Über den Einfluß der Struktur stickstoffhaltiger Substanzen bei der Mikrobestimmung von Kohlenstoff und Wasserstoff mit Außenabsorption der Stickoxide

Zusammenfassung Bei der C-H-Bestimmung mit Außenabsorption der Stickoxide wurden bei einer Serie stickstoffhaltiger Substanzen zu hohe Wasserstoffwerte erhalten, während sich bei einer zweiten Serie, mit gleichen Atomgruppen, richtige Werte ergaben. Um dieses verschiedene Verhalten erklären zu können, wurden weitere Substanzen dieser Art dargestellt und analysiert. Dabei konnte beobachtet werden, daß Substanzen mit der Atomgruppe bei der Analyse im allgemeinen zu hohe Wasserstoffwerte geben, während die Anwesenheit von Phenylringen oder OH-Gruppen, in und Stellung wieder zu regelmäßigen Wasserstoffwerten führen.Die Darstellung neuer Verbindungen dieser Art wurde beschrieben. In den Verbindungen, die bei der C-H-Bestimmung zu hohe Wasserstoffwerte gaben, wurden zur Identifizierung einerseits der Stickstoff, anderseits C und H nach einer Methode bestimmt, die die Reduktion der Stickoxide vorsieht. Diese wird beschrieben.

---

Summary Too high hydrogen values were obtained in the C-H-determinations, with external absorption of the nitrogen oxides, in a series of nitrogenous substances, whereas a second series with the same atom groups gave correct results. To explain these divergent behaviors, additional substances were prepared and analyzed. It was then observed that substances with the group yielded too high hydrogen values in general, while the presence of phenyl rings or OH-groups in the and-position led again to uniform hydrogen values. The preparation of the new compounds of this kind is described. In the case of the compounds that gave too high hydrogen values in the C-H-determination, identification was made on one hand by determining the nitrogen, on the other hand by determining the carbon and hydrogen by another method that provides for the reduction of the nitrogen oxides. The latter is described.

---

---

Herrn Univ.-Prof. Dr.Hans Lieb zum 80. Geburtstag gewidmet.     

High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.     

Scattering theory,cross sections,and the lattice of propositions

The asymptotic conditions for the nonrelativistic quantum scattering of a particle by a center of force are derived in terms of a metric on the space of states on a complete orthocomplemented lattice. The flux of particles scattered into a coneC per unit incident flux, averaged over all displacements of the center of force at right angles to the axis of the incident beam, is expressed in terms of the differential cross sectiond/d when the motion is classical, and in terms of the scattering amplitudef when the motion is quantum mechanical. This enables the usual identificationd/d=|f|² to be made.     

Sorption of divalent metal ions on CrPO4

The divalent metal ion sorption (Cu(2+), Cd(2+), Ni(2+), and Pb(2+)) on chromium phosphate (CrPO(4)) was studied as a function of pH, temperature, and concentration of metal ions. The sorption of metal ions is observed to increase with the increase in pH, temperature, and concentration of metal ions in solution. The mechanism of sorption is found to be the exchange of the hydrolyzed metal cations with the protons from solid at high temperature. The sorption at low temperature is found to be accompanied by the precipitation of the corresponding metal phosphates such as Pb(3)(PO(4))(2).     

Experimental evaluation of epithermal neutron self-shielding for 96Zr and 98Mo

In a previous work we experimentally tested some neutron self-shielding calculations methods for thermal absorbers, from which the semi-empirical “sigmoid method” gave the most accurate results. In this work we aim at evaluating the accuracy of this method on the epithermal self-shielding phenomena as compared to the analytical “MatSSF method”. Metallic foils of Zr and Mo were compactly stacked together into small cylinders (or disks) of different thickness, allowing for up to 20 % epithermal self-shielding when irradiated on two channels of the BR1 reactor. A 2 % relative difference between calculated and experimental self-shielding factors was obtained from the MatSSF method when a perpendicular source-sample axial configuration was assumed, while the isotropic or the co-axial configuration alternatives gave up to 10 % relative differences. On the other hand, the sigmoid method gave relative differences of up to 6 % that can be reduced to just 2 % by applying the “effective” epithermal absorption cross-sections for ⁹⁸Mo and ⁹⁶Zr proposed in this work.     

