Measuring intracellular calcium fluxes in high throughput mode

The measurement of intracellular calcium fluxes in real time is widely applied within the pharmaceutical industry to measure the activation of G-protein coupled receptors (GPCRhyp;s), either for pharmacological characterisation or to screen for new surrogate ligands. Initially restricted to G(q) coupled GPCRs, the introduction of promiscuous and chimeric G-proteins has further widened the application of these assays. The development of new calcium sensitive dyes and assays has provided sensitive, homogeneous assays which can be readily applied to high throughput screening (HTS). In this paper we describe the full automation of this assay type using a fluorometric imaging plate reader (FLIPR ) integrated into a Beckman/Sagian system to establish a simple robotic system that is well suited for the current medium throughput screening in this area of lead discovery. Using a recently completed HTS we discuss important determinants for FLIPR based screening, highlight some limitations of the current approach, and look at the requirements for future automated systems capable of keeping up with expanding compound files.     

Synthesis and base hydrolysis kinetics of the nitrile complexes [Co(tetren)NCR]3+ (R=Me,Ph and p-MeOC6 H4) and the synthesis and kinetics of formation of the tetrazolato complexes [Co(tetren)N4R]2+ (R=Me and Ph; tetren=1,11-diamino-3,6,9-triazaundecane) by reaction with azide ion

The N-bonded nitrile complexes -[Co(tetren)NCR]³⁺ (R=Me, Ph, p-MeOC₆ H₄) have been prepared by the reaction of -[Co(tetren)OH₂]³⁺ with the corresponding nitrile. The kinetics of base hydrolysis have been studied by pH-stat methods. The reactions involve an SN₁CB displacement of the nitrile to give the hydroxopentamine; nucleophilic attack at the nitrile carbon to give the corresponding carboxamido complex does not occur. NaN₃ reacts with the nitrile complexes in slightly acidic solution (pH ca. 5.7) to give the tetrazolato complexes [Co(tetren)N₄ R]²⁺ (R=Me, Ph) which have been characterised. The reaction of azide ion with -[Co(tetren)NCMe]³⁺ has been studied kinetically. The reaction is biphasic involving the initial rapid formation of the N₁-bonded (5-methyltetrazolato) pentaminecobalt(III) complex with k=2×10^–2dm³ mol^–1s^–1 at 25°C followed by the slow isomerisation to the N₂-bonded complex with k=3.5×10^–5s^–1 at pH 5.7.     

The preparation of copper(II) and copper(I) salts in acetonitrile using group VA and VB pentafluorides

Copper(II) fluorine reacts with the pentafluorides, TaF₅, PF₅, and AsF₅, in acetonitrile to give solvated Cu^II, hexafluoroanion salts. These react with copper metal to give the corresponding Cu^I compounds. Similar reactions occur between AsF₅ and silver(I) or thallium(I) fluorides, but silver(II) fluoride reacts with MeCN, and Ag^I hexafluoroarsenate is formed. PF₅ oxidises Cu slowly in MeCN to give Cu^I hexafluorophosphate, but AsF₅ has no oxidising ability towards metals in MeCN. Spectroscopic data for Cu(MF₆)₂·5MeCN and Cu(MF₆)·4MeCN (M = Ta or P) are discussed.     

Applicability of microwave induced plasma optical emission spectrometry (MIP-OES) for continuous monitoring of mercury in flue gases

The applicability of microwave-induced plasma optical emission spectrometry (MIP-OES) for continuous monitoring of the environmentally hazardous element mercury in flue gases has been studied. Microwave induced plasmas have been sustained using both a TM₀₁₀ cavity (Beenakker resonator) and a so-called Surfatron. The analytical figures of merit for mercury in argon and helium discharges with both types of low-power micro-wave discharges have been examined. To determine mercury in artificial stack gases non-mixed argon/nitrogen discharges have been tested using a tangential flow torch design which allows to introduce a metal-loaded nitrogen gas flow as external gas and argon as internal gas. The addition of main flue gas components such as water vapour (concentration <6 g/m³), oxygen (<4% v/v) and carbon dioxide (<15% v/v) decrease the mercury line intensities to a considerable extent. Trace gases (CO, HCl, SO₂, NO) in concentrations typical to waste incineration processes have been found to have no effect on the mercury and the argon line intensities. The detection limit of mercury in nitrogen is 8 g/m³ using the TM₀₁₀ MIP and 10 g/m³ using the Surfatron. As such low detection limits are below the emission limit values of present-day environmental legislation MIP-OES is useful for on-line monitoring of mercury.Dedicated to Professor Dr. Dieter Klockow on the occasion of his 60th birthday     

The effect of triethylenetetraamine (Trien) on the ion flotation of Cu(2+) and Ni(2+)

Ion flotation is a separation process involving the adsorption of a surfactant and counterions at an air/aqueous solution interface. It shows promise for removing toxic heavy metal ions from dilute aqueous solutions. Here we report the effect of a neutral chelating ligand, triethylenetetraamine (Trien), on the ion flotation of cations with dodecylsulfate, DS(-), introduced as sodium dodecylsulfate, SDS. Ion flotation in the aqueous SD-Cu(II)-Ca(II)-Trien system gave strongly preferential removal of Cu(II) over Ca(II), which is a reversal of the order of selectivity seen in the SDS-Cu(II)-Ca(II) system containing no Trien. The removal rates of Cu(2+) and Ni(2+) with DS(-) were much faster in the presence of Trien than for simple aquo ions, and the final metal concentration was significantly lower. Surface tension measurements showed that Trien enhanced the surface activity and adsorption density for SDS-Cu(II) and SDS-Ni(II) solutions. The overall change in the Gibbs free energy for adsorption resulting from complexation was -3.60 kJ/mol for Cu(II) and -3.50 kJ/mol for Ni(II). This included the effects of hydrophobic interactions between the metal-Trien complexes at the air/solution interface, along with changes in the amount of dehydration associated with cosorption of the metal-Trien complex with DS(-) at the air/solution interface.     

A robust spin-coated optical sensing device for rapid determination of predominant metal ions in wastewater streams

The potential of an optical sensing material for determination of metal ions in wastewater streams is presented. The initial results in the development of a chromo-ionophore-based optical sensor for metal ions are detailed. An azo dye species, 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (BrPADAP), together with an ionophore and plasticiser was immobilised in a film of poly(vinyl chloride) (PVC). Initial investigations using the dye-impregnated sensing film showed a reproducible and reversible response to Pb(II) ions in aqueous solution. The response of this sensing film to Pb(II) at pH 6 was found to be linear in the 0.1-10 mg/L range, with a %RSD of 1.55%. The film can be regenerated by immersion in a low-pH buffer solution. The authors demonstrate how this method shows potential for analysis using once-off sensing probes. The sensing film response for Pb(II) occurs within 30 s.