Computer-aided multichannel detection in high-performance liquid chromatography

Summary The development of a computer-aided rapid-scanning detector for HPLC based on the linear photodiode array UV-visible spectrophotometer is described. Chomatograms monitored at up to three wavelengths, with automatic capture of spectra for eluted peaks and post-run processing of spectral data to generate log₁₀ (A) spectra, second derivative and fourth derivative spectra, are described. Methods are reported for the analysis of forensic samples of diacetylmorphine (heroin) in the presence of the degradation products and potential contaminants caffeine, papaverine, 6-acetylcodeine, thebaine, 6-acetyl-morphine, procaine and morphine separated by HPLC. The novel use of second and higher derivative spectra for the qualitative characterisation of drugs and contaminants separated by HPLC is described.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Charge state separation for protein applications using a quadrupole time-of-flight mass spectrometer

A novel method for separating ions according to their charge state using a quadrupole time-of-flight mass spectrometer is presented. The benefits of charge state separation are particularly apparent in protein identification applications at low femtomole concentration levels, where in conventional TOF MS spectra peptide ions are often lost in a sea of chemical noise. When doubly and triply charged tryptic peptide ions need to be filtered from singly charged background ions, the latter are suppressed by two to three orders of magnitude, while from 10-50% of multiply charged ions remain. The suppression of chemical noise reduces the need for chromatography and can make this experimental approach the electrospray equivalent of conventional MALDI peptide maps. If unambiguous identification cannot be achieved, MS/MS experiments are performed on the precursor ions identified through charge separation, while the previously described Q2-trapping duty cycle enhancement is tuned for approximately 1.4 of the precursor m/z to enhance intensities of ions with m/z values above that of the precursor. The resulting product ion spectra contain few fragments of impurities and provide quick and unambiguous identification through database search. The multiple charge separation technique requires minimal tuning and may become a useful tool for analysis of complex mixtures.     

Monitoring of sources of clinical exposure to nickel

Due to the widespread uses of Ni and Ni alloys, patients undergoing medical treatments can experience inadvertent exposure to the metal, present as a contaminant in fluids for intravenous administration or released from surgical implants and other medical devices. Because of the risk of acute allergic reactions in Ni-sensitive subjects, sources of metal exposure within medical care and its concentrations in biological fluids of potentially exposed patients should be periodically monitored, using reliable analytical procedures, which include strict measures of contamination control. The results of a recent survey on the concentrations of Ni and other potentially toxic metals in human albumin solutions are reported.     

Progression of Organic Reactions on Resin Supports Monitored by Single Bead FTIR Microspectroscopy

We report the time courses of five solid-phase reactions obtained using single bead FTIR microspectroscopy. This time-resolved information aided in the determination of the required reaction time, the nature of the solid-phase reaction, and resin property, effectively assisting in the initial phase of our combinatorial chemistry efforts. Our results showed that solid-phase organic reactions proceed faster than generally speculated. In addition, we have shown that reactions on the surface and in the interior of the bead occur at the same rate for reactions studied. The reaction on the TentaGel resin was shown to be not faster than reactions on Wang resin, suggesting that the diffusion of the substrate into polystyrene bead copolymerized with 1% divinylbenzene is not rate-limiting. Finally, the capability of obtaining IR spectra from the partial surface of a single bead demonstrated the femtomolar detection limit of single bead FTIR microspectroscopy.     

Bestimmung von Aminosäuresequenzen in α-Keratose

Zusammenfassung Aus einem durch Trypsinabbau von -Keratose erhaltenen Gemisch von Peptiden wurden 15 neutrale, 5 saure und 2 basische Peptide durch Kombination papierchromatographischer und papierelektrophoretischer Methoden getrennt und in sehr geringen Mengen isoliert. Es wurden neben der Aminosäurezusammensetzung 14N-terminale Aminosäuren sowie einige Teilsequenzen in den untersuchten Peptiden ermittelt.Die mittlere Kettenlänge der Peptide beträgt 5,8 Aminosäuren.Mit 1 Tabelle3. Mitt. über Untersuchungen an -Keratose. 2. Mitt.:M. Fell undE. Schnabel, Hoppe-Seyler's Z. physiol. Chem.333, 218 (1963).     

Comparative evaluation of methods for assessing peak homogeneity in liquid isocratic reversed-phase chromatography

A significant problem in the development of an automated system for the interpretation of chromatographic profiles is the detection of cases of co-elution without the use of a considerable amount of computer time or intervention by a human operator. A partial solution to this problem is offered by a range of tests which can be implemented on a suitable microcomputer to provide an estimate of peak homogeneity. Several such tests are described and their application to the three-dimensional data sets produced by a photodiode-array detector is illustrated. The sensitivity of each of the different tests to the presence of a second component varies according to the relative amplitude, separation and spectral similarity of the two components. The extent of this variation is assessed for each of the tests and an indication is given of the reliability of each method under typical chromatographic conditions.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

The relationship between membrane surface pore characteristics and flux for ultrafiltration membranes

Surface porosities of Amicon XM100A and XM300 membranes have been measured by electron microscopy and found to be less than 1 per cent. From the measured pore size distributions it is deduced that 50 per cent of the solvent flow is through 20 to 25 per cent of the pores.The conventional model for concentration polarisation in ultrafiltration (UF), which assumes a homogeneously permeable membrane surface, has been modified to account for regions of differing permeability. An effective free area correction factor (≤ 1.0) has been introduced to allow for the effect of membrane surface properties on gel-polarised UF flux.Ultrafiltration experiments with protein solutions and membranes with a range of water fluxes confirm that gel-polarised UF flux is dependent on membrane permeability and surface properties. Effective free area correction factors vary from about 0.4 to 1.0 with values < 1.0 obtained for membranes with water fluxes typically < 150 1/m² hr at 100 kPaSupport for the effective free area concept in UF is provided by an analogy between a gel-polarised UF membrane and a composite reverse osmosis membrane. In both cases the magnitude of the upper ‘controlling’ resistance may be influenced by the pore size and spacing of the lower supporting structure.