Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Catalytic spectrophotometric determination of vanadium in seawaters based on the bromate oxidative coupling reaction of metol and 2,3,4-trihydroxybenzoic acid.

A new, simple, sensitive and selective catalytic method is developed for the determination of vanadium in natural and sea waters. The method is based on the catalytic effect of V(V) and/or V(IV) on the bromate oxidative-coupling reaction of metol with 2,3,4-trihydroxybenzoic acid (THBA). The reaction is followed spectrophotometrically by tracing the oxidation product at 380 and/or 570 nm after 5 min of mixing the reagents. The optimum reaction conditions are 6.4 x 10(-3) mol l-1 of metol, 2.0 x 10(-3) mol l-1 of THBA and 0.16 mol l-1 of bromate at 35 degrees C and in the presence of an activator-buffer solution of 1 x 10(-2) mol l-1 of tartrate (pH = 3.10). Following the recommended procedure, V(V) and/or V(IV) can be determined with linear calibration graphs up to 0.75 ng ml-1 and detection limits, based on the 3Sb criterion, of 0.008 and 0.018 ng ml-1 at 380 and 570 nm, respectively. The developed method was successfully applied, without any separation or preconcentration processes, to the determination of vanadium in natural and seawaters following the direct calibration and standard addition techniques, respectively.     

Highly sensitive and selective catalytic determination of formaldehyde and acetaldehyde

A highly sensitive, simple and selective kinetic method was developed for the determination of ultra-trace levels of formaldehyde and acetaldehyde based on their catalytic effect on the oxidation of N,N-diethyl-p-phenylenediamine (DPD) with hydrogen peroxide. The reaction was monitored spectrophotometrically by tracing the formation of the red-colored oxidized product of DPD at 510nm, within 30s of mixing the reagents. The optimum reaction conditions were: 20mmolL(-1) DPD, 250mmolL(-1) H(2)O(2), 150mmolL(-1) phosphate, 150mmolL(-1) citrate and pH 6.60+/-0.05 at 25 degrees C. Following the recommended procedure, formaldehyde and acetaldehyde could be determined with linear calibration graphs up to 0.50 and 1.4microg mL(-1) and detection limits, based on the 3S(b)-criterion, of 0.015 and 0.035microg mL(-1), respectively. In addition, analytical data for other 10 aldehydes were also presented. The high sensitivity and selectivity of the proposed method allowed its successful application to rain water, mainstream smoke (MSS) and disposed tips of smoked cigarettes (DTSC). A sample aliquot was directly analyzed for its total water-soluble aldehyde content. A second sample aliquot was heated at 80 degrees C for 10min to expel acetaldehyde and the aliquot was analyzed for its content of other water-soluble aldehydes (expressed as formaldehyde equivalent), and acetaldehyde was determined by difference. The analytical results were in excellent agreements with those obtained following the standard HPLC method based on pre-column derivatization with 2,4-dinitrophenylhydrazine. Moreover, published catalytic-spectrophotometric methods for the determination of aldehydes were reviewed.     

A novel kinetic determination of dissolved chromium species in natural and industrial waste water

A highly sensitive, selective and simple kinetic method was developed for the determination of dissolved chromium species based on the catalytic effect of Cr(III) and/or Cr(VI) on the oxidation of 2-amino-5-methylphenol (AMP) with H₂O₂. The fixed time and initial rate variants were used for kinetic spectrophotometric measurements by tracing the oxidized product at 400 nm for 10 min after starting the reaction. Boric acid and Tween-40 exerted pronounced activating and micellar sensitizing effects on the studied redox reaction, respectively. The optimum reaction conditions were: 3.0 mmol l⁻¹ AMP, 0.45 mol l⁻¹ H₂O₂, 0.50 mol l⁻¹ boric acid, 4 v/v% Tween-40, 10 mmol l⁻¹ phosphate buffer and pH 6.45 ± 0.02 at 35 °C. Both Cr(III) and Cr(VI) ions exerted the same catalytic effect on the studied reaction. Linear calibration graphs were obtained for the determination of up to 6.0 ng ml⁻¹ Cr with detection limits of 0.054 and 0.10 ng ml⁻¹ Cr; following the fixed time and initial rate methods, respectively. The proposed method was successfully applied to the speciation and determination of trace levels of dissolved Cr(III) and Cr(VI) in natural and effluents of industrial waste water. The total dissolved Cr(III) and Cr(VI) species was determined first. In a second run, Cr(VI) was determined alone after precipitation of Cr(III) ions in presence of Al(OH)₃ collector, where Cr(III) is then determined by difference. Moreover, published catalytic-spectrophotometric methods for chromium determination were reviewed.     

