Air monitoring of volatile aromatic compounds by means of long-term exposure diffusive samplers

Results obtained by using "Analyst", a long-term diffusive sampler, in some monitoring campaigns, performed for the determination of benzene and the volatile aromatic pollutants, in five cities of the Italian Umbria Region and at the city of Forlì, are presented and discussed. First results of an inter comparison between the "Analyst" and "radial-type" diffusive samplers, carried out by the Regional Agency for the Ambient Protection (ARPA) of Forlì, point out substantial advantages with the long-time sampling devices.     

Within the Ischemic Penumbra,Sub-Cellular Compartmentalization of Heat Shock Protein 70 Overlaps with Autophagy Proteins and Fails to Merge with Lysosomes

The brain area which surrounds the frankly ischemic region is named the area penumbra. In this area, most cells are spared although their oxidative metabolism is impaired. area penumbra is routinely detected by immunostaining of a molecule named Heat Shock Protein 70 (HSP70). Within the area penumbra, autophagy-related proteins also increase. Therefore, in the present study, the autophagy-related microtubule-associated protein I/II-Light Chain 3 (LC3) was investigated within the area penumbra along with HSP70. In C57 black mice, ischemia was induced by permanent occlusion of the distal part of the middle cerebral artery. Immunofluorescence and electron microscopy show that LC3 and HSP70 are overexpressed and co-localize within the area penumbra in the same cells and within similar subcellular compartments. In the area penumbra, marked loss of co-localization of HSP70 and LC3-positive autophagy vacuoles, with lysosomal-associated membrane protein 1 (LAMP1) or cathepsin-D-positive lysosome vacuoles occurs. This study indicates that, within the area penumbra, a failure of autophagolysosomes depends on defective compartmentalization of LC3, LAMP1 and cathepsin-D and a defect in merging between autophagosomes and lysosomes. Such a deleterious effect is likely to induce a depletion of autophagolysosomes and cell clearing systems, which needs to be rescued in the process of improving neuronal survival.     

Characterization of porosity in a 19th century painting ground by synchrotron radiation X-ray tomography

The study of the early oeuvre of the Swiss painter Cuno Amiet (1868–1961) has revealed that, up to 1907, many of his grounds were hand applied and are mainly composed of chalk, bound in protein. These grounds are not only lean and absorbent, but also, as Synchrotron radiation X-ray microtomography has shown, porous. Our approach to the characterization of pore structure and quantity, their connectivity, and homogeneity is based on image segmentation and application of a clustering algorithm to high-resolution X-ray tomographic data. The issues associated with the segmentation of the different components of a ground sample based on X-ray imaging data are discussed. The approach applied to a sample taken from “Portrait of Max Leu” (1899) by Amiet revealed the presence of three sublayers within the ground with distinct porosity features, which had not been observed optically in cross-section. The upper and lower layers are highly porous with important connectivity and thus prone to water uptake/storage. The middle layer however shows low and nonconnected porosity at the resolution level of the X-ray tomography images, so that few direct water absorption paths through the entire sample exist. The potential of the method to characterize porosity and to understand moisture-related issues in paint layer degradation are discussed.     

Ancient silver extraction in the Montevecchio mine basin (Sardinia, Italy): micro-chemical study of pyrometallurgical materials

Different pyrometallurgical materials such as slags, refractory materials and thermally treated lead ores likely related to smelting and extractive processes and chronologically related to Punic and Roman periods (IV–III BC) have been found at Bocche di Sciria and Conca e Mosu in the Montevecchio mine basin (south western Sardinia, Italy), where archaeological findings and classical authors locate extractive metallurgy activities since pre-Roman times. By means of the combined use of X-ray diffraction (XRD), scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectrometry (EDS), selected-area X-ray photoelectron spectroscopy (XPS) and optical microscopy (OM), micro-chemical and micro-structural investigations have been carried out in order to identify the nature of the pyrometallurgical materials, to decipher the processes carried out there and their technological steps and to determine the technological level of competence reached by the ancient metallurgists. The results confirm that the findings can be associated with smelting and extractive processes carried out close to the metal ore deposits first for the argentiferous lead production and, then, for the silver recovery via a cupellation process. Finally, the results disclose the high level of technological competence of the ancient metallurgists able to carry out complex high-temperature processes to treat the argentiferous lead ores and to recover low amounts of silver via high-temperature lead-selective oxidation.     

Freezing of a Lennard-Jones fluid: from nucleation to spinodal regime

Using molecular dynamics, we investigate the crystal nucleation in a Lennard-Jones fluid as a function of the degree of supercooling. At moderate supercooling, a nucleation picture applies, while for deeper quenches, the phenomenon progressively acquires a spinodal character. We show that in the nucleation regime, the freezing is a two-step process. The formation of the critical nucleus is indeed preceded by the abrupt formation of a precritical crystallite from a density fluctuation in the fluid. In contrast, as the degree of supercooling is increased, crystallization proceeds in a more continuous and collective fashion and becomes more spatially diffuse, indicating that the liquid is unstable and crystallizes by a spinodal mechanism.     

Radiolabelling of TiO<Subscript>2</Subscript> nanoparticles for radiotracer studies

Industrially manufactured titanium dioxide nanoparticles have been successfully radiolabelled with ⁴⁸V by irradiation with a cyclotron-generated proton beam. Centrifugation tests showed that the ⁴⁸V radiolabels were stably bound within the nanoparticle structure in an aqueous medium, while X-ray diffraction indicated that no major structural modifications to the nanoparticles resulted from the proton irradiation. In vitro tests of the uptake of cold and radiolabelled nanoparticles using the human cell line Calu-3 showed no significant difference in the uptake between both batches of nanoparticles. The uptake was quantified by Inductively Coupled Plasma Mass Spectrometry and high resolution γ-ray spectrometry for cold and radiolabelled nanoparticles, respectively. These preliminary results indicate that alterations to the nanoparticles’ properties introduced by proton bombardment can be controlled to a sufficient extent that their further use as radiotracers for biological investigations can be envisaged and elaborated.     

Insensitivity of leptogenesis with flavor effects to low energy leptonic CP violation

If the baryon asymmetry of the Universe is produced by leptogenesis, CP violation is required in the lepton sector. In the seesaw extension of the standard model with three hierarchical right-handed neutrinos, we show that the baryon asymmetry is insensitive to the Pontecorvo-Maki-Nagakawa-Sakata phases: thermal leptogenesis can work for any value of the observable phases. This result was well known when there were no flavor effects in leptogenesis; we show that it remains true when flavor effects are included.     

Polarization splitter based on a square-lattice photonic-crystal fiber

A three-core polarization splitter based on a square-lattice photonic-crystal fiber is presented. The component separates the input field into two orthogonally polarized beams that are coupled to the horizontal and vertical output ports. The splitter has been designed through modal and beam propagation analysis by employing high-performance codes based on the finite-element method. Results obtained for a device length of 20 mm show extinction ratios as low as -23 dB with bandwidths as great as 90 nm.