Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

A Validated HPLC Method with Fluorescence Detection for the Determination of Droperidol in Pharmaceutical Tablets,Human Serum,and Human Milk

A sensitive and simple HPLC method with fluorimetric detection has been developed for determination of droperidol in pharmaceutical tablets, human serum, and human milk. Chromatography was performed on a 100 mm × 3 mm i.d. C₁₈ column with methanol–water, 30:70 (v/v), pH 3.5, as mobile phase at a flow-rate of 0.8 mL min⁻¹. The injection volume was 5 μL and detection was by monitoring emission at 324 nm after excitation at 283 nm. Droperidol and p-hydroxybenzoic acid (internal standard) eluted after 5.3 and 6.1 min, respectively. The method was validated over the concentration range 1.14 × 10⁻⁷ to 9.12 × 10⁻⁶ M. Selectivity was good and the limits of detection and quantitation of the method were approximately 3.54 × 10⁻⁸ and 1.07 × 10⁻⁷ M, respectively, corresponding to 13 and 40 ng mL⁻¹. The applicability of the method to determination of droperidol in pharmaceuticals, human serum, and human milk was demonstrated.

     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

A theoretical analysis of the explanation of the significant differences in antiferromagnetic interactions between homologous μ-alkoxo and acetate bridged dicopper(II) complexes: ab initio and semi-empirical calculations

A magnetostructural classification of dimmers, containing the Cu (μ-alkoxo) Cu core, based on data obtained from X-ray diffraction analysis reported in the literature has been performed. In these complexes, the local geometry around the copper ions is generally a square planar and each copper ion is surrounded by one N atom and three O atoms. The influence of the overlap interactions between the bridging ligands and the metal (Cu) d orbitals on the super-exchange coupling constant has been studied by means of ab initio Restricted Hatree–Fock molecular orbital calculations. The interaction between the magnetic d orbitals and highest occupied molecular orbitals of the acetate oxygens has been investigated in homologous μ-acetato-bridged dicopper(II) complexes which have significantly different −2J values (the energy separation between the spin-triplet and spin-singlet states). In order to determine the nature of the fronter orbitals, Extended Hückel molecular Orbital calculations are also reported. Ab initio restricted Hartree–Fock calculations have shown that the acetato bridge and the alkoxide bridge contribute to the magnetic interaction countercomplementarily to reduce antiferromagnetic interaction.     

Trace and major element compositions of Black Sea aerosol

Instrumental neutron activation analysis (INAA), flame atomic absorption spectrometry (FAAS), flame atomic emission spectrometry (FAES), graphite furnace atomic absorption spectrometry (GF-AAS), ion chromatography (IC) and visible spectrometry (VIS) were used to determine the composition of atmospheric aerosols, collected at a rural site in the Western Black Sea Coast of Turkey. A total of 354 daily aerosol samples were analyzed for 46 trace and major elements and ions. Sample preparation, quality control procedures, instrumental operating conditions for INAA and source apportionment work is presented.     

Butyl methacrylate based monoliths with different cross‐linking agents using DMF‐aqueous buffer as porogen

A simple porogen containing only DMF and aqueous buffer was used for synthesis of monolithic stationary media for CEC). Butyl methacrylate (BMA)‐based capillary monoliths were obtained using proposed porogen together with acrylic/methacrylic cross‐linking agents with different alkyl chain lengths. For this purpose, ethylene glycol dimethacrylate, butanediol dimethacrylate and hexanediol diacrylate (HDDA) were used. The monoliths with better electrochromatographic separation performance were obtained when the acrylic cross‐linking agent with the longest alkyl chain length (i.e. HDDA) was used with the proposed porogen. The electrochromatographic separation of alkylbenzenes, phenols and benzoic acids were sucessfully performed in CEC particularly using poly(BMA‐co‐HDDA) monolithic stationary phase with the column efficiency up to 270 000 plates/m.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

A new type of monodisperse porous, hydrophilic microspheres with reactive chloroalkyl functionality: synthesis and derivatization properties

A seeded polymerization method based on a new functional monomer, 3-chloro-2-hydroxypropyl methacrylate (HPMA-Cl), was proposed for the synthesis of a new type of monodisperse porous, hydrophilic microspheres with reactive character. By applying the method, poly(3-chloro-2-hydroxypropyl methacrylate-co-ethylene dimethacrylate) (poly(HPMA-Cl-co-EDMA)) microspheres in the range of 4–7 μm, with specific surface areas between 2 and 146 m²/g, were obtained. The microspheres are hydrophilic in nature due to the hydroxyl groups and are easily derivatizable due to the reactive chloropropyl moiety. Ligands in the form of small molecules carrying hydrophobic alkyl or hydrophilic ion exchanger groups were covalently attached onto the microspheres via simple and one-pot reactions via their chloropropyl functionality. Using the same functionality, click chemistry and surface-initiated atom transfer radical polymerization were also applied for the generation of triazole ring and zwitterionic molecular brushes on the microspheres, respectively. Poly(HPMA-Cl-co-EDMA) microspheres seem to be a promising hydrophilic reactive material particularly for the synthesis of ion exchanger resins and chromatographic stationary phases.     

The synthesis of [2], [3] and [4]rotaxanes and semirotaxanes

The cucurbituril-catalysed synthesis of [2], [3] and [4]semirotaxanes allows access to regioselectively pure, 1,3-disubstituted mono-, bis- and tris-triazoles in high yield after dethreading.