Modification of AOAC method 973.31 for determination of nitrite in cured meats

A modification of AOAC Method 973.31 is proposed to improve the extraction efficiency of nitrite from cured meat samples and its subsequent quantification based on the diazotization-coupling reaction of sulfanilamide with N-(1-naphthyl)ethylenediamine dihydrochloride (NED). The various experimental parameters were thoroughly investigated. A 5 g meat sample was mixed with 400 mL water; the pH of the mixture was adjusted to 5.5 +/- 0.3 and allowed to stand for 2 h on a water bath at 80 degrees C, with occasional shaking for the complete extraction of nitrite. After quantitative filtration, an aliquot was mixed with chloroacetic-chloroacetate buffer, pH 1.80 +/- 0.05, sulfanilamide, and NED, and the absorbance of the resulting azodye was recorded at 540 nm against water as a reference. Following the recommended procedure, a linear calibration graph was obtained for up to 0.8 microg/mL NO2(-), with a correlation coefficient of 0.9996 and a detection limit (based on the 3 Sb-criterion) of 5.6 ng/mL NO2(-). The proposed method was conveniently applied to various cured meat samples and was validated by comparison with the original AOAC method and by recovery experiments that gave quantitative results (94-98%) with convenient reproducibility. Statistical analysis of the analytical data could not detect any systematic error and revealed the high accuracy and precision of the proposed method.     

A novel kinetic determination of nitrite based on the perphenazine-bromate redox reaction

An extremely sensitive and selective kinetic method was developed for the determination of trace levels of nitrite based on its catalytic effect on the oxidation of perphenazine (PPZ) with bromate in a phosphoric acid medium. The reaction rate was monitored spectrophotometrically by tracing the formation of the red-colored oxidized product of PPZ at 525 nm within 30 sec of mixing. The optimum reaction conditions were 4.0 μmol L⁻¹ PPZ, 0.4 mol L⁻¹ H₃PO₄ and 30 mmol L⁻¹ bromate at 25 °C. Using the recommended procedure, nitrite could be determined with a linear calibration graph up to 4.50 ng mL⁻¹ and a detection limit of 0.07 ng mL⁻¹. The method was conveniently applied to the determination of nitrite in samples of rain, polluted well and formulated waste waters. Moreover, the published kinetic spectrophotometric methods for nitrite determination are reviewed.     

Catalytic Determination of Vanadium Based on the Bromate Oxidative-C oupling Reaction of Metol with Phloroglucinol

 A selective, sensitive and simple catalytic method is developed for the determination of vanadium in natural and highly polluted waste waters. The method is based on the catalytic effect of V^V and/or V^IV on the bromate oxidative-coupling reaction of metol with phloroglucinol (PG). The reaction is followed spectrophotometrically by tracing the oxidation product at 464 nm after 10 minutes of mixing the reagents. The optimum reaction conditions are metol (8.0×10⁻³ M), PG (4.0×10⁻³ M) and bromate (2×10⁻² M) at 35°C and in presence of an activator-b uffer mixture of 5×10⁻² M of each of citric and monochloroacetic acids (pH 2.40). Following the recommended procedure, vanadium can be determined with a linear calibration graph up to 8.0 ng mL⁻¹ and a detection limit, based on the 3s_b criterion, of 0.1 ng mL⁻¹. Spectrophotometric determination of as little as 1.0 ng mL⁻¹ of V^V or V^IV in aqueous solutions gave an average recovery of 98% with relative standard deviations of ?1.8% (n = 5). The proposed method was directly applied to the determination of vanadium in Nile river water and highly polluted industrial wastes. Statistical treatments of analytical results could not detect any systematic error and showed the high accuracy and precision of the developed method. Received November 25, 1999. Revision March 10, 2000.     

Tests for specific nonparametric relations between two distribution functions with applications

Let (X,Y) be a random vector and let G and H be the marginal distributions of X and Y, respectively. In this paper, we propose two tests, one of Kolmogorov‐Smirnov type and the other of Wilcoxon type, for the null hypothesis Ψ(G) = H against the alternative Ψ(G) < H, where Ψ() is a function such that Ψ(G) is a distribution function. The tests are based on the empirical distribution functions of the observations on X and Y, which are dependent. We obtain their asymptotic null distributions. A suspected relationship between the distribution functions of two dependent outcomes can be specified as a hypothesis to be tested in examples like the load sharing models, record values, and auction bidding models. As an application, we consider in detail the problem of testing the effect of load sharing in two component parallel systems.