The Determination of Lactate or Acetate in Intravenous Infusions and Haemodialys1S Solutions by 1H NMR Spectroscopy

A ¹H NMR spectroscopic determination for acetate and lactate in intravenous and haemodialysis solutions is reported. The methyl resonances of acetate and lactate were chosen for integration using N-methylurea and sodium acetate, respectively, as internal standards. The results obtained indicate that the quantitative measurements are reproducible. The method provides also a specific identification of the analytes.     

Radiolabelling of TiO<Subscript>2</Subscript> nanoparticles for radiotracer studies

Industrially manufactured titanium dioxide nanoparticles have been successfully radiolabelled with ⁴⁸V by irradiation with a cyclotron-generated proton beam. Centrifugation tests showed that the ⁴⁸V radiolabels were stably bound within the nanoparticle structure in an aqueous medium, while X-ray diffraction indicated that no major structural modifications to the nanoparticles resulted from the proton irradiation. In vitro tests of the uptake of cold and radiolabelled nanoparticles using the human cell line Calu-3 showed no significant difference in the uptake between both batches of nanoparticles. The uptake was quantified by Inductively Coupled Plasma Mass Spectrometry and high resolution γ-ray spectrometry for cold and radiolabelled nanoparticles, respectively. These preliminary results indicate that alterations to the nanoparticles’ properties introduced by proton bombardment can be controlled to a sufficient extent that their further use as radiotracers for biological investigations can be envisaged and elaborated.     

Experimental determination of k 0 , Q 0 , \bar{E}_{r} factors and neutron cross-sections for 41 isotopes of interest in Neutron Activation Analysis

The k ₀ -literature has been reviewed every decade but some of its nuclear data is still more than 30 years old. Sometimes Q ₀ values were adopted from the nuclear data at that time or were experimentally determined by only 1 laboratory. Other isotopes were listed with accurate pairs of (k ₀ , Q ₀ ) values but were also quoted as candidates for redetermination for different reasons (i.e. imprecise cadmium transmission factors, half-lives). In this work we aim at the experimental re-determination of k ₀ and Q ₀ values for 41 isotopes of analytical interest while introducing a methodology for simultaneous $ \bar{E}_{r} $ and Q ₀ determination employing N irradiation channels. In order to satisfy the metrological level required, up to 12 repeats per standard were irradiated in up to 4 irradiation channels of the Belgian Reactor 1 (BR1, SCK?CEN) having a wide spread in neutron characteristics. Our relative percentile differences to the literature values were usually ≤10 % for Q ₀ factors, ≥25 % for $ \bar{E}_{r} $ values and ≤4 % for k ₀ values. Our precision and accuracy are discussed thoroughly.     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

Experimental k 0 and k 0-fission factors for the determination of the n(235U)/n(238U) enrichment levels and correction for 235U fission interferences in samples containing uranium

In 2010 we investigated the applicability of the current k ₀ and k ₀-fission factors for the determination of the n(²³⁵U)/n(²³⁸U) isotopic ratio in multi-elemental samples containing uranium. An overestimation 3–4 % was observed in our determinations when employing the recommended 2003 k ₀-literature. After a recalibration of all our laboratory instruments, a 3 % overestimation was still observed in this work when employing this nuclear data. Therefore we aimed at the experimental re-determination of these composite nuclear constants in order to enhance the reliability of the isotopic ratio determination method and the accuracy of our data-filtering algorithms. New k ₀-fission factors are given for 7 nuclides that are not currently present in the 2012 k ₀-database. Several additional k ₀ factors are introduced for some nuclides in this library. Our k ₀ results are also compared with those recently reported by Blaauw et al.