In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique. 相似文献
In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)Ll and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.
The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), 1H-NMR, 13C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)Ll polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L1 homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements. 相似文献
Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide. 相似文献
In this study, n-type 95 %Bi2Te3-5 %Bi2Se3 thermoelectric materials have been produced by a combined process of gas atomization with subsequent magnetic pulsed compaction and spark plasma sintering, and then we investigated the behavior of transport properties with sintering temperature. The microstructural observation was performed by optical microscopy and scanning electron microscopy. The crystal structures were analyzed by X-ray diffractometer. The mechanical properties were calculated by measuring the density and micro-Vickers hardness of the samples. It was found that with increasing sintering temperature the gaps between powder particles decreases and the grain sizes were coarsened. The mechanical properties shows higher values along the parallel direction compared to the perpendicular direction to the pressing. The transport properties of the thermoelectric material were investigated with variation of the sintering temperatures. The maximum power factor 1.7 × 10?3 Wm?1 K?2 was measured at the sintering temperature of 450 °C. 相似文献
Positivity - In the present paper, we will characterize the boundedness of the generalized fractional integral operators $$I_{\rho }$$ and the generalized fractional maximal operators $$M_{\rho }$$... 相似文献