions were optimized to achieve maximum sensitivity. The main ion for abamectin was [M+Na]+ at a fragmentor voltage of 180 V. Abundant structural information can be obtained at different fragmentor voltages. The detection limit for the standard solution was 12 pg injected, and good linearity and reproducibility were observed. Abamectin residues were extracted using matrix solid-phase dispersion. Orange samples were homogenized with C18 bonded silica placed onto a glass column and eluted with dichloromethane. Recoveries of the abamectin from oranges fortified with approximately 0.01-10 mg/kg ranged from 94 to 99% with an overall average recovery of 96%. The quantification limit is 0.0025 mg/kg, which means detection limit for this analyte could be set at a few hundred picograms per gram of fruit. The presence in the electrosprayed solution of numerous citrus constituents did not interfere significantly with the ionization process of abamectin. The assay procedure provides a simple, rapid, and sensitive method for monitoring residues in oranges. The method was applied to field treatment orange samples.     

Solid-phase extraction of quaternary ammonium herbicides

This paper highlights recent advances in the solid-phase extraction (SPE) of quaternary ammonium herbicides in water, soil, plant and biological samples. After a brief introduction summarizing the properties of quaternary ammonium herbicides and the difficulties involved in measuring them, attention is paid primarily to solid supports used for isolation and concentration, pre-treatments required for the different matrices, and eluents applied for quantitative desorption of these analytes. The determination techniques used after SPE and applications of the proposed SPE methodology are also briefly discussed.